scholarly journals The Effects of Storage Duration on Nondestructive Deformation, Quasi-Static Compression Strength, Impact Fracture Strength, and Specific Gravity of Eggs from White Leghorn Hens

1981 ◽  
Vol 60 (3) ◽  
pp. 517-522 ◽  
Author(s):  
R.M.G. HAMILTON ◽  
B.K. THOMPSON
Keyword(s):  
Specific Gravity ◽  
Fracture Strength ◽  
Compression Strength ◽  
Impact Fracture ◽  
White Leghorn ◽  
Storage Duration ◽  
Static Compression ◽  
Quasi Static Compression

scholarly journals Analysis of the Strain and Stress Fields of Cardboard Box during Compression by 3D Digital Image Correlation

2010 ◽  
Vol 24-25 ◽  
pp. 103-108 ◽  
Author(s):  
Jeremie Viguié ◽  
P.J.J. Dumont ◽  
P. Vacher ◽  
Laurent Orgéas ◽  
I. Desloges ◽  
...  
Keyword(s):  
Compression Strength ◽  
Compressive Loading ◽  
Image Correlation ◽  
Parallel Plates ◽  
Static Compression ◽  
3D Digital Image Correlation ◽  
Plastic Materials ◽  
Semi Empirical ◽  
And Storage ◽  
Quasi Static Compression

Corrugated boards with small flutes appear as good alternatives to replace packaging folding boards or plastic materials due their small thickness, possibility of easy recycling and biodegradability. Boxes made up of these materials have to withstand significant compressive loading conditions during transport and storage. In order to evaluate their structural performance, the box compression test is the most currently performed experiment. It consists in compressing an empty container between two parallel plates at constant velocity. Usually it is observed that buckling phenomena are localized in the box panels, which bulge out during compression [1]. At the maximum recorded compression force, the deformation localises around the box corners where creases nucleate and propagate. This maximum force is defined as the quasi-static compression strength of the box. The prediction of such strength is the main topic of interest of past and current research works. For example, the box compression behaviour of boxes was studied by Mc Kee et al. [2] and Urbanik [3], who defined semi-empirical formula to predict the box compression strength, as well as by Beldie et al. [4] and Biancolini et al. [5] by finite element simulations. But comparisons of these models with experimental results remain rather scarce and limited.

scholarly journals Relationships of Egg Specific Gravity and Shell Thickness to Quasi-static Compression Tests

1976 ◽  
Vol 55 (4) ◽  
pp. 1282-1289 ◽  
Author(s):  
Malik M. Ahmad ◽  
G.W. Froning ◽  
F.B. Mather ◽  
L.L. Bashford
Keyword(s):  
Specific Gravity ◽  
Shell Thickness ◽  
Compression Tests ◽  
Static Compression ◽  
Quasi Static Compression

Nanaostructure-Dendrite Ti44Cu46Co4Zr6 Composite with Excellent Mechanical Properties

2012 ◽  
Vol 430-432 ◽  
pp. 369-372
Author(s):  
Xin Fang Zhang ◽  
Xiao Qing Guo ◽  
Chang Yin Gao ◽  
Zhi Qiang Jiang
Keyword(s):  
Mechanical Properties ◽  
Solid Solution ◽  
Fracture Strength ◽  
Alloy Design ◽  
High Fracture ◽  
Static Compression ◽  
Good Ductility ◽  
Quasi Static Compression

New bulk nanostructure-dendrite Ti44Cu46Co4Zr6composite with excellent mechanical properties has been fabricated by using copper molder casting through systematic alloy design from binary Ti50Cu50. The results showed that the micro-scaledβ-Ti (M) solid solution embedding on the nanostructured matrix, which resulted in the excellent mechanical properties: high fracture strength (σf=2278 MPa) and good ductility (εp=9.01%) under quasi-static compression.

A COMPARISON OF THE BETA BACKSCATTER AND QUASI-STATIC COMPRESSION METHODS OF MEASURING EGGSHELL STRENGTH

1969 ◽  
Vol 49 (2) ◽  
pp. 157-168 ◽  
Author(s):  
Peter W. Voisey ◽  
J. R. Hunt ◽  
Paul E. James
Keyword(s):  
Specific Gravity ◽  
Shell Thickness ◽  
Eggshell Thickness ◽  
Fracture Force ◽  
Static Compression ◽  
Quasi Static Compression

The beta backscatter technique can be used td predict eggshell thickness, but with less accuracy than obtained from the specific gravity of the egg. Beta backscatter measurements can account for 40% of the variation in shell thickness but only 20% of the variation in fracture force.

Experimental and theoretical study of sandwich composites with Z-pins under quasi-static compression loading

2021 ◽  
pp. 136943322110073
Author(s):  
Erdem Selver ◽  
Gaye Kaya ◽  
Hussein Dalfi
Keyword(s):  
Vinyl Ester ◽  
Failure Modes ◽  
Critical Role ◽  
Sandwich Composites ◽  
Test Results ◽  
Compressive Properties ◽  
Element Analysis ◽  
Static Compression ◽  
Quasi Static Compression ◽  
Good Agreement

This study aims to enhance the compressive properties of sandwich composites containing extruded polystyrene (XPS) foam core and glass or carbon face materials by using carbon/vinyl ester and glass/vinyl ester composite Z-pins. The composite pins were inserted into foam cores at two different densities (15 and 30 mm). Compression test results showed that compressive strength, modulus and loads of the sandwich composites significantly increased after using composite Z-pins. Sandwich composites with 15 mm pin densities exhibited higher compressive properties than that of 30 mm pin densities. The pin type played a critical role whilst carbon pin reinforced sandwich composites had higher compressive properties compared to glass pin reinforced sandwich composites. Finite element analysis (FE) using Abaqus software has been established in this study to verify the experimental results. Experimental and numerical results based on the capabilities of the sandwich composites to capture the mechanical behaviour and the damage failure modes were conducted and showed a good agreement between them.

A NONLINEAR STRAIN-DEPENDENT VARIABLE-ORDER FRACTIONAL MODEL WITH APPLICATIONS TO ALUMINUM FOAMS

Fractals ◽  
2021 ◽  
Author(s):  
WEI CAI ◽  
PING WANG
Keyword(s):  
Power Law ◽  
Variable Order ◽  
Aluminum Foams ◽  
Static Compression ◽  
Fractional Model ◽  
Comparative Results ◽  
The Impact ◽  
Strain Responses ◽  
Strain Dependent ◽  
Quasi Static Compression

In this paper, a power-law strain-dependent variable order is first incorporated into the fractional constitutive model and employed to describe mechanical behaviors of aluminum foams under quasi-static compression and tension. Comparative results illustrate that power-law strain-dependent variable order is capable of better describing stress–strain responses compared with the traditional linear one. The evolution of fractional order along with the porosities or relative densities can be well qualitatively interpreted by its physical meaning. Furthermore, the model is also extended to characterize the impact behaviors under large constant strain rates. It is observed that fractional model with sinusoidal variable order agrees well with the experimental data of aluminum foams with impact and non-impact surfaces.

An Experimental Study on Dynamic Constitutive Relationship of 7075-T651 Aluminum Alloy

2013 ◽  
Vol 816-817 ◽  
pp. 84-89
Author(s):  
Yong Gang Kang ◽  
Yuan Yang ◽  
Jie Huang ◽  
Jing Hang Zhu
Keyword(s):  
Aluminum Alloy ◽  
Constitutive Equation ◽  
Strain Rate ◽  
Split Hopkinson Pressure Bar ◽  
Flow Behavior ◽  
Constitutive Relationship ◽  
Hopkinson Pressure Bar ◽  
Experiment Data ◽  
Static Compression ◽  
Quasi Static Compression

7075-T651 aluminum alloy are widely used in aeronautical applications such as wing panels, but there is no corresponding constitutive model for it now. In this paper, the flow behavior of 7050-T651 aluminum alloy was investigated by Split Hopkinson Pressure Bar (SHPB) and quasi-static compression experiment system. The strain hardening parameters were obtained by quasi-static compression experiment data, and the strain rate hardening parameters at various strain rates (1000-3000s-1) and room temperature, and the thermal softening parameter at various temperatures (20-300°C) where strain rate is 3000s-1 were obtained by SHPB experiment data. Then the constitutive equation of 7075-T651 aluminum alloy is obtained based on Johnson-Cook constitutive equation model.

scholarly journals Prediction of Crushing Response for Metal Hexagonal Honeycomb under Quasi-Static Loading

2018 ◽  
Vol 2018 ◽  
pp. 1-10 ◽  
Author(s):  
Xinyu Geng ◽  
Yufei Liu ◽  
Wei Zheng ◽  
Yongbin Wang ◽  
Meng Li
Keyword(s):  
Mathematical Models ◽  
Static Loading ◽  
Theoretical Basis ◽  
Theoretical Models ◽  
Excellent Correlation ◽  
Static Compression ◽  
Out Of Plane ◽  
Plane Direction ◽  
Element Theory ◽  
Quasi Static Compression

To provide a theoretical basis for metal honeycombs used for buffering and crashworthy structures, this study investigated the out-of-plane crushing of metal hexagonal honeycombs with various cell specifications. The mathematical models of mean crushing stress and peak crushing stress for metal hexagonal honeycombs were predicted on the basis of simplified super element theory. The experimental study was carried out to check the accuracy of mathematical models and verify the effectiveness of the proposed approach. The presented theoretical models were compared with the results obtained from experiments on nine types of honeycombs under quasi-static compression loading in the out-of-plane direction. Excellent correlation has been observed between the theoretical and experimental results.

Sign in / Sign up

Export Citation Format

Share Document