Implementation Of The Flat Beam Technology In Lighting devices Using A Flat Mirror Surface

2021 ◽  
pp. 50-55
Author(s):  
Albert A. Ashryatov ◽  
Dinara K. Churakova
Keyword(s):  
Light Sources ◽  
Mirror Surface ◽  
Practical Application ◽  
Intensity Curve ◽  
Lighting Technology ◽  
Led Light ◽  
Surface Areas ◽  
Flat Mirror ◽  
Lighting Systems ◽  
Flat Beam

The article discusses one of the ways to obtain a contrasting boundary between the illuminated and unlit areas of the object (illumination technology Flat Beam) in LED lighting systems using secondary optics in the form of a flat mirror surface. The results of studies of high-power LED light sources with different emitting surface areas and with three proposed options for fixing a flat mirror surface are presented. It is shown experimentally that the optical system for LED light sources in the form of a flat mirror surface allows changing the luminous intensity curve of LED light sources, converting it in a given plane from a cosine to a concentrated one. This is how the Flat Beam lighting technology is realized. Variants of the practical application of this lighting technology obtained by using a flat mirror surface with LEDs are also proposed.

scholarly journals Elimination of the blinding effect in landscape luminaires

2018 ◽  
Vol 7 (2.13) ◽  
pp. 252
Author(s):  
Albert Ashryatov ◽  
Dinara Churakova
Keyword(s):  
Light Curve ◽  
Light Source ◽  
Light Flux ◽  
Light Distribution ◽  
Light Sources ◽  
Mirror Surface ◽  
Light Emitting ◽  
Lighting Technology ◽  
Initial Task ◽  
Flat Beam

The article presents one of the possible options for implementing the lighting technology "Flat beam" for landscape lighting purposes. One of the possible ways to control the light distribution of a number of light sources based on LEDs with different radiation patterns is considered. As a secondary optics, it is proposed to use a mirror surface that redistributes the light flux of an LED light source. It is indicated that, depending on the initial type of the light-emitting diodes light curve and the features of mounting the mirror surface, the resulting light distribution can vary widely, depending on the initial task that the designer sets for himself.  

Design of Solar-Powered LED Road Lighting System

2019 ◽  
pp. 75-85
Author(s):  
Canan Perdahci ◽  
Hamdi Ozkan
Keyword(s):  
High Pressure ◽  
Renewable Energy Sources ◽  
Junction Temperature ◽  
Mercury Vapour ◽  
Light Sources ◽  
Street Lighting ◽  
Led Light ◽  
Road Lighting ◽  
Lighting Systems ◽  
High Pressure Sodium Lamp

Turkey is rich in terms of renewable energy sources and, therefore, is now encouraging the use of sustainable clean lighting systems in road applications. High pressure sodium lamp is the most widely used type in main roads, but other types of lamps such as mercury vapour lamps or metal halide lamps can be utilized for street lighting. Since it enables energy and money saving, LED light technology has replaced high pressure sodium lamps nowadays. Once solar power system (PV) is integrated with LED lamp for street lighting, the amount of saving and local impact might be enriched. LEDs used as light sources in road lighting luminaires with rising lumen values, decreasing junction temperature, higher colour rendering efficiency, longer lifetime have become more efficient than many light sources with the latest developments. Since the structure of the luminaires in which the LED light sources are used differs from that of the conventional light sources, the optical, thermal and electrical design of the LED luminaires must be considered differently. Thus, this study concentrates upon design considerations and the operating principle of solarpowered LED road lighting luminaire in details. Also, a simple solar panel system was designed and the economical values obtained at the end of 20 years were compared when using the ongrid system and the off-grid system.

scholarly journals An Efficient Method for LED Light Sources Characterization

Electronics ◽  
2019 ◽  
Vol 8 (10) ◽  
pp. 1089 ◽  
Author(s):  
Sara Raggiunto ◽  
Alberto Belli ◽  
Lorenzo Palma ◽  
Piergiovanni Ceregioli ◽  
Massimo Gattari ◽  
...  
Keyword(s):  
Efficient Method ◽  
Least Squares Method ◽  
Color Temperature ◽  
Experimental Setup ◽  
Light Sources ◽  
Careful Study ◽  
Source Characterization ◽  
Led Light ◽  
Lighting Systems ◽  
Led Drivers

Digital LED drivers capable of blending the spectrum of two LED fixtures with different Correlated Color Temperatures through the LEDs’ power supply control are widespread. However, the digital control of lighting systems is possible only after a careful study of the LED’s response, in terms of illuminance and Correlated Color Temperature. The proposed work takes advantage of the Tunable White technology for the realization of an efficient method for LED light source characterization. In order to evaluate how the light changes as a function of the electric power supplied by the LED drivers, an experimental setup to characterize LED light sources has been designed. Starting from the data acquired from the experimental setup, a model for dimming the LED driver and obtaining the desired values of quality of light has been developed. The proposed model is based on the least squares method and its accuracy is evaluated by comparing the obtained values of illuminance and Correlated Color Temperature with those measured by an illuminance spectrophotometer. Results achieved an error of 0.3% for Correlated Color Temperature and 1.5% for illuminance using the proposed approximation functions.

Defectivity Reduction in the Silicon Tough Polishing with Polyamine and Nonions Surfactant Additives

2011 ◽  
Vol 396-398 ◽  
pp. 390-394
Author(s):  
Ming Sun ◽  
Bai Mei Tan ◽  
Xin Huan Niu ◽  
Juan Wang ◽  
Yan Gang He ◽  
...  
Keyword(s):  
Silicon Surface ◽  
Colloidal Silica ◽  
Chelating Agent ◽  
Mirror Surface ◽  
Surface Areas ◽  
Flat Mirror ◽  
Surfactant Additive ◽  
Free Area ◽  
Surface Microroughness

The effects of the polyamine chelating agent and nonions surfactant additive on the surface defectivity reduction in the final polishing of the mono silicon wafers were investigated using high-purity nano colloidal silica based organic alkaline slurry. Experimental results reveal that the chemical enhanced silicon final polishing slurry containing FA/O polyamine chelating agent and FA/O nonions surfactant changed the chemistry character of silicon surface, can realize the chemical uniform etch the surface areas with defects and defect-free area, deeply lower the surface microroughness of silicon polished wafer, achieving defect-free with perfect quality of flat mirror-surface.

scholarly journals Energy­Saving Lighting of Agricultural Premises and its Parameters Calculation

2021 ◽  
Vol 15 (3) ◽  
pp. 28-34
Author(s):  
L. Yu. Yuferev
Keyword(s):  
Energy Saving ◽  
Full Range ◽  
Light Level ◽  
Housing System ◽  
Research Purpose ◽  
Light Sources ◽  
Lighting System ◽  
Led Light ◽  
Lighting Systems ◽  
Provided Examples

he properly selected lighting for livestock farms is noted to ensure the optimal productivity of bred animals and poultry and to generate profit for the enterprise. (Research purpose) The research purpose is to substantiate the parameters of energy-saving lighting for agricultural premises and to develop methods for its calculation. (Materials and methods)  It has been shown that greenhouse farms most often use high and low pressure sodium lamps for lighting, but their spectrum only partially substitutes the natural one. It has been assumed that expanding the spectrum and approximating it to the solar one could improve product quality and yield. It has been stated that incandescent and fluorescent lamps are traditionally used to illuminate livestock and poultry premises, but they cannot create a lighting system with a «dawn - sunset» function, and their spectrum does not correspond to the full range perceived by animals and birds. It has been noted that the LED light sources’ functioning has such features that make the application of standard calculation methods impossible. We obtained formulas for calculating the light level and flux of photons. (Results and discussion) We provided examples of applying the energy-saving lighting systems developed by us in poultry houses with floor housing system, in cowsheds with tethered housing system and in an experimental phyto-laboratory for growing seedlings. It has been found that after replacing the lighting system based on DRL-125 lamps with a new one, with 36 nine-watt LED lamps, the power consumption decreased from 2,250 to 336 watts, the average light level increased and amounted to 90 lux, while the  illumination uniformity and color rendition improved. We have developed a resonant power supply system for LEDs to create lighting systems with a «sunrise - sunset» function. (Conclusions)  We have shown the possibility and provided examples of using the developed by us energy-saving controlled lighting systems based on LED light sources. 

Organic Light Emitting Diodes - Innovative Light Sources

2019 ◽  
pp. 101-107
Author(s):  
Sergei A. Stakharny
Keyword(s):  
Light Source ◽  
Organic Light Emitting Diodes ◽  
Organic Leds ◽  
Light Sources ◽  
High Quality ◽  
Light Emitting ◽  
Organic Light ◽  
Lighting Systems ◽  
Physical Principles ◽  
Prospects Of Application

This article is a review of the new light source – organic LEDs having prospects of application in general and special lighting systems. The article describes physical principles of operation of organic LEDs, their advantages and principal differences from conventional non-organic LEDs and other light sources. Also the article devoted to contemporary achievements and prospects of development of this field in the spheres of both general and museum lighting as well as other spheres where properties of organic LEDs as high-quality light sources may be extremely useful.

scholarly journals Analysis on High-Power Seaport LED Luminaire with Uniform Light Distribution Based on Optimized Lens and Heatsink

2021 ◽  
Vol 11 (9) ◽  
pp. 4035
Author(s):  
Jinsheon Kim ◽  
Jeungmo Kang ◽  
Woojin Jang
Keyword(s):  
Light Source ◽  
High Power ◽  
Heat Dissipation ◽  
Light Emitting Diode ◽  
Light Distribution ◽  
Light Sources ◽  
Led Light ◽  
High Power Led ◽  
Distribution Requirement ◽  
Lighting Application

In the case of light-emitting diode (LED) seaport luminaires, they should be designed in consideration of glare, average illuminance, and overall uniformity. Although it is possible to implement light distribution through auxiliary devices such as reflectors, it means increasing the weight and size of the luminaire, which reduces the feasibility. Considering the special environment of seaport luminaires, which are installed at a height of 30 m or more, it is necessary to reduce the weight of the device, facilitate replacement, and secure a light source with a long life. In this paper, an optimized lens design was investigated to provide uniform light distribution to meet the requirement in the seaport lighting application. Four types of lens were designed and fabricated to verify the uniform light distribution requirement for the seaport lighting application. Using numerical analysis, we optimized the lens that provides the required minimum overall uniformity for the seaport lighting application. A theoretical analysis for the heatsink structure and shape were conducted to reduce the heat from the high-power LED light sources up to 250 W. As a result of these analyses on the heat dissipation characteristics of the high-power LED light source used in the LED seaport luminaire, the heatsink with hexagonal-shape fins shows the best heat dissipation effect. Finally, a prototype LED seaport luminaire with an optimized lens and heat sink was fabricated and tested in a real seaport environment. The light distribution characteristics of this prototype LED seaport luminaire were compared with a commercial high-pressure sodium luminaire and metal halide luminaire.

Sign in / Sign up

Export Citation Format

Share Document