scholarly journals Technological aspects of the final phase of drilling borehole 5G and unsealing Vostok Subglacial Lake, East Antarctica

2014 ◽  
Vol 55 (65) ◽  
pp. 83-89 ◽  
Author(s):  
Valery V. Lukin ◽  
Nikolay I. Vasiliev
Keyword(s):  
Environmental Impact ◽  
Lake Water ◽  
Drilling Fluid ◽  
Water Layer ◽  
Subglacial Lake ◽  
High Rise ◽  
Fresh Frozen ◽  
Vostok Station ◽  
Antarctic Treaty ◽  
Minimal Environmental Impact

AbstractThis paper considers the state of the deep ice borehole 5G at the Russian Antarctic Vostok station after penetration to the surface water of Vostok Subglacial Lake. It discusses the peculiar features of drilling the ‘fresh frozen’ lake water that has risen in the borehole and the technology for subsequent study of the lake water layer via borehole 5G filled with a kerosene–Freon® mixture. The extremely high rise of lake water via the borehole is attributed to a hydraulic fracture at the side of the borehole, which diverted a large amount of drilling fluid. The proposed technology for the study of the water layer envisages minimal environmental impact and excludes penetration of any of the kerosene–Freon® mixture to the water layer. This technology has been presented several times at different international forums. There was no critical comment on the Environmental Impact Assessment of the technology at the 37th Antarctic Treaty Consultative Meeting in 2014 and it was adopted for implementation.

scholarly journals Characterization of subglacial Lake Vostok as seen from physical and isotope properties of accreted ice

2016 ◽  
Vol 374 (2059) ◽  
pp. 20140303 ◽  
Author(s):  
Vladimir Ya. Lipenkov ◽  
Alexey A. Ekaykin ◽  
Ekaterina V. Polyakova ◽  
Dominique Raynaud
Keyword(s):  
Lake Water ◽  
Hydrological Regime ◽  
Gas Content ◽  
Deep Drilling ◽  
Lake Vostok ◽  
Subglacial Lake ◽  
Direct Sampling ◽  
Vostok Station ◽  
Different Depths

Deep drilling at the Vostok Station has reached the surface of subglacial Lake Vostok (LV) twice—in February 2012 and January 2015. As a result, three replicate cores from boreholes 5G-1, 5G-2 and 5G-3 became available for detailed and revalidation analyses of the 230 m thickness of the accreted ice, down to its contact with water at 3769 m below the surface. The study reveals that the concentration of gases in the lake water beneath Vostok is unexpectedly low. A clear signature of the melt water in the surface layer of the lake, which is subject to refreezing on the icy ceiling of LV, has been discerned in the three different properties of the accreted ice: the ice texture, the isotopic and the gas content of the ice. These sets of data indicate in concert that poor mixing of the melt (and hydrothermal) water with the resident lake water and pronounced spatial and/or temporal variability of local hydrological conditions are likely to be the characteristics of the southern end of the lake. The latter implies that the surface water may be not representative enough to study LV's behaviour, and that direct sampling of the lake at different depths is needed in order to move ahead with our understanding of the lake's hydrological regime.

The Research and Application of Cementing Isolation Technology in High Porosity and Permeability of Developed Clastic Rock Reservoir in Tarim Basin

2021 ◽  
Author(s):  
Hongtao Liu ◽  
Zhengqing Ai ◽  
Jingcheng Zhang ◽  
Zhongtao Yuan ◽  
Jianguo Zeng ◽  
...  
Keyword(s):  
Drilling Fluid ◽  
Water Layer ◽  
High Porosity ◽  
Self Healing ◽  
Cement Slurry ◽  
Clastic Rock ◽  
Pump Rate ◽  
Porosity And Permeability ◽  
Zonal Isolation ◽  
High Pump

Abstract The average porosity and permeability in the developed clastic rock reservoir in Tarim oilfield in China is 22.16% and 689.85×10-3 μm2. The isolation layer thickness between water layer and oil layer is less than 2 meters. The pressure of oil layer is 0.99 g/cm3, and the pressure of bottom water layer is 1.22 g/cm3, the pressure difference between them is as bigger as 12 to 23 MPa. It is difficult to achieve the layer isolation between the water layer and oil layer. To solve the zonal isolation difficulty and reduce permeable loss risk in clastic reservoir with high porosity and permeability, matrix anti-invasion additive, self-innovate plugging ability material of slurry, self-healing slurry, open-hole packer outside the casing, design and control technology of cement slurry performance, optimizing casing centralizer location technology and displacement with high pump rate has been developed and successfully applied. The results show that: First, the additive with physical and chemical crosslinking structure matrix anti-invasion is developed. The additive has the characteristics of anti-dilution, low thixotropy, low water loss and short transition, and can seal the water layer quickly. Second, the plugging material in the slurry has a better plugging performance and could reduce the permeability of artificial core by 70-80% in the testing evaluation. Third, the self-healing cement slurry system can quickly seal the fracture and prevent the fluid from flowing, and can ensuring the long-term effective sealing of the reservoir. Fourth, By strict control of the thickening time (operation time) and consistency (20-25 Bc), the cement slurry can realize zonal isolation quickly, which has achieved the purpose of quickly sealing off the water layer and reduced the risk of permeable loss. And the casing centralizers are used to ensure that the standoff ratio of oil and water layer is above 67%. The displacement with high pump rate (2 m3/min, to ensure the annular return velocity more than 1.2 m/s) can efficiently clean the wellbore by diluting the drilling fluid and washing the mud cake, and can improve the displacement efficiency. The cementing technology has been successfully applied in 100 wells in Tarim Oilfield. The qualification rate and high quality rate is 87.9% and 69% in 2019, and achieve zone isolation. No water has been produced after the oil testing and the water content has decreased to 7% after production. With the cementing technology, we have improved zonal isolation, increased the crude oil production and increased the benefit of oil.

scholarly journals Uncertainties in assessing the environmental impact of amine emissions from a CO<sub>2</sub> capture plant

2014 ◽  
Vol 14 (16) ◽  
pp. 8533-8557 ◽  
Author(s):  
M. Karl ◽  
N. Castell ◽  
D. Simpson ◽  
S. Solberg ◽  
J. Starrfelt ◽  
...  
Keyword(s):  
Drinking Water ◽  
Environmental Impact ◽  
Lake Water ◽  
Ground Level ◽  
Model Framework ◽  
Study Region ◽  
Fugacity Model ◽  
Modelling Framework ◽  
Degradation Rates ◽  
Ground Level Air

Abstract. In this study, a new model framework that couples the atmospheric chemistry transport model system Weather Research and Forecasting–European Monitoring and Evaluation Programme (WRF-EMEP) and the multimedia fugacity level III model was used to assess the environmental impact of in-air amine emissions from post-combustion carbon dioxide capture. The modelling framework was applied to a typical carbon capture plant artificially placed at Mongstad, on the west coast of Norway. The study region is characterized by high precipitation amounts, relatively few sunshine hours, predominantly westerly winds from the North Atlantic and complex topography. Mongstad can be considered as moderately polluted due to refinery activities. WRF-EMEP enables a detailed treatment of amine chemistry in addition to atmospheric transport and deposition. Deposition fluxes of WRF-EMEP simulations were used as input to the fugacity model in order to derive concentrations of nitramines and nitrosamine in lake water. Predicted concentrations of nitramines and nitrosamines in ground-level air and drinking water were found to be highly sensitive to the description of amine chemistry, especially of the night-time chemistry with the nitrate (NO3) radical. Sensitivity analysis of the fugacity model indicates that catchment characteristics and chemical degradation rates in soil and water are among the important factors controlling the fate of these compounds in lake water. The study shows that realistic emission of commonly used amines result in levels of the sum of nitrosamines and nitramines in ground-level air (0.6–10 pg m−3) and drinking water (0.04–0.25 ng L−1) below the current safety guideline for human health that is enforced by the Norwegian Environment Agency. The modelling framework developed in this study can be used to evaluate possible environmental impacts of emissions of amines from post-combustion capture in other regions of the world.

An optimal plan for food consumption with minimal environmental impact: the case of school lunch menus

2016 ◽  
Vol 129 ◽  
pp. 704-713 ◽  
Author(s):  
Luca Benvenuti ◽  
Alberto De Santis ◽  
Fabio Santesarti ◽  
Luigino Tocca
Keyword(s):  
Environmental Impact ◽  
Food Consumption ◽  
School Lunch ◽  
Optimal Plan ◽  
Minimal Environmental Impact

A Heideggerian Analysis of Renewable Energy and The Electric Grid

2020 ◽  
Vol 17 (2) ◽  
pp. 291-315
Author(s):  
Rudy Kahsar ◽  
Keyword(s):  
Renewable Energy ◽  
Environmental Impact ◽  
Commodity Chain ◽  
Energy Technology ◽  
Electric Grid ◽  
On Demand ◽  
Positive Expression ◽  
Energy Needs ◽  
Local Sources ◽  
Minimal Environmental Impact

Renewable energy technology is often seen as a positive expression of technology, meeting energy needs with minimal environmental impact. But, by integrating nature (e.g., wind and sunlight) with the ordering of the electric grid, renewables silently convert that nature into what Martin Heidegger referred to as standing reserve—resources of the technological commodity chain to be ordered, controlled, converted, and consumed on demand. However, it may be possible to mitigate the downsides of this process through a transition to more decentralized, local sources of renewable energy operations and management that maintain awareness of the ways in which energy is generated and distributed.

Design for maintainability tool for nano-façade coating applications on high-rise facades in the tropics

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Sheila Conejos ◽  
Aristotle Ubando ◽  
Michael Yit Lin Chew
Keyword(s):  
Environmental Impact ◽  
Quantitative Methods ◽  
Design Stage ◽  
Design Decision ◽  
Safety Measures ◽  
Content Type ◽  
High Rise ◽  
Negative Environmental Impact ◽  
Design For Maintainability ◽  
Façade Coatings

PurposeThe self-cleaning properties of nanostructured titanium dioxide facade coatings are useful in Singapore's tropical climate. However, its potential maintenance issues need to be determined right at the design stage. The purpose of this paper is to highlight the development of the design for maintainability tool which is a multicriteria design decision score sheet that evaluates the maintainability potential of nano-facade coating applications on high-rise façades with concrete and stonemasonry finishes and curtain walls.Design/methodology/approachQuantitative methods (expert and practitioner surveys) are conducted in this research study. Analytic hierarchy process (AHP) and sensitivity analysis were used to develop a robust Design for Maintainability tool.FindingsSafety measures indicator received the highest weighted score by experts, while the maximizing performance, minimizing risk, minimizing negative environmental impact and minimizing consumption of matter and energy were the top ranking main criteria by both experts and practitioners. The top ranked design for maintainability sub-criteria identified by practitioners and experts were risk management, maintenance considerations, climatic conditions, safety measures, lifecycle cost and maintenance access, sun's path, rainfall intensity, biological growth measures and building age profile.Originality/valueMost researches on the maintainability of nano-façade coatings uses experimentation to test the durability of nano-façade coatings, while this study focuses on design based empirical data such as establishing and ranking the list of design for maintainability criteria or indicators to minimize future defects and maintenance issues. The design for maintainability tool contributes to the maintainability of nano-façade coatings leading to maximizing its performance while minimizing cost, risks, resource consumption and negative environmental impact.

Advantages and Basic Areas of Application of Solar Concentrating Modules With Louvered Heliostats

2021 ◽  
pp. 152-181
Keyword(s):  
Energy Consumption ◽  
Environmental Impact ◽  
Energy Saving ◽  
Large Scale ◽  
Tall Buildings ◽  
Effective Energy ◽  
Building Projects ◽  
High Rise ◽  
Low Concentrations ◽  
Reducing Energy

In connection with the large-scale development of high-rise building projects recently in Russia and abroad and their significant energy consumption, one of the main principles in designing is the use of effective energy-saving technologies. Also, important aspects are reducing energy consumption and neutralizing the environmental impact of tall buildings. The most promising areas in the field of integration of solar modules (planar and concentrating) in the construction of buildings are development of BIPV technologies (roofing, film, facade materials), the integration of solar energy concentrators that do not require biaxial tracking (medium and low concentrations) on the facades and roofs of buildings (parabolic concentrators, lenses, and Fresnel mirrors), integration of highly concentrated modules on the roofs of buildings.

Sign in / Sign up

Export Citation Format

Share Document