scholarly journals The Effects of Induced Rotational Hardening and the Translation of Similarity-center and the Validity of Tangential Relaxation in the Subloading Surface Model for Nonproportional Loading

2006 ◽  
Vol 15 (3) ◽  
pp. 307-318
Author(s):  
Hideki Setouchi ◽  
Koichi Hashiguchi
Keyword(s):  
Surface Model ◽  
Nonproportional Loading ◽  
Rotational Hardening

scholarly journals Elaborated subloading surface model for accurate description of cyclic mobility in granular materials

2021 ◽  
Author(s):  
Koichi Hashiguchi ◽  
Tatsuya Mase ◽  
Yuki Yamakawa
Keyword(s):  
Cyclic Loading ◽  
Granular Materials ◽  
Accurate Description ◽  
Surface Model ◽  
Cyclic Mobility ◽  
Mixed Hardening ◽  
Hardening Rule ◽  
Elastic Domain ◽  
Translation Rule ◽  
Rotational Hardening

AbstractThe description of the cyclic mobility observed prior to the liquefaction in geomaterials requires the sophisticated constitutive formulation to describe the plastic deformation induced during the cyclic loading with the small stress amplitude inside the yield surface. This requirement is realized in the subloading surface model, in which the surface enclosing a purely elastic domain is not assumed, while a purely elastic domain is assumed in other elastoplasticity models. The subloading surface model has been applied widely to the monotonic/cyclic loading behaviors of metals, soils, rocks, concrete, etc., and the sufficient predictions have been attained to some extent. The subloading surface model will be elaborated so as to predict also the cyclic mobility accurately in this article. First, the rigorous translation rule of the similarity center of the normal yield and the subloading surfaces, i.e., elastic core, is formulated. Further, the mixed hardening rule in terms of volumetric and deviatoric plastic strain rates and the rotational hardening rule are formulated to describe the induced anisotropy of granular materials. In addition, the material functions for the elastic modulus, the yield function and the isotropic hardening/softening will be modified for the accurate description of the cyclic mobility. Then, the validity of the present formulation will be verified through comparisons with various test data of cyclic mobility.

A Simple Model for Stable Cyclic Stress-Strain Relationship of Type 304 Stainless Steel Under Nonproportional Loading

1999 ◽  
Vol 122 (1) ◽  
pp. 1-9 ◽  
Author(s):  
Takamoto Itoh ◽  
Xu Chen ◽  
Toshimitsu Nakagawa ◽  
Masao Sakane
Keyword(s):  
Stainless Steel ◽  
Cyclic Stress ◽  
304 Stainless Steel ◽  
Surface Model ◽  
Stress Strain ◽  
Nonproportional Loading ◽  
Strain Relationship ◽  
Strain Paths ◽  
Type 304 ◽  
Type 304 Stainless Steel

This paper proposes a simple two-surface model for cyclic incremental plasticity based on combined Mroz and Ziegler kinematic hardening rules under nonproportional loading. The model has only seven material constants and a nonproportional factor which describes the degree of additional hardening. Cyclic loading experiments with fourteen strain paths were conducted using Type 304 stainless steel. The simulation has shown that the model was precise enough to calculate the stable cyclic stress-strain relationship under nonproportional loadings. [S0094-4289(00)00101-8]

Comment on “Thermodynamics of the L 3 (Sponge) Phase in the Flexible Surface Model" by John Daicic et al.

1996 ◽  
Vol 6 (1) ◽  
pp. 91-93 ◽  
Author(s):  
D. Roux ◽  
F. Nallet ◽  
C. Coulon ◽  
M. E. Cates
Keyword(s):  
Surface Model ◽  
Flexible Surface ◽  
Sponge Phase

EVALUASI KETELITIAN HORIZONTAL DARI CITRA TEGAK SATELIT RESOLUSI SANGAT TINGGI MENGGUNAKAN SRTM DAN TERRASAR-X UNTUK PEMETAAN SKALA BESAR

2018 ◽  
Vol 2 ◽  
pp. 535
Author(s):  
Maundri Prihanggo
Keyword(s):  
Control Point ◽  
Ground Control ◽  
Surface Model ◽  
Digital Surface Model ◽  
Check Point ◽  
Ground Control Point

<p>Saat ini, citra satelit resolusi sangat tinggi digunakan dalam berbagai macam aplikasi, terutama pemetaan skala besar. Sebelum dapat digunakan, citra satelit tersebut harus diorthorektifikasi terlebih dahulu. Data <em>Digital Surface Model </em>(DSM) dan <em>Ground Control Point</em> (GCP) adalah dua data utama yang diperlukan saat melakukan orthorektifikasi. Perbedaan data DSM yang digunakan akan menghasilkan perbedaan nilai ketelitian horizontal pada kedua citra tegak hasil orthorektifikasi. Pada penelitian ini digunakan dua jenis DSM yaitu SRTM dan Terrasar-X. Ketelitian vertikal dari SRTM adalah 90 m sedangkan ketelitian vertikal dari Terrasar-X adalah 12,5 m. Penelitian ini berlokasi di Wilayah Buli, Kabupaten Halmahera Timur, Provinsi Maluku. Terdapat tiga sensor citra satelit yang digunakan yaitu Pleiades, Quickbird dan Worldview-2 yang digunakan pada lokasi penelitian. Total GCP yang digunakan adalah 33 titik, tiap titiknya diukur dengan melakukan pengamatan geodetik dan memiliki ketelitian horizontal ≤15 cm dan ketelitian vertikal ≤30 cm. Ketelitian horizontal dari citra tegak satelit resolusi sangat tinggi diperoleh dengan melakukan uji terhadap Independent Check Point (ICP). Total ICP yang digunakan adalah 12 titik, tiap titik ICP diukur dengan metode dan standar yang sama dengan titik GCP. Ketelitian horizontal dengan Circular Error (CE 90) dari citra tegak satelit menggunakan data SRTM adalah 18,856 m sedangkan ketelitian horizontal dengan Circular Error (CE 90) dari citra tegak satelit menggunakan data Terrasar-X adalah 2.168 m . Hasil dari penelitian ini membuktikan bahwa ketelitian vertikal data DSM yang digunakan memberikan pengaruh pada citra tegak satelit hasil orthorektifikasi tersebut. Mengacu pada Peraturan Kepala BIG nomor 15 tahun 2014, citra tegak satelit hasil orthorektifikasi menggunakan data Terrasar-X sebagai DSM memenuhi ketelitian horizontal peta dasar kelas 3 skala 1:5.000 sedangkan citra tegak satelit hasil orthorektifikasi menggunakan data SRTM sebagai DSM tidak dapat memenuhi ketelitian horizontal peta dasar skala besar.</p><p><strong>Kata kunci:</strong> orthorektifikasi, DSM, ketelitian horizontal</p>

Sign in / Sign up

Export Citation Format

Share Document