scholarly journals Variability of Air Voids and Mechanistic Properties of Plant-Produced Asphalt Mixtures

2004 ◽  
Vol 1891 (1) ◽  
pp. 85-97 ◽  
Author(s):  
Louay N. Mohammad ◽  
Zhong Wu ◽  
Chenggang Zhang ◽  
Mohammad J. Khattak ◽  
Chris Abadie
Keyword(s):  
Asphalt Mixtures ◽  
Air Voids

scholarly journals A GPR-Based Pavement Density Profiler: Operating Principles and Applications

2021 ◽  
Vol 13 (13) ◽  
pp. 2613
Author(s):  
Nectaria Diamanti ◽  
A. Peter Annan ◽  
Steven R. Jackson ◽  
Dylan Klazinga
Keyword(s):  
Asphalt Pavement ◽  
Wave Impedance ◽  
Asphalt Mixtures ◽  
Void Content ◽  
Air Voids ◽  
New Instrument ◽  
Pavement Engineering ◽  
And Performance ◽  
Air Void ◽  
Air Void Content

Density is one of the most important parameters in the construction of asphalt mixtures and pavement engineering. When a mixture is properly designed and compacted, it will contain enough air voids to prevent plastic deformation but will have low enough air void content to prevent water ingress and moisture damage. By mapping asphalt pavement density, areas with air void content outside of the acceptable range can be identified to predict its future life and performance. We describe a new instrument, the pavement density profiler (PDP) that has evolved from many years of making measurements of asphalt pavement properties. This instrument measures the electromagnetic (EM) wave impedance to infer the asphalt pavement density (or air void content) locally and over profiles.

scholarly journals Fracture Behavior Analysis of Semi-Circular Bending Test

2019 ◽  
Vol 271 ◽  
pp. 03007
Author(s):  
David Renteria ◽  
Shadi Saadeh ◽  
Enad Mahmoud
Keyword(s):  
Fracture Behavior ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Bending Test ◽  
Random Generation ◽  
Crack Initiation And Propagation ◽  
Air Voids ◽  
Generation Technique ◽  
Initiation And Propagation ◽  
Scb Test

The objective of this paper is to investigate the effect of air voids on the fracture properties of asphalt mixtures using SCB test in Discrete Element Method (DEM). Superpave and Coarse Matrix High Binder (CMHB) mixtures gradation were used to generate the percentages of aggregate, mastic, and air voids within the specimens. Aggregates and air voids were randomly generated for each asphalt mixture case. Model results illustrate that the crack initiation and propagation is controlled by the location of the aggregate particles and air voids in the mixture. Additionally, the absence of air voids above the tip of the notch increases the stiffness of the sample and increase its resistance to failure. The novelty of using DEM and the random generation technique for generating numerical specimens proved to be a useful approach in investigating the properties of the mastic, aggregate and interface as they relate to fracture of asphalt mixtures.

Sewage Sludge as Raw-Material in Asphalt Mixtures

2013 ◽  
Vol 664 ◽  
pp. 638-643 ◽  
Author(s):  
Maria del Pilar Durante Ingunza ◽  
Olavo Francisco dos Santos Júnior ◽  
Sayonara Andrade Medeiros
Keyword(s):  
Mechanical Performance ◽  
Environmental Parameters ◽  
Empty Space ◽  
Asphalt Mixtures ◽  
International Standards ◽  
Raw Material ◽  
Air Voids ◽  
The One ◽  
Consequent Increase ◽  
Space Volume

The aim of this study is to assess the volumetric and mechanical behavior of concrete asphalt mixtures, using natural sludge as a partial substitute for the tiny aggregate and calcined sludge as filler. This assessment was performed based on technical and environmental parameters, using laboratory tests obeying current Brazilian norms, according to international standards. The addition of natural sludge to the mixtures has increased stability, increased air voids contents of the mixtures. The addition has compromised mixture adhesiveness. With respect to the addition of calcined sludge to the mixtures, the mixtures with calcined sludge displayed the same behavior as those with cement. It was observed decrease in empty space volume of the mixtures and consequent increase in empty space-bitumen relation and increased stability. The mixture addition of natural sludge that has the best mechanical and volumetric performance is the one with 7.5% of natural sludge in the granulometric composition of the mixture. The mixture with 1% of calcined sludge had the best volumetric and mechanical performance.

Use of Mechanistic Models to Investigate Fatigue Performance of Asphalt Mixtures

2015 ◽  
Vol 2507 (1) ◽  
pp. 108-119 ◽  
Author(s):  
Jong-Sub Lee ◽  
Nelson Gibson ◽  
Y. Richard Kim
Keyword(s):  
Damage Model ◽  
Asphalt Mixtures ◽  
Fatigue Performance ◽  
Void Content ◽  
Continuum Damage ◽  
Direct Tension ◽  
Air Voids ◽  
Viscoelastic Continuum Damage ◽  
Air Void ◽  
Air Void Content

Effects of design air void contents, design voids in mineral aggregate (VMA), and in-place air voids on the fatigue performance of asphalt mixtures were investigated with mechanistic analyses based on the viscoelastic continuum damage (VECD) analyses and the mechanistic–empirical pavement analysis using the AASHTOWare Pavement ME Design program. The VECD analyses included the simplified viscoelastic continuum damage model at the material level and two structural models: ( a) layered viscoelastic analysis and ( b) layered viscoelastic pavement analysis for critical distresses. The mix design of a 2013 accelerated loading facility test lane was selected to develop the volumetric mix designs with the design air voids of 3%, 4%, and 5%, design VMAs of 13%, 14%, and 15%, and in-place air void contents of 5%, 7%, and 9% with the Bailey method. Dynamic modulus and direct tension cyclic fatigue tests were performed in accordance with the AASHTO TP 107 procedure. The test results showed that the linear viscoelastic property was affected by the design VMA, design air void content, and in-place air void content in order of sensitivity. Also, the damage states at failure determined from the damage characteristic curves and the mechanistic fatigue predictions had consistent trends as observed for the design VMA, in-place air void, and design air void content in rank of sensitivity. Finally, the design VMA, in-place air void, and design air void parameters were found to be sensitive in the mechanistic analyses, whereas the parameter that was most sensitive in the pavement mechanistic–empirical analysis was the in-place air void content.

Influence of Air Voids on Mechanical Properties of Asphalt Mixtures

2011 ◽  
Vol 12 (3) ◽  
pp. 493-524 ◽  
Author(s):  
Emad Kassem ◽  
Eyad Masad ◽  
Robert Lytton ◽  
Arif Chowdhury
Keyword(s):  
Mechanical Properties ◽  
Asphalt Mixtures ◽  
Air Voids

Microstructural analysis of asphalt mixtures using digital image processing techniques

2014 ◽  
Vol 41 (1) ◽  
pp. 74-86 ◽  
Author(s):  
Ki Hoon Moon ◽  
Augusto Cannone Falchetto ◽  
Jin Hoon Jeong
Keyword(s):  
Image Processing ◽  
Digital Image Processing ◽  
Digital Image ◽  
Microstructural Analysis ◽  
Asphalt Mixture ◽  
Material Model ◽  
Asphalt Mixtures ◽  
Recycled Asphalt ◽  
Air Voids ◽  
Processing Techniques

In this paper, the internal microstructure of asphalt mixture is analyzed through digital image processing (DIP) of two-dimensional asphalt mixture images. A set of 12 mixtures prepared with two binders, two air voids percentages, and different recycled asphalt pavement (RAP) contents is used. First, small asphalt mixture beams of the same size of bending beam rheometer specimens are prepared for the images acquisition. Then, based on mixture volumetric properties, a three-phase material model is obtained. Finally, 2- and 3-point correlation functions of the material phases are numerically evaluated. No significant differences were observed in the microstructure and spatial distributions of aggregates, asphalt mastic, and air voids for asphalt mixtures containing up to 40% of RAP. However, an increase in auto correlation length (ACL) was found for RAP mixtures in comparison with the conventional mixtures.

scholarly journals Selecting warm mix asphalt additives by the properties of warm mix asphalt mixtures - China experience

2015 ◽  
Vol 10 (1) ◽  
pp. 79-88 ◽  
Author(s):  
Xinsheng Li ◽  
Zhaoxing Xie ◽  
Wenzhong Fan ◽  
Lili Wang ◽  
Junan Shen
Keyword(s):  
Tensile Strength ◽  
Dynamic Stability ◽  
Asphalt Concrete ◽  
Warm Mix Asphalt ◽  
Asphalt Mixtures ◽  
Air Voids ◽  
Mastic Asphalt ◽  
Stone Mastic Asphalt ◽  
Crushed Aggregate ◽  
Marshall Stability

The objective of this research was to select the most effective warm asphalt additives for mix practice based on a series of laboratory testing programs such as density, Marshall stability, freeze-thaw splitting strength, dynamic stability, and bending beam strain. The experimental design of warm mix asphalt included the use of three commonlyused additives, two typical aggregate gradations, one crushed aggregate, and one modified asphalt. Results showed that: (1) the bulk specific gravity and air voids of all the mix specimens were similar to those of controls; (2) the Marshall stability and flow values of the warm stone mastic asphalt were 6.8%–26.6% and 3.5%–10.3%% higher than those of controls, respectively, and those of the warm asphalt concrete were 6.1%–15.6% and 6.5%–9.7% higher than those of controls, respectively; (3) the indirect tensile strength of two types of mixtures was 1.7%–14.4% lower than that of controls, and the average tensile strength ratio of the warm stone mastic asphalt and asphalt concrete was 4.3% and 1.3% higher than that of controls, respectively; (4) the dynamic stability of warm mix specimens was 10.8%–16.6% lower than that of the controls; (5) the average bending failure strain of warm stone mastic asphalt was 7.6% higher than that of the controls, and that of warm asphalt concrete was 12.8% lower than that of the controls; (6) Overall, warm asphalt mixtures with Sasobit and Rediset had relatively best performances required in Southeast China, where rutting and stripping are the main failures of asphalt pavements.

scholarly journals Evaluation of the Potential of Sasobit REDUX Additive to Lower Warm-Mix Asphalt Production Temperature

Materials ◽  
2019 ◽  
Vol 12 (8) ◽  
pp. 1285 ◽  
Author(s):  
Arminda Almeida ◽  
Michela Sergio
Keyword(s):  
Construction Industry ◽  
Road Construction ◽  
Warm Mix Asphalt ◽  
Asphalt Mixtures ◽  
Asphalt Production ◽  
Air Voids ◽  
Health Concerns ◽  
The Road ◽  
Wide Range ◽  
Production Temperature

Environmental and health concerns have been increasing in the road construction industry. This industry has provided several techniques and a wide range of additives to lower the production temperatures of asphalt mixtures, generating, among others, a new mix type called warm-mix asphalt (WMA). This paper aims to evaluate the potential of the Sasobit REDUX additive to lower the production temperatures of WMA. This additive, which is an alternative to the well-known Sasobit, is completely soluble in bitumen at temperatures above 85 °C while the same temperature for the Sasobit is 115 °C. For that reason, three target compaction temperatures were considered (90, 100 and 110 °C) and both Marshall and compactability tests were carried out. A hot-mix asphalt (HMA) was tested in parallel for comparison. It was concluded that the volumetric properties (air voids content about 4%) and the Marshall properties (stability about 11 kN, flow about 4 mm and Marshall quotient higher than 2 kN/km) of the Sasobit REDUX-WMA were globally satisfactory. In relation to the compactability test, the Sasobit REDUX-WMA mixtures were relatively easier to be compacted compared to the HMA mixture. The three Sasobit REDUX-WMA mixtures (90, 100 and 110 °C) exhibited a very similar compactability (differences lower than 0.4%). Therefore, it seems reasonable to conclude that the Sasobit REDUX has potential to lower WMA production temperatures by 20 °C. A reduction of that magnitude would lead to significant environmental gains.

Impact of Gyration Reduction and Design Specification Changes on Volumetric Properties of Virginia Dense-Graded Asphalt Mixtures

2018 ◽  
Vol 2672 (28) ◽  
pp. 143-153 ◽  
Author(s):  
Stacey D. Diefenderfer ◽  
Benjamin F. Bowers ◽  
Kevin K. McGhee
Keyword(s):  
Aggregate Size ◽  
Asphalt Mixtures ◽  
Design Parameters ◽  
Maximum Aggregate Size ◽  
Volumetric Properties ◽  
Air Voids ◽  
Asphalt Mix ◽  
Production Value ◽  
Virginia Department ◽  
Air Void

In 2015, the Virginia Department of Transportation (VDOT) proposed changes to their specification for asphalt mix design. The changes incorporated a reduction of design gyrations from 65 to 50; the addition of constraints on the No. 4 (4.75 mm) and No. 30 (600 µm) sieves; and adjustments to the production value for voids filled with asphalt and minimum voids in mineral aggregate. Before these modifications were fully adopted, a study was performed to assess the effect of the changes on mixture properties and laboratory performance. Eleven pairs of asphalt mixtures were evaluated; the pairs consisted of a typical VDOT 65-gyration mixture produced under the specification current at the time and a companion 50-gyration mixture designed and produced in accordance with the proposed specification. Mixtures were evaluated to determine the effect of the design parameters on volumetric properties, gradation, and permeability. The changes had very little effect on volumetric properties or gradation. Permeability effects were mixed, with 9.5 mm nominal maximum aggregate size mixtures requiring greater compaction to meet permeability requirements and 12.5 mm nominal maximum aggregate size mixtures showing improved permeability even at higher air-void contents. For the 50-gyration mixtures, core air voids were reduced, indicating the potential for increased durability attributable to improved densification in the field.

Sign in / Sign up

Export Citation Format

Share Document