MICROZINC ALLOY 100

Alloy Digest ◽  
1976 ◽  
Vol 25 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Sliding Friction ◽  
Heat Treating ◽  
Good Resistance ◽  
Coefficient Of Sliding Friction ◽  
Chemical Division ◽  
Processing Differences ◽  
Magnetic Processing

Abstract MICROZINC Alloy 100 is a zinc-lead-cadmium alloy having good ductility with adequate strength, good resistance to corrosion, and a low coefficient of sliding friction. It is solderable and non-magnetic. Processing differences give three commercial products or classes designated= 101, 102 and 103. This alloy does not stain other materials. Its many uses include jewelry, coins and battery cans. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Zn-27. Producer or source: Ball Corporation, Metal and Chemical Division.

MICROZINC ALLOY 190

Alloy Digest ◽  
1976 ◽  
Vol 25 (11) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Copper Alloy ◽  
Atmospheric Corrosion ◽  
Sliding Friction ◽  
Heat Treating ◽  
Coefficient Of Sliding Friction ◽  
Chemical Division ◽  
Processing Differences

Abstract MICROZINC Alloy 190 is a zinc-copper alloy with good atmospheric corrosion resistance and a low coefficient of sliding friction to eliminate galling in service. It has maximum strength commensurate with good ductility and drawability. Processing differences give two commercial products or classes designated 191 and 192. This alloy does not stain other materials. Its many uses include terrazzo strips, eyelets and weatherstrips. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, joining, and surface treatment. Filing Code: Zn-29. Producer or source: Ball Corporation, Metal and Chemical Division.

AMPCOLOY B-2

Alloy Digest ◽  
1977 ◽  
Vol 26 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Iron Alloy ◽  
Heat Treating ◽  
General Purpose ◽  
Good Resistance ◽  
Aluminum Iron ◽  
Copper Aluminum

Abstract AMPCOLOY B-2 is a copper-aluminum-iron alloy for general-purpose uses. It has good machinability, good hot-working characteristics and moderate strength. Its many uses include cams, gears, bushings, bearings, marine equipment and other applications requiring good resistance to corrosion. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Cu-329. Producer or source: Ampco Metal Inc..

COPPER ALLOY No. C34200

Alloy Digest ◽  
1984 ◽  
Vol 33 (5) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Screw Machine ◽  
Thread Rolling ◽  
Channel Plate

Abstract Copper Alloy No. C34200 contains nominally 2% lead and has a machinability rating approaching that of Free-Cutting Brass. It is noted for its excellent thread-rolling and knurling properties. It is used for many screw-machine applications and it has good resistance to corrosion in many environments. Its many applications include channel plate, gears, wheels and components for clocks and watches. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-476. Producer or source: Brass mills.

COPPER ALLOY No. C40800

Alloy Digest ◽  
1984 ◽  
Vol 33 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Electrical Connectors

Abstract Copper Alloy No. C40800 is brass with an addition of tin (nominally 2%). It can be machined and formed successfully. It can be joined by several methods and as good resistance to corrosion. A typical use is electrical connectors but it also can be used for bushings, washers and costume jewelry. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-474. Producer or source: Brass mills.

COPPER ALLOY No. C40500

Alloy Digest ◽  
1984 ◽  
Vol 33 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Small Addition ◽  
Good Resistance

Abstract Copper Alloy No. C40500 is brass containing a small addition of tin. It has moderate strength and good ductlity. Common fabrication processes are blanking, forming and drawing. It can be machined and joined successfully. It has good resistance to corrosion. Among its many uses are terminals, meter clips, contact springs and washers. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-473. Producer or source: Brass mills.

COPPER ALLOY No. C94500

Alloy Digest ◽  
1987 ◽  
Vol 36 (9) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Corrosion Resistant ◽  
Low Strength

Abstract Copper Alloy No. C94500 is a cast bronze containing nominally 73% copper, 20% lead and 7% tin. It has excellent machinability, good casting characteristics, low strength and good resistance to corrosion. It is used for bearings, locomotive wearing parts and for corrosion-resistant castings. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fracture toughness and fatigue. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Cu-528. Producer or source: Copper alloy foundries.

COPPER ALLOY No. 482

Alloy Digest ◽  
1975 ◽  
Vol 24 (11) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Copper Alloy ◽  
Heat Treating ◽  
Zinc Alloy ◽  
Good Resistance ◽  
Copper Zinc ◽  
Machining Characteristics

Abstract COPPER ALLOY No. 482 is a copper-zinc alloy containing a medium-sized (0.4-1.0%) addition of lead to provide free-machining characteristics. It has good mechanical properties and good resistance to corrosion. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-304. Producer or source: Brass mills.

COPPER ALLOY No. 782

Alloy Digest ◽  
1975 ◽  
Vol 24 (10) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Nickel Alloy ◽  
Copper Alloy ◽  
Heat Treating ◽  
Good Resistance ◽  
Copper Zinc ◽  
Cold Workability ◽  
Zinc Nickel

Abstract COPPER ALLOY No. 782 is a copper-zinc-nickel alloy with good cold workability, good machinability, excellent strength and good resistance to corrosion. It is used for a variety of industrial and decorative applications. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-302. Producer or source: Copper and copper alloy mills.

MAGNESIUM AZ91A

Alloy Digest ◽  
1966 ◽  
Vol 15 (7) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Physical Properties ◽  
Die Casting ◽  
Heat Treating ◽  
Casting Alloy ◽  
Good Resistance ◽  
Temperature Performance

Abstract Magnesium AZ91A is a magnesium die casting alloy combining good mechanical properties, good casting characteristics and good resistance to corrosion. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on high temperature performance and corrosion resistance as well as casting, heat treating, machining, joining, and surface treatment. Filing Code: Mg-61. Producer or source: Magnesium Elektron Ltd.

MICROZINC ALLOY 700

Alloy Digest ◽  
1975 ◽  
Vol 24 (12) ◽  
Keyword(s):  
Electrical Conductivity ◽  
Thermal Expansion ◽  
Corrosion Resistance ◽  
Titanium Alloy ◽  
Shear Strength ◽  
Heat Treating ◽  
Corrosion Resistant ◽  
Low Thermal Expansion ◽  
Chemical Division ◽  
Processing Differences

Abstract Microzinc Alloy 700 is a zinc-copper-titanium alloy with good creep strength, good ductility, low thermal expansion, good solderability, and good electrical conductivity. Processing differences give two commercial products or classes designated 701 and 702. This alloy is corrosion resistant and does not stain other materials. Its uses include architectural components and roofing systems. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as creep. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Zn-24. Producer or source: Ball Corporation, Metal and Chemical Division.

Sign in / Sign up

Export Citation Format

Share Document