CRONIFER 2205 LCN

Alloy Digest ◽  
1982 ◽  
Vol 31 (11) ◽  
Keyword(s):  
Stainless Steel ◽  
Heat Exchangers ◽  
Operating Temperature ◽  
Heat Treating ◽  
Chemical Equipment ◽  
Chloride Ions ◽  
Low Carbon ◽  
Duplex Structure ◽  
Temperature Performance ◽  
Resistance To Stress

Abstract CRONIFER 2205 LCN is a low-carbon nitrogen-alloyed stainless steel with a ferritic-austenitic duplex structure. It has excellent resistance to stress-corrosion cracking in solutions containing chloride ions. Its resistance to pitting corrosion is good; both base metal and welded material successfully resist intergranual corrosion of the type that shows up in the Strauss test. For longtime use, the operating temperature should not exceed 300 C (572 F). The uses of CRONIFER 2205 LCN include chemical equipment and heat exchangers using seawater and/or brackish water. This datasheet provides information on composition and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-415. Producer or source: Vereingte Deutsche Metallwerke AG.

SANDVIK 3RE60

Alloy Digest ◽  
1972 ◽  
Vol 21 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
High Resistance ◽  
Heat Treating ◽  
Low Carbon ◽  
Duplex Structure ◽  
Temperature Performance ◽  
Resistance To Stress

Abstract SANDVIK 3RE60 is an extra-low-carbon stainless steel with a duplex structure consisting of ferrite and austenite. It has high resistance to stress-corrosion cracking, good formability and good weldability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-276. Producer or source: Sandvik.

CRONIFER 1713 LCN

Alloy Digest ◽  
1983 ◽  
Vol 32 (5) ◽  
Keyword(s):  
Stainless Steel ◽  
High Temperature ◽  
Brackish Water ◽  
Heat Treating ◽  
Nitrogen Addition ◽  
Chloride Ions ◽  
Low Carbon ◽  
Good Resistance ◽  
Temperature Performance ◽  
Aqueous Chloride

Abstract CRONIFER 1713 LCN is a fully austenitic low-carbon chromium-nickel-molybdenum stainless steel. It contains a nitrogen addition (0.10-0.20%) which helps to stabilize the austenite. Its molybdenum content (4.0-5.0%) provides good resistance to pitting attack by media containing chloride ions. Thus it has good resistance to brackish water and seawater. Typical applications are bleaching plants and equipment for handling aqueous chloride solutions. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-425. Producer or source: Vereingte Deutsche Metallwerke AG.

SANDVIK SAF 2205

Alloy Digest ◽  
1987 ◽  
Vol 36 (7) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Treating ◽  
General Corrosion ◽  
Low Carbon ◽  
Temperature Performance ◽  
Resistance To Stress ◽  
Saf 2205

Abstract SANDVIK SAF 2205 is an extra-low carbon, ferritic-austenitic stainless steel. It has high resistance to stress-corrosion cracking; pitting; service and general corrosion. It has roughly twice the yield strength of austenitic stainless grades and it has good weldability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-487. Producer or source: Sandvik.

SANDVIK SAF 2304

Alloy Digest ◽  
1987 ◽  
Vol 36 (3) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Stainless Steels ◽  
Austenitic Stainless Steels ◽  
Heat Treating ◽  
Low Carbon ◽  
Good Resistance ◽  
Temperature Performance ◽  
Resistance To Stress

Abstract SANDVIK SAF 2304 is a duplex (ferritic-austenitic) stainless steel of extra-low carbon content. Its yield strength is about double that of austenitic stainless steels and it has very good resistance to stress-corrosion cracking. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-483. Producer or source: Sandvik.

SANDVIK SANICRO 28

Alloy Digest ◽  
1984 ◽  
Vol 33 (3) ◽  
Keyword(s):  
Stainless Steel ◽  
Heat Exchangers ◽  
Heat Treating ◽  
Steel Alloy ◽  
Low Carbon ◽  
Gas Wells ◽  
Temperature Performance ◽  
Sanicro 28 ◽  
Corrosive Environments ◽  
Sour Gas

Abstract SANDVIK Sanicro 28 is an all-purpose low-carbon stainless steel alloy for service in highly corrosive environments. It has exceptionally high resistance to various types of corrosive attack and has good weldability. Among its numerous applications are evaporator tubes in the production of phosphoric acid; down-hole tubulars in deep, sour gas wells; piping and heat-exchanger tubes in sulfuric acid service and seawater cooled heat exchangers. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-442. Producer or source: Sandvik. See also Alloy Digest SS-831, September 2001.

BÖHLER A911SA EXTRA

Alloy Digest ◽  
2012 ◽  
Vol 61 (4) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
High Temperature ◽  
Physical Properties ◽  
Stress Corrosion Cracking ◽  
Crevice Corrosion ◽  
Heat Treating ◽  
Temperature Performance ◽  
Resistance To Stress ◽  
Specialty Metals

Abstract Böhler (or Boehler) A911 is a super duplex ferritic-austenitic chromium-nickel-molybdenum stainless steel with excellent resistance to stress-corrosion cracking, pitting, and crevice corrosion. This datasheet provides information on composition, physical properties, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance as well as forming, heat treating, machining, and joining. Filing Code: SS-1119. Producer or source: Böhler-Uddeholm Specialty Metals Inc..

NIROSTA 4429

Alloy Digest ◽  
2000 ◽  
Vol 49 (5) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Pitting Corrosion ◽  
Intergranular Corrosion ◽  
Heat Treating ◽  
Low Carbon ◽  
High Nitrogen ◽  
Temperature Performance ◽  
Pitting Corrosion Resistance

Abstract Nirosta 4429 is a low-carbon, high-nitrogen version of type 316 stainless steel. The low carbon imparts intergranular corrosion resistance while the nitrogen imparts both higher strength and some increased pitting corrosion resistance. It is recommended for use as welded parts that need not or cannot be annealed after welding. This datasheet provides information on composition, physical properties, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-787. Producer or source: ThyssenKrupp Nirosta.

USS 18-18-2 STAINLESS STEEL

Alloy Digest ◽  
1971 ◽  
Vol 20 (4) ◽  
Keyword(s):  
United States ◽  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Heat Treating ◽  
United States Steel Corporation ◽  
Temperature Performance ◽  
Aqueous Chloride ◽  
Resistance To Stress

Abstract USS 18-18-2 Stainless Steel (18% chromium-18% nickel-2% silicon) was developed specifically for superior resistance to stress-corrosion cracking in hot aqueous chloride solutions. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness and creep. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-253. Producer or source: United States Steel Corporation.

ALLEGHENY STAINLESS TYPE 434

Alloy Digest ◽  
1974 ◽  
Vol 23 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Heat Treating ◽  
Low Carbon ◽  
Good Corrosion Resistance ◽  
Temperature Performance ◽  
Continuous Service ◽  
Oxidation Resistant ◽  
Corrosive Environments

Abstract ALLEGHENY STAINLESS TYPE 434 is a low-carbon ferritic stainless steel with good corrosion resistance to mildly corrosive environments and the atmosphere. It is oxidation resistant at temperatures up to 1600 F for intermittent service and up to 1450-1500 F for continuous service. It is used for automotive trim and other exterior environments. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness and fatigue. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-292. Producer or source: Allegheny Ludlum Corporation.

SANDVIK 2RE10

Alloy Digest ◽  
1972 ◽  
Vol 21 (5) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Nitric Acid ◽  
High Resistance ◽  
Heat Treating ◽  
Low Carbon ◽  
High Chromium ◽  
Temperature Performance ◽  
High Nickel

Abstract SANDVIK 2RE10 is a high-chromium, high-nickel, extra-low-carbon austenitic stainless steel with high resistance to oxidizing media such as concentrated nitric acid, high resistance to intergranular corrosion and good structural stability. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: SS-272. Producer or source: Sandvik. See also Alloy Digest SS-491, November 1987.

Sign in / Sign up

Export Citation Format

Share Document