ALCOA ULTRALLOY X6020

Alloy Digest ◽  
1996 ◽  
Vol 45 (12) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Lead Free ◽  
Aluminum Association ◽  
Wire Rod ◽  
Series Alloy ◽  
6Xxx Series

Abstract UltrAlloy is a lead-free, enhanced machining product with the inherent benefits of a 6xxx-series alloy. The alloy is produced as a cold-finished rod and bar with strength levels comparable to 6262. The alloy is registered with the Aluminum Association as X6020. This datasheet provides information on composition, microstructure, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, machining, joining, and surface treatment. Filing Code: AL-340. Producer or source: ALCOA Wire, Rod & Bar Division. Originally published September 1996, corrected December 1996.

ALCOA 6061 COLD FINISHED BAR

Alloy Digest ◽  
1998 ◽  
Vol 47 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Resistance ◽  
High Strength ◽  
Wire Rod ◽  
Good Workability

Abstract Alcoa 6061 alloy has excellent joining characteristics and good acceptance of applied coatings. It combines relatively high strength, good workability, and high resistance to corrosion. The alloy is widely available. The T8 and T9 tempers offer better chipping characteristics than the T6 temper. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as machining and surface treatment. Filing Code: AL-349. Producer or source: ALCOA Wire, Rod & Bar Division.

ALCOA C238

Alloy Digest ◽  
1998 ◽  
Vol 47 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Tensile Properties ◽  
Wire Rod ◽  
Welding Strength ◽  
6Xxx Series

Abstract Alcoa C238 is a cold-finished aluminum wrought product developed for applications requiring postbrazing and welding strength. The alloy has good machinability and roll-threading characteristics. It has slightly lower corrosion resistance as compared to 6xxx series alloys. Alloy C238 has excellent welding and very good brazing properties. Initial applications include fittings and connectors that are brazed and/or welded. This product is also available in cold-heading rod that has been used to cold-form connectors. This datasheet provides information on tensile properties. It also includes information on corrosion resistance as well as machining and joining. Filing Code: AL-353. Producer or source: ALCOA Wire, Rod & Bar Division.

ALCOA 6082

Alloy Digest ◽  
2005 ◽  
Vol 54 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Aluminum Alloys ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
6Xxx Series

Abstract Alloy 6082 is part of the 6xxx series of aluminum alloys. It is similar to 6061, but not quite equivalent in physical properties. It does have higher strength than 6061. The 6082 alloy is used in structural shapes and profiles. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: AL-394. Producer or source: Alcoa Engineered Products.

ALCOA TOOLRITE 2011

Alloy Digest ◽  
1997 ◽  
Vol 46 (3) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Surface Finish ◽  
Deep Drilling ◽  
Machined Surface ◽  
High Productivity ◽  
Wire Rod

Abstract Alcoa Toolrite 2011 is a cold-finished aluminum wrought product and is suggested for applications requiring high productivity without corrosion resistance concerns. The alloy has excellent machinability, unexcelled for free-cutting qualities and good mechanical properties. The alloy has excellent machined surface-finish capability. The T451 and T8 tempers offer good deep drilling characteristics. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as machining, joining, and surface treatment. Filing Code: AL-341. Producer or source: ALCOA Wire, Rod & Bar Division.

WIELAND-BC1 and BD3

Alloy Digest ◽  
2007 ◽  
Vol 56 (8) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Heat Treating ◽  
Lead Free ◽  
Superconducting Wire

Abstract Wieland-BC1 and BD3 alloys are lead-free bronzes that are suitable for the production of superconducting wire based on Nb3Sn. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: CU-750. Producer or source: Wieland Metals Inc.

ALLEGHENY LUDLUM AL276

Alloy Digest ◽  
1996 ◽  
Vol 45 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Power Plant ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Crevice Corrosion ◽  
Heat Treating ◽  
Chemical Plants ◽  
Temperature Performance

Abstract Allegheny Ludlum AL276 is widely used in the most severe environments found in chemical plants and in power plant desulfurization systems. The high molybdenum level with tungsten gives excellent pitting and crevice corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, joining, and surface treatment. Filing Code: Ni-497. Producer or source: Allegheny Ludlum Corporation.

PYROTOOL A

Alloy Digest ◽  
1971 ◽  
Vol 20 (4) ◽  
Keyword(s):  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
Good Ductility ◽  
Extrusion Dies ◽  
Temperature Performance

Abstract PYROTOOL A has been designed to display high strength and good ductility at temperatures up to 1200 F. It is used for high-temperature tooling, extrusion dies, liners, dummy blocks, forging dies, mandrels, holders, etc. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, joining, and surface treatment. Filing Code: Fe-47. Producer or source: Carpenter.

UNISPAN LR35

Alloy Digest ◽  
1971 ◽  
Vol 20 (1) ◽  
Keyword(s):  
Thermal Expansion ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Coefficient Of Thermal Expansion ◽  
Heat Treating ◽  
Temperature Performance ◽  
Operational Level

Abstract UNISPAN LR35 offers the lowest coefficient of thermal expansion of any alloy now available. It is a low residual modification of UNISPAN 36 for fully achieving the demanding operational level of precision equipment. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and surface treatment. Filing Code: Fe-46. Producer or source: Cyclops Corporation.

ALCOA 2024

Alloy Digest ◽  
1998 ◽  
Vol 47 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Surface Finish ◽  
High Strength ◽  
Machined Surface ◽  
2024 Alloy ◽  
Structural Applications ◽  
Strength Material

Abstract Alcoa 2024 alloy has good machinability and machined surface finish capability, and is a high-strength material of adequate workability. It has largely superseded alloy 2017 (see Alloy Digest Al-58, August 1974) for structural applications. The alloy has comparable strength to some mild steels. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as machining and surface treatment. Filing Code: AL-346. Producer or source: ALCOA Wire, Rod & Bar Division.

ALCOA 6061

Alloy Digest ◽  
2006 ◽  
Vol 55 (1) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Shear Strength ◽  
Physical Properties ◽  
Surface Treatment ◽  
Tensile Properties ◽  
Data Sheet ◽  
Alloy 6061

Abstract Alloy 6061 is one of the most widely used alloys in the 6000 Series. This data sheet revision adds standard tempers and many of the Alcoa special tempers, as well as properties for extrusions and shapes. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, machining, joining, and surface treatment. Filing Code: AL-281. Producer or source: Alcoa Engineered Products. Originally published May 1987, revised January 2006.

Sign in / Sign up

Export Citation Format

Share Document