Reactive Blending in a Twin Screw Extruder

1996 ◽  
Vol 11 (2) ◽  
pp. 139-146 ◽  
Author(s):  
A. De Loor ◽  
P. Cassagnau ◽  
A. Michel ◽  
L. Delamare ◽  
B. Vergnes
Keyword(s):  
Twin Screw Extruder ◽  
Reactive Blending ◽  
Screw Extruder ◽  
Twin Screw

A Study on Transreactions of PET/PEN Reactive Blending in a Twin-Screw Extruder Using an Axial Dispersion Model

2012 ◽  
Vol 21 (5) ◽  
pp. 340-349 ◽  
Author(s):  
Hossein Ali Khonakdar ◽  
Mahdi Golriz ◽  
Seyed Hassan Jafari ◽  
Hossein Abedini ◽  
Udo Wagenknecht ◽  
...  
Keyword(s):  
Dispersion Model ◽  
Axial Dispersion ◽  
Twin Screw Extruder ◽  
Reactive Blending ◽  
Screw Extruder ◽  
Axial Dispersion Model ◽  
Twin Screw

Unique Microstructure and Mechanical Properties from Melt Processing Poly(Lactide-co-Glycolide)/Poly(Trimethylene Carbonate)

2009 ◽  
Vol 1239 ◽  
Author(s):  
Jianbin Zhang ◽  
Lian Luo ◽  
Suping Lyu ◽  
Bryant Pudil ◽  
Jim Schley ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Extrusion Direction ◽  
Melt Processing ◽  
Water Soluble ◽  
Twin Screw Extruder ◽  
Trimethylene Carbonate ◽  
Reactive Blending ◽  
Screw Extruder ◽  
Twin Screw

AbstractPoly(lactide) (PLA) and its copolymers degrade through hydrolysis into non-toxic and water soluble metabolic products in vivo. They are ideal materials for resorbable biomedical applications such as drug delivery and tissue engineering. However, these polymers are brittle and often need to be toughened. One of the most effective toughening methods is reactive blending, in which additives are dispersed into polymer matrices as small particles with strong bonding between the two materials. In this paper, we studied toughening poly(lactide-co-glycolide) (PLGA) through reactive blending with poly(trimethylene carbonate) (PTMC). We observed warm-like micelle or swollen warm-like micelle structures created during the reactive blending process with a twin screw extruder at high temperature. The micelle structures were orientated along the extrusion direction with their length ranging from 50 to 1000 nm and diameters about 50 nm. This structure could be produced only with a twin screw extruder. When a batch mixer was used, the PTMC additive (10 to 30 wt%) formed spheres with diameters on the order of 100-500 nm. The PLGA/PTMC copolymers formed in situ were responsible to this microstructure. The mechanical properties of this blend were significantly improved over the pure PLGA.

SME-Arrhenius Model for WSI of Rice Flour in a Twin-Screw Extruder

2005 ◽  
Vol 82 (5) ◽  
pp. 574-581 ◽  
Author(s):  
Hanwu Lei ◽  
R. Gary Fulcher ◽  
Roger Ruan ◽  
Bernhard van Lengerich
Keyword(s):  
Rice Flour ◽  
Twin Screw Extruder ◽  
Screw Extruder ◽  
Arrhenius Model ◽  
Twin Screw

scholarly journals Effects of a Twin-Screw Extruder Equipped with a Molten Resin Reservoir on the Mechanical Properties and Microstructure of Recycled Waste Plastic Polyethylene Pellet Moldings

Polymers ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1058
Author(s):  
Hikaru Okubo ◽  
Haruka Kaneyasu ◽  
Tetsuya Kimura ◽  
Patchiya Phanthong ◽  
Shigeru Yao
Keyword(s):  
Mechanical Properties ◽  
Mechanical Performance ◽  
Value Added ◽  
Industrial Applications ◽  
Twin Screw Extruder ◽  
Screw Extruder ◽  
Polymer Properties ◽  
Wide Range ◽  
Twin Screw ◽  
Recycled Plastics

Each year, increasing amounts of plastic waste are generated, causing environmental pollution and resource loss. Recycling is a solution, but recycled plastics often have inferior mechanical properties to virgin plastics. However, studies have shown that holding polymers in the melt state before extrusion can restore the mechanical properties; thus, we propose a twin-screw extruder with a molten resin reservoir (MSR), a cavity between the screw zone and twin-screw extruder discharge, which retains molten polymer after mixing in the twin-screw zone, thus influencing the polymer properties. Re-extruded recycled polyethylene (RPE) pellets were produced, and the tensile properties and microstructure of virgin polyethylene (PE), unextruded RPE, and re-extruded RPE moldings prepared with and without the MSR were evaluated. Crucially, the elongation at break of the MSR-extruded RPE molding was seven times higher than that of the original RPE molding, and the Young’s modulus of the MSR-extruded RPE molding was comparable to that of the virgin PE molding. Both the MSR-extruded RPE and virgin PE moldings contained similar striped lamellae. Thus, MSR re-extrusion improved the mechanical performance of recycled polymers by optimizing the microstructure. The use of MSRs will facilitate the reuse of waste plastics as value-added materials having a wide range of industrial applications.

Sign in / Sign up

Export Citation Format

Share Document