scholarly journals Depositional environment, stratigraphy, and vertical hydraulic conductivity of the St Francois confining unit in the Fristoe Unit of the Mark Twain National Forest, Missouri

2000 ◽  
Keyword(s):  
Hydraulic Conductivity ◽  
Depositional Environment ◽  
Mark Twain ◽  
National Forest ◽  
Vertical Hydraulic Conductivity ◽  
Confining Unit

Saturated Hydraulic Conductivity of Clayey Tills and the Role of Fractures

1990 ◽  
Vol 21 (2) ◽  
pp. 119-132 ◽  
Author(s):  
Johnny Fredericia
Keyword(s):  
Hydraulic Conductivity ◽  
American Studies ◽  
Field Measurements ◽  
Present Knowledge ◽  
Saturated Hydraulic Conductivity ◽  
Field Observations ◽  
Laboratory Measurements ◽  
Vertical Hydraulic Conductivity ◽  
Data Field

The background for the present knowledge about hydraulic conductivity of clayey till in Denmark is summarized. The data show a difference of 1-2 orders of magnitude in the vertical hydraulic conductivity between values from laboratory measurements and field measurements. This difference is discussed and based on new data, field observations and comparison with North American studies, it is concluded to be primarily due to fractures in the till.

Effect of temperature on streambed vertical hydraulic conductivity

2013 ◽  
Vol 45 (1) ◽  
pp. 89-98 ◽  
Author(s):  
Weihong Dong ◽  
Gengxin Ou ◽  
Xunhong Chen ◽  
Zhaowei Wang
Keyword(s):  
Hydraulic Conductivity ◽  
Water Temperature ◽  
Sediment Cores ◽  
Effect Of Temperature ◽  
In Situ Tests ◽  
Effect Of Water ◽  
Vertical Hydraulic Conductivity ◽  
Increasing Trend ◽  
Streambed Vertical Hydraulic Conductivity

In this study, in situ and on-site permeameter tests were conducted in Clear Creek, Nebraska, USA to evaluate the effect of water temperature on streambed vertical hydraulic conductivity Kv. Fifty-two sediment cores were tested. Five of them were transferred to the laboratory for a series of experiments to evaluate the effect of water temperature on Kv. Compared with in situ tests, 42 out of the 52 tests have higher Kv values for on-site tests. The distribution of water temperature at the approximately 50 cm depth of streambed along the sand bar was investigated in the field. These temperatures had values in the range 14–19 °C with an average of 16 °C and had an increasing trend along the stream flow. On average, Kv values of the streambed sediments in the laboratory tests increase by 1.8% per 1 °C increase in water temperature. The coarser sandy sediments show a greater increase extent of the Kv value per 1 °C increase in water temperature. However, there is no distinct increasing trend of Kv value for sediment containing silt and clay layers.

scholarly journals New insights into the drainage of inundated ice-wedge polygons using fundamental hydrologic principles

2021 ◽  
Author(s):  
Dylan R. Harp ◽  
Vitaly Zlotnik ◽  
Charles J. Abolt ◽  
Brent D. Newman ◽  
Adam L. Atchley ◽  
...  
Keyword(s):  
Hydraulic Conductivity ◽  
Aspect Ratio ◽  
Annular Region ◽  
Active Layer Thickness ◽  
Conductivity Anisotropy ◽  
Aspect Ratios ◽  
High Anisotropy ◽  
Vertical Hydraulic Conductivity ◽  
Depth Analysis ◽  
Ice Wedge

Abstract. The pathways and timing of drainage from inundated ice-wedge polygon centers in a warming climate have important implications for carbon flushing, advective heat transport, and transitions from carbon dioxide to methane dominated emissions. This research provides intuition on this process by presenting the first in-depth analysis of drainage from a single polygon based on fundamental hydrogeological principles. We use a recently developed analytical solution to provide a baseline for the effects of polygon aspect ratios (radius to thawed depth) and hydraulic conductivity anisotropy (horizontal to vertical hydraulic conductivity) on drainage pathways and temporal depletion of ponded water heights of inundated ice-wedge polygon centers. By varying the polygon aspect ratio, we evaluate the effect of polygon size (width), inter-annual increases in active layer thickness, and seasonal increases in thaw depth on drainage. One of the primary insights from the model is that most inundated ice-wedge polygon drainage occurs along an annular region of the polygon center near the rims. This implies that inundated polygons are most intensely flushed by drainage in an annular region along their horizontal periphery, with implications for transport of nutrients (such as dissolved organic carbon) and advection of heat towards ice wedge tops. The model indicates that polygons with large aspect ratios and high anisotropy will have the most distributed drainage. Polygons with large aspect ratio and low anisotropy will have their drainage most focused near the their periphery and will drain most slowly. Polygons with small aspect ratio and high anisotropy will drain most quickly. Our results, based on idealized scenarios, provide a baseline for further research considering geometric and hydraulic complexities of ice-wedge polygons.

scholarly journals The Effect of River Valleys and the Upper Cretaceous Aquitard on Regional Flow in the Dakota Aquifer in the Central Great Plains of Kansas and Southeastern Colorado

1995 ◽  
pp. 11-30
Author(s):  
P. Allen Macfarlane
Keyword(s):  
Hydraulic Conductivity ◽  
Great Plains ◽  
Upper Cretaceous ◽  
Flow System ◽  
Arkansas River ◽  
Local Flow ◽  
Discharge Area ◽  
Regional Flow ◽  
Regional Hydrogeology ◽  
Vertical Hydraulic Conductivity

In his reports on the regional hydrogeology of the central Great Plains, in particular southeastern Colorado and southwestern and central Kansas, Darton considered the Dakota aquifer to be a classic example of an artesian system. Computer simulations of the flow system in this study, however, suggest that the Dakota is not a regional artesian aquifer in the classic sense. Sensitivity analysis of a steady-state vertical profile flow model demonstrates that the flow system in the upper Dakota in western Kansas is heavily influenced by the Upper Cretaceous aquitard, the Arkansas River in southeastern Colorado, and rivers in central Kansas, such as the Saline, that have eroded through the aquitard and into the Dakota to the west of the main outcrop area of the aquifer. The model shows that local flow systems and the vertical hydraulic conductivity of the Upper Cretaceous aquitard heavily influence the water budget and the flow patterns. The aquitard restricts recharge from the overlying water table to underlying aquifers in western Kansas because of its considerable thickness and low vertical hydraulic conductivity. The Arkansas River intercepts ground-water flow moving toward western Kansas from recharge areas south of the river and further isolates the upper Dakota from sources of freshwater recharge. In central Kansas, the Saline River has reduced the distance between confined portions of the aquifer and its discharge area. In essence, this has improved the hydraulic connection between the confined aquifer and its discharge area, thus helping to generate subhydrostatic conditions in the upper Dakota upgradient of the river.

Simultaneous identification of contaminant source location, initial contaminant concentration, horizontal and vertical hydraulic conductivity in a three-dimensional coastal aquifer via ensemble Kalman filter 

2021 ◽  
Author(s):  
Arezou Dodangeh ◽  
Mohammad Mahdi Rajabi ◽  
Marwan Fahs
Keyword(s):  
Kalman Filter ◽  
Hydraulic Conductivity ◽  
Coastal Aquifers ◽  
Ensemble Kalman Filter ◽  
Coastal Aquifer ◽  
Three Dimensional ◽  
Source Location ◽  
Contaminant Concentration ◽  
Contaminant Source ◽  
Vertical Hydraulic Conductivity

<p>In coastal aquifers, we face the problem of salt water intrusion, which creates a complex flow field. Many of these coastal aquifers are also exposed to contaminants from various sources. In addition, in many cases there is no information about the characteristics of the aquifer. Simultaneous identification of the contaminant source and coastal aquifer characteristics can be a challenging issue. Much work has been done to identify the contaminant source, but in the complex velocity field of coastal aquifer, no one has resolved this issue yet. We want to address that in a three-dimensional artificial coastal aquifer.</p><p>To achieve this goal, we have developed a method in which the contaminant source can be identified and the characteristics of the aquifer can be estimated by using information obtained from observation wells. First, by assuming the input parameters required to simulate the contaminant transfer to the aquifer, this three-dimensional coastal aquifer that is affected by various phenomena such as seawater intrusion, tides, shore slope, rain, discharge and injection wells, is simulated and the time series of the output parameters including head, salinity and contaminant concentration are estimated. In the next step, with the aim of performing inverse modeling, random values ​​are added to the time series of outputs obtained at specific points (points belonging to observation wells) in order to rebuilt the initial conditions of the problem to achieve the desired unknowns (contaminant source and aquifer characteristics). The unknowns estimated in this study are the contaminant source location (x, y, z), the initial contaminant concentration, the horizontal and vertical hydraulic conductivity of the aquifer. SEAWAT model in GMS software environment has been used to solve the equations of flow and contaminant transfer and simulate a three-dimensional coastal aquifer. Next, for reverse modeling, one of the Bayesian Filters subset (ensemble Kalman filter) has been used in the Python programming language environment. Also, to reduce the code run time, the neural network model is designed and trained for the SEAWAT model.</p><p>This method is able to meet the main purpose of the study, namely estimating the value ​​of unknown input parameters, including the contaminant source location, the initial contaminant concentration, the horizontal and vertical hydraulic conductivity of the aquifer. In addition, that makes it possible to achieve a three-dimensional numerical model of the coastal aquifer that can be used as a benchmark to examine more accurately the impact of different phenomena simultaneously. In conclusion, we have developed an algorithm which can be used in the world's coastal aquifers to identify the contaminant source and estimate its characteristics.</p><p> </p><p>Key words: coastal aquifer, seawater intrusion, contaminants, groundwater, flow field, parameter estimation, ensemble kalman filter</p>

Using Landsat images to detect oak decline in the Mark Twain National Forest, Ozark Highlands

2007 ◽  
Vol 240 (1-3) ◽  
pp. 70-78 ◽  
Author(s):  
Cuizhen Wang ◽  
Zhenqian Lu ◽  
Timothy L. Haithcoat
Keyword(s):  
Mark Twain ◽  
National Forest ◽  
Oak Decline ◽  
Landsat Images ◽  
Ozark Highlands
Sign in / Sign up

Export Citation Format

Share Document