scholarly journals Air Leakage Characteristics and Leakage Distribution of Dwellings in High-rise Residential Buildings in Korea

2013 ◽  
Vol 12 (1) ◽  
pp. 87-92 ◽  
Author(s):  
Hyun Kook Shin ◽  
Jae Hun Jo
Keyword(s):  
Residential Buildings ◽  
Air Leakage ◽  
High Rise ◽  
Leakage Characteristics

Assessing the effect of night ventilation on PCM performance in high-rise residential buildings

2019 ◽  
Vol 43 (3) ◽  
pp. 229-249 ◽  
Author(s):  
Shahrzad Soudian ◽  
Umberto Berardi
Keyword(s):  
Thermal Energy ◽  
Phase Change Materials ◽  
Positive Impact ◽  
Residential Buildings ◽  
Solidification Rate ◽  
Operative Temperature ◽  
High Rise ◽  
Ventilation Strategies ◽  
Night Ventilation ◽  
The Impact

This article investigates the possibility to enhance the use of latent heat thermal energy storage (LHTES) as an energy retrofit measure by night ventilation strategies. For this scope, phase change materials (PCMs) are integrated into wall and ceiling surfaces of high-rise residential buildings with highly glazed facades that experience high indoor diurnal temperatures. In particular, this article investigates the effect of night ventilation on the performance of the PCMs, namely, the daily discharge of the thermal energy stored by PCMs. Following previous experimental tests that have shown the efficacy of LHTES in temperate climates, a system comprising two PCM layers with melting temperatures selected for a year-around LHTES was considered. To quantify the effectiveness of different night ventilation strategies to enhance the potential of this composite PCM system, simulations in EnergyPlusTM were performed. The ventilation flow rate, set point temperature, and operation period were the main tested parameters. The performance of the PCMs in relation to the variables was evaluated based on indoor operative temperature and cooling energy use variations in Toronto and New York in the summer. The solidification of the PCMs was analyzed based on the amount of night ventilation needed in each climate condition. The results quantify the positive impact of combining PCMs with night ventilation on cooling energy reductions and operative temperature regulation of the following days. In particular, the results indicate higher benefits obtainable with PCMs coupled with night ventilation in the context of Toronto, since this city experiences higher daily temperature fluctuations. The impact of night ventilation design variables on the solidification rate of the PCMs varied based on each parameter leading to different compromises based on the PCM and climate characteristics.

scholarly journals Sensitivity and Uncertainty Analyses of Human and Organizational Risks in Fire Safety Systems for High-Rise Residential Buildings with Probabilistic T-H-O-Risk Methodology

2021 ◽  
Vol 11 (6) ◽  
pp. 2590
Author(s):  
Samson Tan ◽  
Darryl Weinert ◽  
Paul Joseph ◽  
Khalid Moinuddin
Keyword(s):  
Fire Safety ◽  
Residential Buildings ◽  
Fire Risk ◽  
Regulatory Regime ◽  
High Rise ◽  
Fire Engineering ◽  
Verification Methods ◽  
Uncertainty Analyses ◽  
Risk Methodology ◽  
Probabilistic Risk

Given that existing fire risk models often ignore human and organizational errors (HOEs) ultimately leading to underestimation of risks by as much as 80%, this study employs a technical-human-organizational risk (T-H-O-Risk) methodology to address knowledge gaps in current state-of-the-art probabilistic risk analysis (PRA) for high-rise residential buildings with the following goals: (1) Develop an improved PRA methodology to address concerns that deterministic, fire engineering approaches significantly underestimate safety levels that lead to inaccurate fire safety levels. (2) Enhance existing fire safety verification methods by incorporating probabilistic risk approach and HOEs for (i) a more inclusive view of risk, and (ii) to overcome the deterministic nature of current verification methods. (3) Perform comprehensive sensitivity and uncertainty analyses to address uncertainties in numerical estimates used in fault tree/event trees, Bayesian network and system dynamics and their propagation in a probabilistic model. (4) Quantification of human and organizational risks for high-rise residential buildings which contributes towards a policy agenda in the direction of a sustainable, risk-based regulatory regime. This research contributes to the development of the next-generation building codes and risk assessment methodologies.

Experimental assessment of the shear strength of an asymmetric steel composite beam with web openings

2005 ◽  
Vol 32 (2) ◽  
pp. 314-328 ◽  
Author(s):  
Young K Ju ◽  
Do-Hyun Kim ◽  
Sang-Dae Kim
Keyword(s):  
Shear Strength ◽  
Composite Beam ◽  
Residential Buildings ◽  
Shear Capacity ◽  
Structural System ◽  
Web Openings ◽  
Wide Beam ◽  
High Rise ◽  
Beam Shear ◽  
Steel Composite

The number of high-rise buildings has greatly increased in Korea, and storey height is a significant component of tall residential buildings due to the limited city area. To reduce storey height, the wide beam has been adopted in some projects in Seoul such as Trump World, Galleria Palace, and Richencia. The joints between the wide beam and the core wall were too narrow to place the reinforcement, however. This paper investigates a newly developed structural system called the innovative, technical, economical, and convenient hybrid system (iTECH system). The iTECH system has an asymmetric steel assembly with web openings, where the top plate is welded on top of inverted structural "tees" whose cut is referred to as a "honeycomb" type. Both sides of the web and the slab are filled with cast-in-place concrete. The shear capacity was experimentally evaluated and verified, with parameters determined by factors that shared the shear strength of the iTECH beam. The steel web, inner concrete panel, and outer concrete panel contributed to the shear strength of the iTECH beam. The shear stirrup did not contribute much to the shear strength, however, and therefore a design equation using the steel web and inner concrete panel was suggested.Key words: composite beam, shear capacity, monotonic test, high-rise building.

A Study on Sun Shading Reconstruction Design of Residential Buildings in Chongqing City

2014 ◽  
Vol 953-954 ◽  
pp. 1481-1487
Author(s):  
Liu Jin
Keyword(s):  
Energy Saving ◽  
Personal Experience ◽  
Design Pattern ◽  
Simulation Analysis ◽  
Residential Buildings ◽  
Residential Building ◽  
Specific Time ◽  
High Rise ◽  
Time Period ◽  
Chongqing City

Windows energy saving design of residential buildings has increasingly got the attention of people. Through a large number of surveys and analysis of residential buildings in Chongqing and consumers personal experience, the author finds problems and deficiency, and then proposes principles of residential buildings sun shading reconstruction in Chongqing city. Taking the high-rise residential building of one university in Chongqing as reconstruction sample, selecting a specific time period, the author recalculates sun shading coefficient with and without sun shading by using Ecotect software to do simulation analysis. Finally, the reasonable reconstruction design pattern is put forward through cases. Keywords: Buildings Sun Shading, Sun Shading Reconstruction, Energy Saving

Sign in / Sign up

Export Citation Format

Share Document