scholarly journals EXPERIMENTAL STUDY ON COMPRESSIVE STRENGTH OF POROUS CONCRETE WITH RECYCLED AGGREGATES

2003 ◽  
Vol 68 (570) ◽  
pp. 31-36 ◽  
Author(s):  
Shigemitsu HATANAKA ◽  
Yukihisa YUASA ◽  
Naoki MISHIMA
Keyword(s):  
Experimental Study ◽  
Compressive Strength ◽  
Recycled Aggregates ◽  
Porous Concrete

Experimental Study on Compressive Strength of Recycled Aggregate Concrete with Different Replacement Ratios

2012 ◽  
Vol 174-177 ◽  
pp. 1277-1280 ◽  
Author(s):  
Hai Yong Cai ◽  
Min Zhang ◽  
Ling Bo Dang
Keyword(s):  
Experimental Study ◽  
Compressive Strength ◽  
Failure Mode ◽  
Failure Process ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Replacement Ratio ◽  
Aggregate Concrete

Compressive strengths of recycled aggregate concrete(RAC) with different recycled aggregates(RA) replacement ratios at 7d, 28d, 60d ages are investigated respectively. Failure process and failure mode of RAC are analyzed, influences on compressive strength with same mix ratio and different RA replacement ratios are analyzed, and the reason is investigated in this paper. The experimental results indicate that compressive strength of recycled concrete at 28d age can reach the standard generally, it is feasible to mix concrete with recycled aggregates, compressive strength with 50% replacement ratio is relatively high.

scholarly journals EXPERIMENTAL STUDY ON DISTRIBUTION OF COMPRESSIVE STRENGTH OF POROUS CONCRETE

2006 ◽  
Vol 71 (601) ◽  
pp. 9-14
Author(s):  
Takamasa YAMAMOTO ◽  
Shigemitsu HATANAKA ◽  
Naoki MISHIMA ◽  
Sachio KOIKE ◽  
Yukihisa YUASA
Keyword(s):  
Experimental Study ◽  
Compressive Strength ◽  
Porous Concrete

scholarly journals Penetration and Strength Analysis of Pervious Concrete

2021 ◽  
Vol 2070 (1) ◽  
pp. 012244
Author(s):  
Kuldeep Kumar ◽  
Manjeet Bansal ◽  
Rishav Garg ◽  
Rajni Garg
Keyword(s):  
Experimental Study ◽  
Compressive Strength ◽  
Portland Cement ◽  
Coarse Aggregate ◽  
Pervious Concrete ◽  
Strength Analysis ◽  
Porous Concrete ◽  
Fine Aggregates ◽  
Infiltration Tests ◽  
Curing Age

Abstract Porous concrete is an amalgamation of coarse aggregate, Portland cement, and water, which permits rainfall water to permeate through the surface and into the ground before it runs off. Porous concrete encompasses little or no fine aggregates and adequate cementitious fixative to coat the coarse aggregate while keeping the voids interconnected. IRC 44-2017 states that range of permeability for pervious concrete should be from 0.135 cm/second to 1.22 cm/second and array of compressive strength should be 5MPa - 25MPa. In this experimental study, two properties of no fine concrete namely compressive strength and porousness at the curing age of 7th & 28rd days has been targeted. Compressive strength and Infiltration tests were conducted on the pervious concrete of grade M10 and M15 by keeping variation of fine aggregates of 0% - 5%. We observed that fines aggregate help to rise the compressive strength of porous concrete but decrease the permeability. Thus, by careful optimization of the mix, pervious concrete can be obtained for suitable use in low strength load.

scholarly journals Experimental Study on Recycled Concrete Aggregates with Rice Husk Ash as Partial Cement Replacement

2018 ◽  
Vol 4 (10) ◽  
pp. 2305 ◽  
Author(s):  
Naraindas Bheel ◽  
Shanker Lal Meghwar ◽  
Samiullah Sohu ◽  
Ali Raza Khoso ◽  
Ashok Kumar ◽  
...  
Keyword(s):  
Experimental Study ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Rice Husk ◽  
Rice Husk Ash ◽  
Splitting Tensile Strength ◽  
Recycled Concrete ◽  
Recycled Aggregates ◽  
Concrete Aggregates ◽  
Coarse Aggregates

Concrete is highly utilized construction material around the globe and responsible for high depreciation of the raw materials. Consumption of this material in construction industry is arching upward day by day. On the other hand, debris of demolished concrete structures are being dumped as waste. For developing countries such waste is not a good sign and need its proper utilization by recycling it into useful product. In this consequence, this study is an attempt to utilize demolished waste concrete by converting into coarse aggregates. This research was conducted on recycled cement concrete aggregates of demolished structures and Rice Husk Ash (RHA). The purpose of this experimental study is to analyze the mechanical properties of concrete; when cement is partially replaced with RHA and natural aggregates by recycled aggregates (RA). In this study, the cement was replaced by RHA up to 10% by weight of cement. For experimental purpose, total 135 concrete specimens were prepared, cured and tested in Universal Testing Machine (UTM). Finally, laboratory results were compared in terms of compressive and splitting tensile strength made with normal and recycled coarse aggregates. All the specimens were prepared at 1:1.5:3 with 0.50 w/c ratio and tested at 7, 14, 21, 28 and 56 days curing ages. It is observed from experimental analysis that the workability of fresh normal concrete is 7% and 10% greater than recycled aggregates concrete blended with 10% RHA and only recycled aggregates concrete without RHA respectively. The compressive strength increases up to 6%, whilst splitting tensile strength increases 4% at 56 days curing, when the cement is replaced 10% by RHA. It is, further, concluded that with more than 10% RHA replacement with cement, the compressive strength decreases. This study would help the construction experts to use such wasted concrete into useable production of new concrete projects.

scholarly journals Predicting Compressive Strength of Concrete Containing Recycled Aggregate Using Modified ANN with Different Optimization Algorithms

2021 ◽  
Vol 11 (2) ◽  
pp. 485
Author(s):  
Amirreza Kandiri ◽  
Farid Sartipi ◽  
Mahdi Kioumarsi
Keyword(s):  
Compressive Strength ◽  
Optimization Algorithms ◽  
Recycled Aggregate ◽  
Recycled Aggregates ◽  
Tree Model ◽  
Grasshopper Optimization Algorithm ◽  
Compressive Strength Of Concrete ◽  
Grasshopper Optimization ◽  
Artificial Neural Network Ann ◽  
Industry Needs

Using recycled aggregate in concrete is one of the best ways to reduce construction pollution and prevent the exploitation of natural resources to provide the needed aggregate. However, recycled aggregates affect the mechanical properties of concrete, but the existing information on the subject is less than what the industry needs. Compressive strength, on the other hand, is the most important mechanical property of concrete. Therefore, having predictive models to provide the required information can be helpful to convince the industry to increase the use of recycled aggregate in concrete. In this research, three different optimization algorithms including genetic algorithm (GA), salp swarm algorithm (SSA), and grasshopper optimization algorithm (GOA) are employed to be hybridized with artificial neural network (ANN) separately to predict the compressive strength of concrete containing recycled aggregate, and a M5P tree model is used to test the efficiency of the ANNs. The results of this study show the superior efficiency of the modified ANN with SSA when compared to other models. However, the statistical indicators of the hybrid ANNs with SSA, GA, and GOA are so close to each other.

scholarly journals Experimental Study on Improvement of Marine Soft Soil with Alkali Residue

2018 ◽  
Vol 53 ◽  
pp. 04021
Author(s):  
SHAO Yong ◽  
LIU Xiao-li ◽  
ZHU Jin-jun
Keyword(s):  
Experimental Study ◽  
Compressive Strength ◽  
Unconfined Compressive Strength ◽  
Void Ratio ◽  
Soft Soil ◽  
Compressive Modulus ◽  
Engineering Properties ◽  
Test Results ◽  
Use Of Resources ◽  
One Year

Industrial alkali slag is the discharge waste in the process of alkali production. About one million tons of alkali slag is discharged in China in one year. It is a burden on the environment, whether it is directly stacked or discharged into the sea. If we can realize the use of resources, it is a multi-pronged move, so alkali slag is used to improve solidified marine soft soil in this paper. The test results show that the alkali residue can effectively improve the engineering properties of marine soft soil. Among them, the unconfined compressive strength and compressive modulus are increased by about 10 times, and the void ratio and plasticity index can all reach the level of general clay. It shows that alkali slag has the potential to improve marine soft soil and can be popularized in engineering.

Experimental Study on Utilization FGD Byproducts in Building Bricks

2010 ◽  
Vol 150-151 ◽  
pp. 753-757 ◽  
Author(s):  
Xiong Hao Li ◽  
Yong Jie Xue ◽  
Min Zhou
Keyword(s):  
Experimental Study ◽  
Compressive Strength ◽  
Optimum Design ◽  
Power Plants ◽  
Pilot Scale ◽  
Mixture Composition ◽  
Technical Requirement ◽  
Do No Harm ◽  
Maximum Compressive Strength ◽  
Scale Experiment

This paper discussed the feasibility of unburned and non-autoclaved, steam cured bricks prepared by FGD byproducts from coal-fired power plants. The results show that FGD byproduct, aggregates, cementious materials and water could be used to prepare bricks during the process of stir and compaction under natural cure and steam cured condition. S4 and Z2 are the optimum design mixture composition. The maximum compressive strength and saturation coefficient are 28.7 MPa and 96.7%. FGD byproducts do no harm to environment and a pilot-scale experiment demonstrates that bricks made with FGDA can meet the MU10 level bricks technical requirement.

Sign in / Sign up

Export Citation Format

Share Document