scholarly journals KAJIAN ANOMALI PEREKONOMIAN MAKRO KOTA MAGELANG

2020 ◽  
Vol 5 (2) ◽  
pp. 148-153
Author(s):  
Nur Maizunati ◽  
Keyword(s):  
Granger Causality ◽  
Unemployment Rate ◽  
Inflation Rate ◽  
Negative Relationship ◽  
Var Model ◽  
Vector Autoregressive ◽  
Economic Theories ◽  
Relationship Of ◽  
The Relationship

The economic dynamics in Magelang City, although quite impressive in the last five years, but have had anomalies in several years. The interrelated achievement of several macro indicators does not show synergy with various existing economic theories. This study examines the economic anomaly that occurred in Magelang City through the analysis of the relationship of several macro indicators with OLS regression and the Vector Autoregressive (VAR) model. The research results show that there is a negative relationship between the inflation variable and the unemployment rate on GDP. It was also found that GDP had significant granger causality over unemployment rate. Unemployment rate showed a negative response since the first period due to changes in the inflation rate. But in the 5th to the 10th years its fluctuations began to shrink. Meanwhile the GDP responded negatively to the dynamics of inflation with fluctuations that widened throughout the year. The determination of the cut-off point for inflation figures needs to be carefully formulated so that all related indicators can move dynamically but harmoniously.

Relationship of Organizational Citizenship Behavior and Production Deviance: Role of Perceived Organizational Politics

2019 ◽  
Vol 34 (2) ◽  
pp. 367-382
Author(s):  
Irsa Fatima Makhdoom ◽  
Mohsin Atta ◽  
Najma Iqbal Malik
Keyword(s):  
Organizational Citizenship ◽  
Organizational Citizenship Behavior ◽  
Negative Relationship ◽  
Civic Virtue ◽  
Organizational Politics ◽  
Work Behavior ◽  
Citizenship Behavior ◽  
Production Deviance ◽  
Relationship Of ◽  
The Relationship

The present study was an endeavor to extend the literature of perceived organizational politics by examining its moderating role between the relationship of organizational citizenship behavior and production deviance. Organizational Citizenship Behavior Scale (Mackenzie, Podsakoff, & Paine, 1999), Production Deviance sub-scale of Counterproductive Work Behavior Checklist-32 (Spector et al., 2006), and Perception of Organizational Politics Scale (Kacmar & Carlson, 1997) were used in present study. Hierarchical regression analyses revealed that low levels of perceived organizational politics moderated the relationship between courtesy and production deviance by strengthening the negative relationship of these behaviors while perceived organizational politics did not act as a moderator for the relationship of civic virtue and conscientiousness with production deviance. High level of go-along-to-get-ahead as a moderator strengthened the relationship of civic virtue and conscientiousness with production deviance and its low level was found to be moderating the relationship between courtesy and production deviance. Future implications of the study were also discussed.

Calculating the aerodynamics of vertical axis wind turbines

2012 ◽  
Vol 34 (3) ◽  
pp. 169-184 ◽  
Author(s):  
Hoang Thi Bich Ngoc
Keyword(s):  
Wind Turbine ◽  
Incidence Angle ◽  
Vertical Axis ◽  
Rotor Blades ◽  
Vertical Axis Wind Turbine ◽  
Horizontal Axis Wind Turbine ◽  
Velocity Triangle ◽  
Relationship Of ◽  
The Relationship

Vertical axis wind turbine technology has been applied last years, very long after horizontal axis wind turbine technology. Aerodynamic problems of vertical axis wind machines are discussible. An important problem is the determination of the incidence law in the interaction between wind and rotor blades. The focus of the work is to establish equations of the incidence depending on the blade azimuth, and to solve them. From these results, aerodynamic torques and power can be calculated. The incidence angle is a parameter of velocity triangle, and both the factors depend not only on the blade azimuth but also on the ratio of rotational speed and horizontal speed. The built computational program allows theoretically selecting the relationship of geometric parameters of wind turbine in accordance with requirements on power, wind speed and installation conditions.

Tire Treadwear — A Comprehensive Evaluation of the Factors: Generic Type, Aspect Ratio, Tread Pattern, and Tread Composition Part I: Introduction and Details on the Organization of the Program

1986 ◽  
Vol 14 (4) ◽  
pp. 201-218 ◽  
Author(s):  
A. G. Veith
Keyword(s):  
Aspect Ratio ◽  
Comprehensive Evaluation ◽  
Test Method ◽  
Interactive Effects ◽  
Data Analyses ◽  
Main Effect ◽  
Systematic Determination ◽  
Relationship Of ◽  
The Relationship

Abstract This four-part series of papers addresses the problem of systematic determination of the influence of several tire factors on tire treadwear. Both the main effect of each factor and some of their interactive effects are included. The program was also structured to evaluate the influence of some external-to-tire conditions on the relationship of tire factors to treadwear. Part I describes the experimental design used to evaluate the effects on treadwear of generic tire type, aspect ratio, tread pattern (groove or void level), type of pattern (straight rib or block), and tread compound. Construction procedures and precautions used to obtain a valid and functional test method are included. Two guiding principles to be used in the data analyses of Parts II and III are discussed. These are the fractional groove and void concept, to characterize tread pattern geometry, and a demonstration of the equivalence of wear rate for identical compounds on whole tread or multi-section tread tires.

Knowledge management implementation in Indian automobile ancillary industries

2016 ◽  
Vol 11 (3) ◽  
pp. 802-810 ◽  
Author(s):  
Nitin Yashwant Patil ◽  
Ravi M. Warkhedkar
Keyword(s):  
Knowledge Management ◽  
Industrial Area ◽  
Total Quality ◽  
Limited Data ◽  
Interpretive Structural Modeling ◽  
Content Type ◽  
Relationship Of ◽  
Power And Dependence ◽  
The Relationship

Purpose In the past decade, much has been written about knowledge management (KM) in the manufacturing; however, less attention has been paid to the Indian automobile ancillary industries located in Chinchwad, Pune. It is suitable to find out the relationship of the factors of the study. It helps in identifying the hierarchy of factors to be taken, and interlinking of production department with KM improves the productivity of the industries. Categorization of these principles based on their driving power (principles which hold other principles) and dependence (principles which are dependent on other principles) has also been examined for KM implementation to study the driving power and dependence power of these principles. This paper aims to determine the roadmap of KM implementation and categorize KM principles based on their driving power for manufacturing industries with the use of the interpretive structural modeling (ISM)-based model. The results indicate that the principles possessing higher driving power, such as KM, inventory control, quality control, productivity and scheduling and their interlinking. The major contribution of this research lies in the development of contextual relationship among various identified factors of KM and determination of their driving and dependence power through a single systemic framework. Design/methodology/approach In this paper, author find out the suitability ISM for Indian Automobile industries to find the relation among the variables. Findings ISM model has been developed for the hierarchy of the identified KM. As ISM model results a hypothetical hierarchy which needs a proper quantitative analysis to evaluate their percentage effectiveness in the hierarchy. Research limitations/implications It is applied to automobile industries with limited number of variables that will show the dependence variable and driving variables and their interrelations. It can be applied other fields to fine the relationship of variables. Practical implications The ISM may be used in supply chain management and total quality management to find interlinking between the variables. Originality/value The limited data collected from Pimpri Chinchwad industrial area of Pune from Maharashtra state (India).

Respiratory mechanics in mechanically ventilated patients with respiratory failure

1985 ◽  
Vol 58 (6) ◽  
pp. 1849-1858 ◽  
Author(s):  
A. Rossi ◽  
S. B. Gottfried ◽  
B. D. Higgs ◽  
L. Zocchi ◽  
A. Grassino ◽  
...  
Keyword(s):  
Time Constant ◽  
Inflation Rate ◽  
Respiratory Mechanics ◽  
Mechanically Ventilated ◽  
Mechanically Ventilated Patients ◽  
Airway Occlusion ◽  
The Relationship ◽  
Resistance Value ◽  
Ventilated Patients

In 11 mechanically ventilated patients, respiratory mechanics were measured 1) during constant flow inflation and 2) following end-inflation airway occlusion, as proposed in model analysis (J. Appl. Physiol. 58: 1840–1848, 1985. During the latter part of inflation, the relationship between driving pressure and lung volume change was linear, allowing determination of static respiratory elastance (Ers) and resistance (RT). The latter represents in each patient the maximum resistance value that can obtain with the prevailing time constant inhomogeneity. Following occlusion, Ers and RT were also obtained along with RT (min) which represents a minimum, i.e., resistance value that would obtain in the absence of time constant inhomogeneity. A discrepancy between inflation and occlusion Ers and RT was found only in the three patients without positive end-expiratory pressure, and could be attributed to recruitment of lung units during inflation. In all instances Ers and RT were higher than normal. RT(min) was lower in all patients than the corresponding values of RT, indicating that resistance was frequency dependent due to time constant inequalities. Changes in inflation rate did not affect Ers, while RT increased with increasing flow.

Еarly diagnosis of multiple sclerosis: experience with the use of class G oligoclonal immunoglobulin

2021 ◽  
Vol 26 (3) ◽  
pp. 34-39
Author(s):  
Z. A. Goncharova ◽  
Y. Y. Pogrebnova ◽  
N. M. Yarosh ◽  
S. M.M. Sehweil
Keyword(s):  
Multiple Sclerosis ◽  
Early Diagnosis ◽  
Literature Review ◽  
Demyelinating Disease ◽  
Mcdonald Criteria ◽  
Mri Features ◽  
Oligoclonal Igg ◽  
Relationship Of ◽  
The Relationship

The article presents the literature review and our experience in early diagnosis of multiple sclerosis based on the updated McDonald criteria of 2017. The study included 256 patients with clinic symptoms of probable idiopathic infl ammatory demyelinating disease, including rare and atypical forms of demyelination. As a result of the study the sensitivity and specifi city of the determination of oligoclonal immunoglobulin G in the population of Rostov-on-Don was described for the fi rst time, including dependence of the duration of the disease. The relationship of clinical and MRI features of the fi rst attack of the disease with the probability of determining oligoclonal IgG in the cerebrospinal fl uid is refl ected

The Risk Tolerance Measure in the 2016 Survey of Consumer Finances: New, But Is It Improved?

2021 ◽  
pp. JFCP-19-00022
Author(s):  
Kyoung Tae Kim ◽  
Sherman D. Hanna ◽  
Dongyue Ying
Keyword(s):  
Negative Relationship ◽  
Risk Tolerance ◽  
Stock Ownership ◽  
Survey Of Consumer Finances ◽  
Consumer Finances ◽  
Two Measures ◽  
Complex Patterns ◽  
Relationship Of ◽  
The Relationship ◽  
Different Levels

The Survey of Consumer Finances (SCF) has included a 4-level risk tolerance measure since 1983. In 2016, the SCF also included an 11-level risk tolerance measure. We compare the two measures, and develop suggestions for using the new measure. While the new measure is seemingly simpler than the old measure, we demonstrate that it does not have a monotonic relationship with owning stock assets, with a pattern similar to the relationship of the old measure to stock ownership. We also identify complex patterns of factors related to different levels of the new measure, for instance education has a negative relationship at one level but positive at another level. Those using the new measure should consider the complex patterns we demonstrate.

The impact of the ESA 2010 on statistics of the general government sector

2015 ◽  
Vol 60 (11) ◽  
pp. 1-15
Author(s):  
Olga Leszczyńska-Luberek
Keyword(s):  
The European Union ◽  
Government Sector ◽  
General Government ◽  
European System ◽  
Relationship Of ◽  
The Impact ◽  
Methodological Guidelines ◽  
The Relationship ◽  
Excessive Deficit Procedure

The author presents the importance of the new European System of National and Regional Accounts (ESA 2010) for statistics of the general government sector. She pays particular attention to the development of data for the excessive deficit procedure. The article explains the methodological changes made to the studies in this field parallel to the ESA 2010. It discusses, among others, issues related to defining the deficit and debt of the general government, as well as the determination of a new way registering transfer of liabilities of pension schemes. It also presents the impact of new methodological guidelines for the relationship of deficit and debt to GDP in the Member States of the European Union.

scholarly journals Autonomy and Attachment in Relationships with Parents in the Context of Students’ Real Self-Determination

2021 ◽  
Vol 12 (1) ◽  
pp. 113-125
Author(s):  
D.A. Krasilo ◽  
T.A. Krassilo ◽  
A.N. Zalipaeva
Keyword(s):  
Inverse Relationship ◽  
Self Determination ◽  
Education Environment ◽  
Cognitive Autonomy ◽  
Positive Correlations ◽  
Almost All ◽  
Relationship Of ◽  
Real Self ◽  
The Relationship

Objectives. Studying the relationship of autonomy and attachment in relationships with parents with real self-determination in students. Background. The growing world globalization, intercultural contradictions, confrontation within society seriously complicate the path of self-determination of modern youth. At the same time, due to technical progress and digitalization of the communication and education environment, there are significant transformations in the interaction of people in almost all spheres, including in the family. Therefore, the question of studying the most important aspects in the relationship of young people with their parents for real self-determination is especially acute. Study design. The work studied the indicators of real self-determination, attachment to parents and autonomy among students. The presence of a relationship between these parameters was established by calculating the Spearman correlation coefficient. Participants. 60 college students aged 18 to 21. Measurements. Methodology “Scale of adult attachment for close relationships”; autonomy questionnaire (authors O.A. Karabanova and N.N. Poskrebysheva); questionnaire “ORS” (author D.A. Krasilo). Results. An inverse relationship of indicators of real self-determination of students with the level of intimacy and the level of anxiety (scales of attachment to parents) was established. A direct relationship was revealed between the indicators of real self-determination and the level of autonomy. Conclusions. Proximity and anxiety (components of attachment) have a significant inverse relationship with the level of real self-determination in students. There are no significant connections between reliability (a component of attachment) and real self-determination in the sample under study. Emotional autonomy, cognitive autonomy, behavioral autonomy, and value autonomy have significant positive correlations with the level of real self-determination in students.

scholarly journals Green CSR Moderated by Public Visibility and Innovation Performance at Indonesia Companies

2020 ◽  
Vol 24 (1) ◽  
pp. 1
Author(s):  
Rahmat Hidayat, Farah Margaretha Leon
Keyword(s):  
Positive Relationship ◽  
Negative Relationship ◽  
Innovation Performance ◽  
Manufacturing Companies ◽  
Innovation Activities ◽  
And Performance ◽  
Relationship Of ◽  
The Relationship

This study aims to analyze the green CSR  of innovation performance  with firms approval variables  and public visibility   can support moderating the relationship of green CSR  and innovation. The research sample was 33 manufacturing companies. The results showed that the  green CSR has a positive and significant effect on innovation . Also, the company approval variable has been proven to moderate the direction of a positive relationship between green CSR and innovation . The results also prove that public visibility is proven to moderate the direction of the negative relationship between green CSR and performance. This study provide information that shows great concern for the environment; it will increase the company in making changes through innovation activities. Also, the higher the company's approval and public visibility, the company will get support from various stakeholders to run the firms. The level of company concern for CSR activities will be a misjudgment for investors.

Sign in / Sign up

Export Citation Format

Share Document