scholarly journals Biosorption of methylene blue from aqueous solutions by modified mesoporous Simarouba glauca seed shell powder

2015 ◽  
Vol 17 (4) ◽  
pp. 701-715 ◽  
Keyword(s):  
Methylene Blue ◽  
Aqueous Solutions ◽  
Kinetic Data ◽  
Second Order ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Experimental Conditions ◽  
Pseudo Second Order ◽  
Simarouba Glauca ◽  
Shell Powder

<div> <p>The present study investigates the ability of formaldehyde treated <em>Simarouba glauca</em> seed shell powder for removal of methylene blue (MB) from aqueous solutions. Batch adsorption studies were carried out under various experimental conditions such as agitation time, dye concentration, adsorbent dose and pH. The adsorbent was characterized by Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), XRD, BET and CHNS analysis. The adsorption data were analysed using Langmuir, Freundlich, Temkin and Dubinin - Radushkevich isotherms. Equilibrium data fitted well to Langmuir isotherm with maximum adsorption capacity of 111.1 mg g <sup>-1</sup>. Adsorption kinetic data were verified using pseudo first order, pseudo second order and Intraparticle diffusion model. The kinetic data were found to fit well with pseudo second order model.</p> </div> <p>&nbsp;</p>

scholarly journals CHARACTERIZATION AND POTENTIAL SUITABILITY OF SIMAROUBA GLAUCA SEED SHELL LIGNOCELLULOSIC BIOMASS AS ADSORBENT OF BASIC DYES FROM AQUEOUS SOLUTIONS

2021 ◽  
Vol 55 (5-6) ◽  
pp. 705-722
Author(s):  
JEYAGOWRI BALAKRISHNAN ◽  
YAMUNA RANGAIYA THIAGARAJAN
Keyword(s):  
Aqueous Solutions ◽  
Cost Effective ◽  
Second Order ◽  
Cationic Dyes ◽  
X Ray Diffraction ◽  
Experimental Conditions ◽  
Batch Mode ◽  
Pseudo Second Order ◽  
Simarouba Glauca ◽  
Shell Powder

The present study investigates the potential of Simarouba glauca seed shell powder as a cost-effective adsorbent for the removal of the cationic dyes Malachite green (MG), Methylene blue (MB) and Rhodamine B (RB) from aqueous solutions. The adsorbent was characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and X-ray diffraction (XRD), as well as by Brunauer–Emmett–Teller (BET) and elemental (CHNS) analyses. Batch mode adsorption studies were carried out varying the experimental conditions, such as initial dye concentration and contact time, adsorbent dose, pH and particle size, in order to assess the adsorbent capacity for the removal of cationic dyes from wastewater. The experimental data were analysed using the Langmuir, Freundlich, Temkin and Dubinin–Radushkevich isotherms. The data fitted well the Langmuir model for the dyes studied. Kinetic data were analysed using the pseudo-first order, pseudo-second order, intraparticle diffusion and Boyd models. The experimental results showed that the pseudo-second order model fitted well.

scholarly journals Uptake of phenol from aqueous solution by burned water hyacinth

2008 ◽  
Vol 10 (2) ◽  
pp. 43-49 ◽  
Author(s):  
Mohammed Uddin ◽  
Mohammed Islam ◽  
Mohammed Islam ◽  
Mohammed Abedin
Keyword(s):  
Aqueous Solution ◽  
Water Hyacinth ◽  
Second Order ◽  
Point Of Zero Charge ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Experimental Conditions ◽  
Adsorption Models ◽  
Adsorption Sites ◽  
Pseudo Second Order

Uptake of phenol from aqueous solution by burned water hyacinth The potential of burned water hyacinth (BWH) for phenol adsorption from aqueous solution was studied. Batch kinetic and isotherm studies were carried out under varying experimental conditions of contact time, phenol concentration, adsorbent dosage and pH. The pH at the point of zero charge (pHPZC) of the adsorbent was determined by the titration method and the value of 8.8 ± 0.2 was obtained. The FTIR of the adsorbent was carried out in order to find the potential adsorption sites for the interaction with phenol molecules. The Freundlich and Langmuir adsorption models were used for the mathematical description of adsorption equilibrium and it was found that the experimental data fitted very well to the Langmuir model. Maximum adsorption capacity of the adsorbent was found to be 30.49 mg/g. Batch adsorption models, based on the assumption of the pseudo-first-order and pseudo-second-order models, were applied to examine the kinetics of the adsorption. The results showed that kinetic data closely followed the pseudo-second-order model.

scholarly journals Equilibrium, Kinetic and Thermodynamic Studies of Biosorption of Methylene Blue on Goethite Modified Baobab Fruit Pod (Adansonia Digitata L.)

2020 ◽  
Vol 24 (7) ◽  
pp. 1229-1243
Author(s):  
A.H. Alabi ◽  
E.O. Oladele ◽  
A.J.O. Adeleke ◽  
F.C. Oni ◽  
C.A. Olanrewaju
Keyword(s):  
Methylene Blue ◽  
Kinetic Data ◽  
Second Order ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Adansonia Digitata ◽  
Adsorption Data ◽  
Freundlich Adsorption Isotherm ◽  
Intra Particle Diffusion ◽  
Pseudo Second Order

Methylene Blue (MB) was adsorbed from aqueous solution using Baobab (Adansonia digitata L.) fruit pod and its goethite modified form. Adsorbents were characterized using Fourier Transform-Infra Red (FTIR) spectroscopy and Scanning Electron Microscopy (SEM). Batch experiments were conducted at room temperature (26.8 °C) and the adsorption data were fitted using Langmuir, Freundlich, Temkin and Dubinin- Radushkevich isotherms. Also, kinetic data was fitted using Pseudo-first order, pseudo-second order, Elovich and intra-particle diffusion models. Goethite modified baobab (GMB) appeared to have a coarse microporous surface with smoother surface and larger pore volumes compared to unmodified baobab (UB). The –C=O band was observed at 1631 and 1636 cm-1 for UB and GMB. The –OH band was observed at 3447.00 cm-1 and 3442 cm-1 for UB andGMB respectively. Langmuir model was suitable for describing the adsorption data of UB with R2 of 0.9293 while Temkin model was best for fitting adsorption data of MB on GMB with R2 of 0.9691. However, maximum adsorption capacity was obtained with Freundlich adsorption isotherm (15.4253 and 43.1301 mg/g for UB and GMB respectively). The maximum biosorption were 8.98 mg/g and 9.86 mg/g for UB and GMB respectively at pH 10. Pseudo-second-order kinetic model best fitted the kinetic data with R2 values of 0.9968 and 0.9993 for UB and GMB, ΔHo values were 83.123 KJ/mol and 361.094 KJ/mol for UB and GMB, while ΔSo values were 3.084 J/mol/ K and 1.765 J/mol/K for UB and GMB respectively. GMB adsorbed more of MB than UB and the process was endothermic. Keywords: Biosorption, Goethite, Baobab, Isotherms, Methylene blue.

scholarly journals Equilibrium and Kinetic Study on the Biosorption of Trypan Blue from Aqueous Solutions using Avocado Seed Powder

2020 ◽  
Vol 11 (3) ◽  
pp. 11042-11053
Keyword(s):  
Aqueous Solutions ◽  
Trypan Blue ◽  
Second Order ◽  
Blue Dye ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Experimental Conditions ◽  
Study Results ◽  
Pseudo Second Order ◽  
Avocado Seed

This research aims to investigate the removal of trypan blue dye from aqueous solutions by employing ground avocado seeds powder, a low-cost biowaste adsorbent (biosorbent), under various experimental conditions. The effect of contact time, initial dye concentration, and adsorbent dose on dye removal were studied. The experimental kinetic data were fitted to pseudo-first-order and pseudo-second-order kinetic models. Results imply that adsorption of trypan blue on the avocado seed adsorbent nicely followed the pseudo-second-order kinetic model. Equilibrium isotherms were analyzed by Langmuir and Freundlich isotherms, where Langmuir isotherm described the isotherm data with a high-correlation coefficient (R2=0.9948) closer to unity, and maximum adsorption capacity was found to be 19.3 mg g−1. The present study results substantiate that ground avocado seeds are a promising adsorbent for the removal of the dye trypan blue from industrial wastewater.

scholarly journals Removal of Methylene Blue Dye From Aqueous Solution Using PDADMAC Modified ZSM-5 Zeolite as a Novel Adsorbent 

2021 ◽  
Author(s):  
Sabarish Radoor ◽  
Jasila Karayil ◽  
Aswathy Jayakumar ◽  
Jyotishkumar Parameswaranpillai ◽  
Suchart Siengchin
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Contact Time ◽  
Adsorption Process ◽  
Nitrogen Adsorption ◽  
Second Order ◽  
Blue Dye ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Pseudo Second Order

Abstract In the present work, we modified ZSM-5 zeolite using a bio polymer poly (diallyl dimethyl ammonium chloride) and employed it for the removal of cationic dye, methylene blue from aqueous solution. The chemical and physical properties of the modified ZSM-5 zeolite were investigated using XRD, FTIR, SEM, TEM, nitrogen adsorption, TGA and 27Al NMR. Modified ZSM-5 zeolite possesses high surface area and pore diameter which was confirmed from SEM, TEM and nitrogen adsorption analysis. Adsorption of methylene blue on zeolite was investigated by batch adsorption technique. The effect of different parameters such as zeolite dosage, initial methylene blue concentration, temperature, pH and contact time on the adsorption process was discussed. Maximum adsorption capacity (4.31 mg/g) was achieved using 0.1g of modified ZSM-5 zeolite at the optimum conditions (initial dye concentration: 10 mg/L, pH: 10, temperature:30oC and contact time: 300 min). The experimental data were fitted into Langmuir and Freundlich models and the results indicate that the adsorption process followed Freundlich isotherm. Kinetic data were investigated using pseudo-first-order and pseudo-second-order models. Kinetic analysis indicates that pseudo-second-order model is more suitable to describe adsorption of MB on modified ZSM-5 zeolite. The reusability test suggests that the adsorbent could be reused at least six times without significant loss in removal efficiency.

scholarly journals Adsorption behaviors of methylene blue on sunflower stem pith

2019 ◽  
Vol 79 (8) ◽  
pp. 1458-1466
Author(s):  
Xiangyao Liu ◽  
Baohui Wang ◽  
Guolin Jing ◽  
Ya'nan Sun
Keyword(s):  
Methylene Blue ◽  
Langmuir Isotherm ◽  
Entropy Change ◽  
Second Order ◽  
Isotherm Model ◽  
Maximum Adsorption Capacity ◽  
Standard Entropy ◽  
Experimental Conditions ◽  
Adsorption Behaviors ◽  
Pseudo Second Order

Abstract Adsorption behaviors of methylene blue (MB) from aqueous solution using sunflower stem pith (SSP) as adsorbent were investigated. The effects of adsorption conditions such as adsorption time, initial concentration of MB and dosage of SSP on the detoxification of MB were examined. The equilibrium adsorption data were analyzed using three well-known isotherms: Langmuir, Freundlich and Temkin. The results indicated that the Langmuir isotherm fitted well to the data as compared with another isotherm model. The maximum adsorption capacity calculated by the Langmuir isotherm model was 277 mg/g at 338 K. Kinetic analyses were conducted using pseudo first order, pseudo second order and the Elovich model. The regression results showed that the MB adsorption was described by the pseudo second order model. Different thermodynamic parameters such as Gibb's free energy (ΔGo), standard enthalpy change (ΔHo) and standard entropy change (ΔSo) were also evaluated. The results showed that the detoxification of MB using SSP as adsorbent was feasible, non-spontaneous and exothermic under experimental conditions.

scholarly journals Novel Adsorbent for Industrial Wastewater Treatment Applications

2019 ◽  
Vol 9 (1) ◽  
pp. 1219-1225
Keyword(s):  
Methylene Blue ◽  
Second Order ◽  
Thymol Blue ◽  
Batch Adsorption ◽  
Particle Diffusion ◽  
Maximum Adsorption Capacity ◽  
Basic Solution ◽  
Order Kinetic ◽  
Intra Particle Diffusion ◽  
Pseudo Second Order

In this study, the hydroxyapatite powder is investigated for both of methylene blue and thymol blue in aqueous solution. The physical and chemical properties of the adsorbent were evaluated systematically using the different techniques including Microsoft Excel programming, linear regression model and also the coefficient of determination. Batch adsorption experiments were conducted to determine the effect of contact time, solution pH, initial dye concentrations, and also the adsorbent dosage on adsorption. The adsorption kinetic parameters confirmed the better fitting of pseudo-second order kinetic model for both of methylene blue and thymol blue. The isotherm data of methylene blue and thymol blue could be well described by the Freundlich isotherm model which means the adsorption is multilayer adsorption with non-uniform distribution of adsorption heat and affinities over the heterogeneous surface. The maximum adsorption capacity (KF) of methylene blue and thymol blue is found to be 0.2736 (L/mg) and 11.18407 (L/mg) respectively. The high specific surface area and the porous structure with some acidic functional groups on the surface were obviously responsible for high dyes adsorption onto hydroxyapatite (HA). Adsorption kinetics data were modeled with the application of Pseudo first order, Pseudo second order and Intraparticle diffusion models. The results revealed that the Pseudo second order model was the best fitting model. Which means that, the adsorption mechanism followed two stages in which the first one was fast and the other was slower step. Which means the adsorption of dye molecules was limited by intra particle diffusion and film diffusion, as well as, the adsorption rate in both of adsorption system are depends only on the slower step.The Boyd plot exposed that the intra-particle diffusion was the rate controlling step of the adsorption process of both of methylene blue and thymol blue molecules by HA powder. However, the adsorption of methylene blue molecules (basic solution) using of HA as adsorbent particles is found to be extremely preferable than thymol blue molecules.

scholarly journals Kinetic Study of the Bioadsorption of Methylene Blue on the Surface of the Biomass Obtained from the Algae D. antarctica

2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Jhonatan R. Guarín ◽  
Juan Carlos Moreno-Pirajan ◽  
Liliana Giraldo
Keyword(s):  
Methylene Blue ◽  
Kinetic Study ◽  
Adsorption Capacity ◽  
Scientific Community ◽  
Second Order ◽  
Maximum Adsorption Capacity ◽  
Pseudo Second Order ◽  
Best Fit ◽  
Total Elimination ◽  
Purification Of Water

Currently, there is a great pollution of water by the dyes; due to this, several studies have been carried out to remove these compounds. However, the total elimination of these pollutants from the aquatic effluents has represented a great challenge for the scientific community, for which it is necessary to carry out investigations that allow the purification of water. In this work, we studied the bioadsorption of methylene blue on the surface of the biomass obtained from the algae D. antarctica. This material was characterized by SEM and FTIR. To the data obtained in the biosorption experiments, different models of biosorption and kinetics were applied, finding that the best fit to the obtained data is given by applying the pseudo-second-order models and the Toth model, respectively. It was also determined that the maximum adsorption capacity of MB on the surface of the biomass is 702.9 mg/g, which shows that this material has great properties as a bioadsorbent.

scholarly journals Molybdenum Trioxide: Efficient Nanosorbent for Removal of Methylene Blue Dye from Aqueous Solutions

Molecules ◽  
2018 ◽  
Vol 23 (9) ◽  
pp. 2295 ◽  
Author(s):  
Souad Rakass ◽  
Hicham Oudghiri Hassani ◽  
Mostafa Abboudi ◽  
Fethi Kooli ◽  
Ahmed Mohmoud ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Aqueous Solutions ◽  
Removal Efficiency ◽  
Molybdenum Trioxide ◽  
Second Order ◽  
Blue Dye ◽  
Order Kinetic ◽  
Methylene Blue Dye ◽  
Removal Capacity ◽  
Pseudo Second Order

Nano Molybdenum trioxide (α-MoO3) was synthesized in an easy and efficient approach. The removal of methylene blue (MB) in aqueous solutions was studied using this material. The effects of various experimental parameters, for example contact time, pH, temperature and initial MB concentration on removal capacity were explored. The removal of MB was significantly affected by pH and temperature and higher values resulted in increase of removal capacity of MB. The removal efficiency of Methylene blue was 100% at pH = 11 for initial dye concentrations lower than 150 ppm, with a maximum removal capacity of 152 mg/g of MB as gathered from Langmuir model. By comparing the kinetic models (pseudo first-order, pseudo second-order and intraparticle diffusion model) at various conditions, it has been found that the pseudo second-order kinetic model correlates with the experimental data well. The thermodynamic study indicated that the removal was endothermic, spontaneous and favorable. The thermal regeneration studies indicated that the removal efficiency (99%) was maintained after four cycles of use. Fourier Transform Infrared (FTIR) and Scanning Electron Microscopy (SEM) confirmed the presence of the MB dye on the α-MoO3 nanoparticles after adsorption and regeneration. The α-MoO3 nanosorbent showed excellent removal efficiency before and after regeneration, suggesting that it can be used as a promising adsorbent for removing Methylene blue dye from wastewater.

Alkaline deoxygenated graphene oxide as adsorbent for cadmium ions removal from aqueous solutions

2015 ◽  
Vol 71 (11) ◽  
pp. 1611-1619 ◽  
Author(s):  
Jun Liu ◽  
Hongyan Du ◽  
Shaowei Yuan ◽  
Wanxia He ◽  
Pengju Yan ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Aqueous Solutions ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Transmission Electron ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Ft Ir

Alkaline deoxygenated graphene oxide (aGO) was prepared through alkaline hydrothermal treatment and used as adsorbent to remove Cd(II) ions from aqueous solutions for the first time. The characterization results of transmission electron microscopy, X-ray diffraction, Raman spectroscopy, and Fourier transform infrared (FT-IR) spectra indicate that aGO was successfully synthesized. The batch adsorption experiments showed that the adsorption kinetics could be described by the pseudo-second-order kinetic model, and the isotherms equilibrium data were well fitted with the Langmuir model. The maximum adsorption capacity of Cd(II) on aGO was 156 mg/g at pH 5 and T = 293 K. The adsorption thermodynamic parameters indicated that the adsorption process was a spontaneous and endothermic reaction. The mainly adsorption mechanism speculated from FT-IR results may be attributed to the electrostatic attraction between Cd2+ and negatively charged groups (–CO−) of aGO and cation-π interaction between Cd2+ and the graphene planes. The findings of this study demonstrate the potential utility of the nanomaterial aGO as an effective adsorbent for Cd(II) removal from aqueous solutions.

Sign in / Sign up

Export Citation Format

Share Document