scholarly journals Kinetic Study of the Bioadsorption of Methylene Blue on the Surface of the Biomass Obtained from the Algae D. antarctica

2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Jhonatan R. Guarín ◽  
Juan Carlos Moreno-Pirajan ◽  
Liliana Giraldo
Keyword(s):  
Methylene Blue ◽  
Kinetic Study ◽  
Adsorption Capacity ◽  
Scientific Community ◽  
Second Order ◽  
Maximum Adsorption Capacity ◽  
Pseudo Second Order ◽  
Best Fit ◽  
Total Elimination ◽  
Purification Of Water

Currently, there is a great pollution of water by the dyes; due to this, several studies have been carried out to remove these compounds. However, the total elimination of these pollutants from the aquatic effluents has represented a great challenge for the scientific community, for which it is necessary to carry out investigations that allow the purification of water. In this work, we studied the bioadsorption of methylene blue on the surface of the biomass obtained from the algae D. antarctica. This material was characterized by SEM and FTIR. To the data obtained in the biosorption experiments, different models of biosorption and kinetics were applied, finding that the best fit to the obtained data is given by applying the pseudo-second-order models and the Toth model, respectively. It was also determined that the maximum adsorption capacity of MB on the surface of the biomass is 702.9 mg/g, which shows that this material has great properties as a bioadsorbent.

scholarly journals Preparation, characterization and application of the nanocomposite PCL-PEG-PCL / Bentonite-TBHSA to the removal of methylene blue (MB) dye: Adsorption, Kinetics, and Isotherm studies

2021 ◽  
Author(s):  
Zohra Draoua ◽  
Amine Harrane ◽  
Mehdi Adjdir
Keyword(s):  
Methylene Blue ◽  
Adsorption Capacity ◽  
Dye Adsorption ◽  
Second Order ◽  
X Ray Diffraction ◽  
Optimal Value ◽  
Initial Ph ◽  
Pseudo Second Order ◽  
Adsorption Kinetics And Isotherm ◽  
Best Fit

Abstract This study focuses on the synthesis, characterization, and application of amphiphilic PCL-PEG-PCL/Bentonite-TBHSA (A2). The prepared of A2 nanocomposite was prepared from Algerian Bentonite modified by the intercalation of tetrabutylammonium hydrogen sulfate (TBHSA) (A1), were characterized by different techniques including Fourier transform infrared spectroscopy (FTIR), X-ray diffraction(XRD), (TEM),(DSC) and thermogravimetric analysis (TGA ). The removal efficiency of of methylene blue, from aqueous solutions. The effects of the initial pH of a solution, contact time, and nanocomposite mass on the adsorption efficiency were investigated. Pseudo-first/second-order isotherms were applied to determine the efficiency of nanocomposite solid. The experimental data fitted well with the pseudo-second-order model for MB dye adsorption. The mass of nanocomposite increased, the adsorption capacity of dye increases to reach an optimal value at 0.13 g of adsorbent in pH = 6.8. The Langmuir isotherm exhibited the best fit, with an adsorption capacity equal to 600 mg/g .

scholarly journals Optimization of the sorption of selected polycyclic aromatic hydrocarbons by regenerable graphene wool

2019 ◽  
Vol 80 (10) ◽  
pp. 1931-1943 ◽  
Author(s):  
Adedapo O. Adeola ◽  
Patricia B. C. Forbes
Keyword(s):  
Polycyclic Aromatic Hydrocarbons ◽  
Adsorption Capacity ◽  
Aromatic Hydrocarbons ◽  
Kinetic Data ◽  
Second Order ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Polycyclic Aromatic ◽  
Pseudo Second Order ◽  
Best Fit

Abstract A novel graphene wool (GW) material was used as adsorbent for the removal of phenanthrene (PHEN) and pyrene (PYR) from aqueous solution. Adsorption kinetics, adsorption isotherms, thermodynamics of adsorption and effect of pH, ionic strength, and temperature on the adsorption of PHEN and PYR onto GW were comprehensively investigated. Isothermal and kinetic experimental data were fitted to Langmuir, Freundlich, Temkin, Sips and Dubinin–Radushkevich models, as well as pseudo-first-order and pseudo-second-order kinetic models. The adsorption kinetic data best fit the pseudo-second-order kinetic model for PHEN and PYR sorption with R2 value >0.999, whilst the Sips model best fit isotherm data. Kinetic data revealed that 24 hr of contact between adsorbent and polycyclic aromatic hydrocarbons (PAHs) was sufficient for maximum adsorption, where the Langmuir maximum adsorption capacity of GW for PHEN and PYR was 5 and 20 mg g−1 and the optimum removal efficiency was 99.9% and 99.1%, respectively. Thermodynamic experiments revealed that adsorption processes were endothermic and spontaneous. Desorption experiments indicated that irreversible sorption occurred with a hysteresis index greater that zero for both PAHs. The high adsorption capacity and potential reusability of GW makes it a very attractive material for removal of hydrophobic organic micro-pollutants from water.

Kinetics of lead ion biosorption from aqueous solution onto lyophilized Aspergillus niveus

2010 ◽  
Vol 5 (1) ◽  
Author(s):  
Hülya Karaca ◽  
Turgay Tay ◽  
Merih Kıvanç
Keyword(s):  
Adsorption Capacity ◽  
Correlation Coefficients ◽  
Freundlich Isotherm ◽  
Second Order ◽  
Lead Ions ◽  
Lead Ion ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Aspergillus Niveus ◽  
Pseudo Second Order

The biosorption of lead ions (Pb2+) onto lyophilized fungus Aspergillus niveus was investigated in aqueous solutions in a batch system with respect to pH, contact time and initial concentration of the ions at 30 °C. The maximum adsorption capacity of lyophilized A. niveus was found to be 92.6 mg g−1 at pH 5.1 and the biosorption equilibrium was established about in 30 min. The adsorption capacity obtained is one of the highest value among those reported in the literature. The kinetic data were analyzed using the pseudo-first-order kinetic, pseudo-second-order kinetic, and intraparticle diffusion equations. Kinetic parameters, such as rate constants, equilibrium adsorption capacities, and related correlation coefficients for the kinetic models were calculated and discussed. It was found that the adsorption of lead ions onto lyophilized A. niveus biomass fit the pseudo-second-order kinetic model well. The Langmuir and Freundlich isotherm parameters for the lead ion adsorption were applied and the Langmuir model agreed better with the adsorption of lead ions onto lyophilized A. niveus.

Biopolymeric Adsorbent for the Removal of Methylene Blue: Characterizations, Equilibrium Isotherms and Kinetic Studies

2015 ◽  
Vol 1125 ◽  
pp. 281-285
Author(s):  
Siti Aishah Muhmed ◽  
Mohd Ghazali Mohd Nawawi
Keyword(s):  
Methylene Blue ◽  
Adsorption Capacity ◽  
Correlation Coefficient ◽  
Kinetic Studies ◽  
Second Order ◽  
Equilibrium Isotherms ◽  
Chi Square ◽  
Initial Concentration ◽  
Adsorbent Dosage ◽  
Pseudo Second Order

Crosslinked Sago Starch (CSS) was prepared by crosslinking native starch with Sodium Trimetaphosphate. As a biodegradable adsorbent, CSS was used to remove methylene blue (MB) from the aqueous solution based on its characterization, including the granule morphology, crystalline nature and molecular structure. The adsorption capacity of CSS was evaluated as a function of pH, adsorbent dosage, initial concentration and time. It was favorable for adsorption under condition of neutral and at high initial concentration. The adsorption capacity trend was decreased with increasing the adsorbent dosage. The equilibrium isotherms were conducted using Langmuir, Freundlich and Tempkin model. It has been demonstrated that the better agreement was Langmuir isotherm with correlation coefficient of 0.99, equilibrium adsorption capacity of 3.75 mg g-1, chi-square test, χ2 of 0.03% and corresponding contact time of 4 hours. The pseudo-first-order, pseudo-second-order and intra-particle diffusion were used to fit adsorption data in the kinetic studies. And results showed that the adsorption kinetics was more accurately described by the pseudo-second-order model with correlation coefficient, R2 of 0.99 and standard deviation, SSE of 0.12%. The obtained results suggest that CSS could be promising candidates as an adsorbent for dye removal.

scholarly journals Adsorption of Copper(II) and Mercury(II) Ions onto Chemically-Modified Chitosan Membranes: Equilibrium and Kinetic Properties

2012 ◽  
Vol 30 (1) ◽  
pp. 1-21 ◽  
Author(s):  
R.B. Rabelo ◽  
R.S. Vieira ◽  
F.M.T. Luna ◽  
E. Guibal ◽  
M.M. Beppu
Keyword(s):  
Adsorption Capacity ◽  
Metal Ion ◽  
Batch Process ◽  
Second Order ◽  
Infrared Spectrometry ◽  
Maximum Adsorption Capacity ◽  
Kinetic Properties ◽  
Pseudo Second Order ◽  
Ft Ir ◽  
Chitosan Membranes

Cross-linked chitosan was synthesized with glutaraldehyde (chitosan–GLA) and epichlorohydrin (chitosan–ECH). The structures of these matrices were characterized by elemental analysis, Fourier-transform infrared spectrometry (FT-IR), the degree of de-acetylation and the surface topography as determined via scanning electron microscopy (SEM). After promoting interaction with the metal ion, the adsorbent was also studied using FT-IR and energy dispersive X-ray spectroscopy (EDXS). Adsorption studies for Cu(II) and Hg(II) ions were carried out in a batch process. The adsorption kinetics were tested using three models, viz. pseudo-first-order, pseudo-second-order and intra-particle diffusion. The experimental kinetic data were best fitted by the pseudo-second-order model for Cu(II) ions (R2 ≥ 0.98) and for Hg(II) ions (R2 = 0.99). Higher rate constants (k2) were obtained for the adsorption of Cu(II) ions onto chitosan–GLA [1.40 g/(mmol h)] and for Hg(II) ions onto raw chitosan [5.65 g/(mmol h)]. The adsorption rate depended on the concentration of Cu(II) and Hg(II) ions on the adsorbent surface and on the quantity of ions adsorbed at equilibrium. At 293 K, the Langmuir–Freundlich model provided a better fit to the adsorption isotherms on both raw and cross-linked chitosan membranes. The maximum adsorption capacity for Cu(II) ions was obtained with the chitosan–GLA matrix (2.7 mmol/g). A maximum adsorption capacity of 3.1 mmol/g was attained for Hg(II) ions onto the chitosan–ECH matrix.

Equilibrium, kinetic and thermodynamic studies of mercury adsorption on almond shell

2012 ◽  
Vol 65 (8) ◽  
pp. 1341-1349 ◽  
Author(s):  
Shokooh Sadat Khaloo ◽  
Amir Hossein Matin ◽  
Sahar Sharifi ◽  
Masoumeh Fadaeinia ◽  
Narges Kazempour ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Low Cost ◽  
Second Order ◽  
Ion Concentration ◽  
Physical Parameters ◽  
Maximum Adsorption Capacity ◽  
Almond Shell ◽  
Pseudo Second Order ◽  
Uptake Process ◽  
Reaction Equations

The application of almond shell as a low cost natural adsorbent to remove Hg2+ from aqueous solution was investigated. Batch experiments were carried out to evaluate the adsorption capacity of the material. The chemical and physical parameters such as pH, sorbent amount, initial ion concentration, and contact time were optimized for the maximum uptake of mercury onto the solid surface. Adsorption isotherms were expressed by Langmuir and Freundlich adsorption models, and the experimental data were found to fit the Langmuir model rather than the Freundlich. The maximum adsorption capacity obtained from the Langmuir isotherm was 135.13 mg/g. A kinetic study was carried out with pseudo-first-order and pseudo-second-order reaction equations and it was found that the Hg2+ uptake process followed the pseudo-second-order rate expression. The thermodynamic values, ΔG0, ΔH0 and ΔS0, indicated that adsorption was an endothermic and spontaneous process. The potential of this material for mercury elimination was demonstrated by efficient Hg2+ removal from a synthetic effluent.

scholarly journals Removal of triphenylmethane dye from aqueous solutions through an adsorption process over waste materials

2020 ◽  
Vol 10 (4) ◽  
pp. 5772-5779
Keyword(s):  
Adsorption Isotherm ◽  
Adsorption Capacity ◽  
Dye Removal ◽  
Functional Group ◽  
Adsorption Process ◽  
Removal Rate ◽  
Freundlich Isotherm ◽  
Second Order ◽  
Pseudo Second Order ◽  
Best Fit

Water pollution is the most significant issue due to rapid growing industrial development especially textile dye industry. Therefore, the adsorption process experiment was conducted to determine the removal ability of the adsorbent chosen. The removal rate and adsorption capacity of Phenol red and Cresol were analyzed by using eggshell adsorbent in the adsorption process. The experiment was conducted with parameters of initial concentration, dosage, pH and contact time. Results indicated that the removal rate achieved more than 90% and the adsorption capacity exceeded more than 5 mg/g. The functional group before adsorption process eggshell adsorbent and after adsorption process eggshell adsorbent was analyzed by using FTIR (Fourier Transform Infrared Spectroscopy). The study of adsorption isotherm and kinetics model was carried out to identify the efficiency of the eggshell adsorbent reacting with the dye solution. The adsorption isotherm that applied in this research was Langmuir isotherm, Jovanovic isotherm and Freundlich isotherm. Moreover, Pseudo-first-order and Pseudo-second-order chosen were conducted to determine the kinetic studies. In short, eggshell adsorbent is highly effective on dye removal through adsorption capacity. The functional group of the eggshell adsorbent was found such as alcohols, phenol, alkanes, carbonyls, ester, saturated aliphatic, aldehydes, aromatics, 2°amines and phosphorus. For kinetics study, Freundlich isotherm was analyzed as the best fit isotherm model as it achieved the highest R2 value which is closed to 1 and Pseudo-second-order was analyzed as the best fit kinetic model in this experiment. Therefore, eggshell adsorbent is highly effective in dye removal.

scholarly journals Effectiveness of Alkali-Acid Treatment in Enhancement the Adsorption Capacity for Rice Straw: The Removal of Methylene Blue Dye

2013 ◽  
Vol 2013 ◽  
pp. 1-15 ◽  
Author(s):  
Nady A. Fathy ◽  
Ola I. El-Shafey ◽  
Laila B. Khalil
Keyword(s):  
Methylene Blue ◽  
Adsorption Capacity ◽  
Rice Straw ◽  
Acid Treatment ◽  
Low Cost ◽  
Second Order ◽  
Isotherm Models ◽  
Blue Dye ◽  
Acid Modification ◽  
Pseudo Second Order

The effectiveness of alkali-acid modification in enhancement the adsorption capacity of rice straw (RS) for removing a basic dye was studied. The obtained adsorbents were characterized by slurry pH, pHPZC, iodine number, methylene blue number, FTIR, and SEM analyses. Adsorption of methylene blue (MB) was described by the Langmuir, Freundlich, Tempkin, and Redlich-Peterson isotherm models. Effects of contact time, initial concentration of MB dye, pH of solution, adsorbent dose, salt concentration of NaCl, and desorbing agents on the removal of MB were reported. Kinetic studies were analyzed using the pseudo-first-order, pseudo-second-order, and the intraparticle diffusion models and were found to follow closely the pseudo-second-order model. Equilibrium data were best represented by the Langmuir and Redlich-Peterson isotherms. The adsorption capacities were varied between 32.6 and 131.5 mg/g for untreated and treated RS samples with NaOH-1M citric acid (ARS-1C), respectively. Adsorption behavior of the ARS-1C sample was experimented in a binary mixture containing methylene blue (basic) and reactive blue 19 (acidic) dyes which showed its ability to remove MB higher than RB19. Overall, the results indicate that the alkali-acid treatment proved to be potential modification for producing effective low-cost adsorbents for the removal of the basic dyes from wastewater.

Synthesis and characterization of a new magnetic adsorbent for removal of 4-nitrophenol: application of response surface methodology

2019 ◽  
Vol 80 (8) ◽  
pp. 1430-1442
Author(s):  
Reza Gholamnia ◽  
Mehrnoosh Abtahi ◽  
Reza Saeedi ◽  
Shokooh Sadat Khaloo
Keyword(s):  
Graphene Oxide ◽  
Adsorption Capacity ◽  
Response Surface ◽  
Second Order ◽  
Quadratic Model ◽  
Maximum Adsorption Capacity ◽  
Modified Graphene Oxide ◽  
Pseudo Second Order ◽  
Modified Graphene ◽  
Graphene Oxide Sheets

Abstract Magnetic modified graphene oxide was synthesized as a new modified magnetic nano-composite (MMNC) by a simple sonochemical–hydrothermal method. The sonochemical reaction was employed to exfoliate, functionalize and decorate neomycin on graphene oxide sheets. Nickel ferromagnetic particles were synthesized by hydrothermal co-precipitation method and decorated on neomycin-modified graphene oxide. The morphology and chemical structure of MMNC were characterized by scanning electron microscopy, energy dispersive spectroscopy and X-ray diffraction spectroscopy. The adsorption capability of MMNC for removal of phenolic compounds was assessed through adsorption of 4-nitrophenol (4-NP) from aqueous solution. The three-factor Box–Behnken design coupled with response surface method was applied to evaluate and optimize the important variables which affect the adsorption process. A significant quadratic model (p-value <0.05, R2(adj) = 0.9593) was derived using analysis of variance. The maximum adsorption capacity of 125.4 mg 4-NP/g MMNC at pH 6 was obtained, which was comparable in some cases and higher than most adsorbents reported in the literature. The presence of neomycin on graphene oxide sheets improved the maximum adsorption capacity of the nano-sorbent up to 28% (from 98.7 to 125.4 mg 4-NP/g adsorbent). The adsorption isotherms fitted well with the Langmuir model (Langmuir constant b = 0.064 l/mg, R2 = 0.9989) and the kinetic study showed that the nitrophenol uptake process followed the pseudo-second-order rate expression (R2 ≥ 0.9960, pseudo-second-order constant K2 ≥ 1.7 × 10−3).

Chromium (VI) adsorption onto activated sulfate lignin

2009 ◽  
Vol 4 (2) ◽  
Author(s):  
Nassima Tazrouti ◽  
Moussa Amrani
Keyword(s):  
Adsorption Capacity ◽  
Contact Time ◽  
Analytical Data ◽  
Order Equation ◽  
Second Order ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Adsorption Model ◽  
Chromium Vi ◽  
Pseudo Second Order

Activated lignin having surface area of 1023 m2.g-1 has been prepared from sulfate lignin that was treated by 30 % H2O2 and carbonized at 300 °C in order to test the chromium (VI) adsorption from aqueous solution. The influence of contact time, pH, initial concentration of adsorbent and adsorbate and temperature on the adsorption capacity were investigated. The maximum removal of Cr(VI) was found to be 92,36 % at pH=2 and contact time of 80 min. Optimal concentration of lignin and Cr(VI) were found to be 3.8 g.l-1 and 180 mg.l-1, respectively. The adsorption kinetics was tested pseudo-first-order and pseudo-second-order equation. The analytical data were fitted well in a pseudo-second-order equation and the rate of removal of chromium was found to speed up with increasing temperature. Activation energy for the adsorption process was found to be 18.19 Kj.mol-1. The Langmuir and Freundlich adsorption isotherm models were applied to describe the isotherm and isotherm constants for the adsorption of Cr (VI) on lignin. These constants and correlation coefficients of the isotherm models were calculated and compared. Results indicated that Cr (VI) uptake could be described by the Langmuir adsorption model. The maximum adsorption capacity (qm) of Cr (VI) on lignin was 75.75 mg.g-1 at temperature of 40°C. The dimensionless equilibrium parameter (RL) signified a favorable adsorption of Cr (VI) on lignin and was found between 0.0601 and 0.818 (0<RL<1). The thermodynamic parameters like ΔG°, ΔS° and ΔH° were calculated and it has been found that the reaction was spontaneous and endothermic in nature. This study indicates that lignin has the potential to become an effective and economical adsorbent for removal Cr (VI) from the waste water.

Sign in / Sign up

Export Citation Format

Share Document