scholarly journals Optimizing air velocity for the underfloor forced ventilation to protect a refrigerated warehouse from frost heaving

2018 ◽  
Vol 38 (3) ◽  
pp. 321-327
Author(s):  
Jingfu Jia ◽  
Manjin Hao ◽  
Jianhua Zhao
Keyword(s):  
Heat Transfer ◽  
Mathematical Model ◽  
Natural Ventilation ◽  
Ventilation System ◽  
Three Dimensional ◽  
Temperature Fields ◽  
Frost Heave ◽  
Forced Ventilation ◽  
Air Velocity ◽  
Set Up

Forced or natural ventilation is the most common measure of frost heave protection for refrigerated warehouse floor. To optimize air velocity for the underfloor forced ventilation system of refrigerated warehouse, a steady state three-dimensional mathematical model of heat transfer is set up in this paper. The temperature fields of this system are simulated and calculated by CFD software PHOENICS under different air velocity, 1.5m/s, 2.5m/s or 3.5m/s. The results show that the optimized air velocity is 1.5m/s when the tube spacing is 1.5m.

Numerical simulation of dispersion and distribution behaviors of hydrogen leakage in the garage with a crossbeam

SIMULATION ◽  
2019 ◽  
Vol 95 (12) ◽  
pp. 1229-1238 ◽  
Author(s):  
Yunhao Li ◽  
Juncheng Jiang ◽  
Yuan Yu ◽  
Qingwu Zhang
Keyword(s):  
Mole Fraction ◽  
Natural Ventilation ◽  
Stokes Equations ◽  
Ventilation System ◽  
Three Dimensional ◽  
Dynamics Simulation ◽  
Navier Stokes ◽  
Explosion Hazard ◽  
Safety Issues ◽  
Set Up

A three-dimensional computational fluid dynamics simulation model resolved by the unsteady Reynolds-Averaged Navier–Stokes equations was developed to predict hydrogen dispersion in an indoor environment. The effect of the height of the crossbeam (Hc) on hydrogen dispersion and distribution behaviors in a four-car garage was numerically investigated under fully confined and natural ventilation conditions. For the fully confined condition, the garage was almost completely filled with a flammable hydrogen cloud at t=600 s. In addition, the volumetric ratio of the flammable region, thickness of the hydrogen stratification, and hydrogen mole fraction all increased as Hc increased. When two symmetric ventilation openings were set up, the volumetric ratio of the flammable region decreased by 50% at t=600 s. Moreover, Hc had evident influence on the vertical distribution of hydrogen mole fraction. In addition, there existed little explosion hazard under the height of 1.6 m. The results show that Hc was a non-negligible factor for the safety design of hydrogen in the garage and Hc=0.12 m was the optimal height of the crossbeam. Furthermore, the ventilation system in the present study cannot completely eliminate the risk of hydrogen explosion. The present risk assessment results can be useful to analyze safety issues in automotive applications of hydrogen.

Digital Assignments for Thermo-Fluids Courses

2021 ◽  
Author(s):  
Ivana Milanovic ◽  
Tom A. Eppes ◽  
Kalyan Goparaju
Keyword(s):  
Heat Transfer ◽  
Three Dimensional ◽  
Primary Objective ◽  
Temperature Fields ◽  
Ansys Fluent ◽  
Theoretical Concepts ◽  
Communication Course ◽  
Graphic Communication ◽  
Flow And Heat Transfer ◽  
Set Up

Abstract Simulations were used in lecture-based courses, Thermodynamics I and Thermodynamics II, for demonstration purposes and as digital assignments. Digital assignments were separate from the customary pencil & paper homework given once a week. The primary objective was to model the flow and heat transfer in a system, reinforce theoretical concepts, and allow study of more complex two- and three-dimensional problems. Students encounter fluid flow and heat transfer in the sophomore course, Thermodynamics I, for the first time. Velocity, pressure and temperature fields are quite complicated even for simple geometries, hard to visualize, and difficult to understand. Digital assignments go beyond basic theoretical concepts and relatively simple pencil & paper problems. Initially, there were 6 digital assignments in each course. After the first offerings and assessments, the number of assignments is expected to grow to 8–10. Scaffolding of digital assignments ensured that simulations gain in complexity as students become more familiar with both the theoretical underpinnings and the software interface. Our Mechanical Engineering program, has a freshmen graphic communication course incorporating AutoCAD and a junior CAD course with SolidWorks and Ansys. This provided both a challenge and an opportunity for lecture-based thermo-fluids courses positioned ‘in between.’ Modern computational skills were obtained outside the classroom, and that was accomplished with effective use of an on-line environment. Ansys Fluent was chosen to present and reinforce thermo-fluids fundamentals. Each digital assignment had a mesh, detailed grading criteria, and supplementary documentation. Students worked on the: (1) problem set up in the preprocessor-stage, (2) solver, and (3) postprocessor. This approach helped students (1) understand the flow and heat transfer inside the system as well as the application of conservation of mass and energy, (2) understand and interpret results by comparing them with theoretical and experimental data, (3) develop modern technical skills relevant to the demands of Industry 4.0, and (4) develop research capabilities. Simulations in the classroom and as digital assignments are a representation of the real world, and provide an egalitarian and unrestricted way for students to interact with it, acquiring skills and an appreciation for subject matter as well as the engineering profession. Semester long discussions on various aspects of digital assignments help develop a mentor-mentee bond. This approach to teaching, research and mentoring does not depend on access to laboratory facilities and funding that can reach only a limited number of students. It encourages students’ spirit of inquiry, and ultimately leads to a professional development opportunities beyond the classroom setting.

scholarly journals Three-Dimensional Simulation of Wind-Driven Ventilation Through a Windcatcher With Different Inlet Designs

2019 ◽  
Vol 12 (4) ◽  
Author(s):  
Peter Abdo ◽  
Rahil Taghipour ◽  
B. Phuoc Huynh
Keyword(s):  
Wind Speed ◽  
Average Velocity ◽  
Natural Ventilation ◽  
Ventilation System ◽  
Three Dimensional ◽  
Cfd Modeling ◽  
Ansys Fluent ◽  
Wind Velocities ◽  
Dimensional Simulation ◽  
Convergent Inlet

Abstract Windcatcher is an effective natural ventilation system, and its performance depends on several factors including wind speed and wind direction. It provides a comfortable and healthy indoor environment since the introduced fresh air decreases the moisture content and reduces the pollutant concentration. Since the wind speed and its direction are generally unpredictable, it is important to use special inlet forms and exits to increase the efficiency of a windcatcher. In this study, computational fluid dynamics (CFD) modeling is implemented using ansys fluent to investigate the airflow entering a three-dimensional room through a windcatcher with different inlet designs. Three designs are studied which are a uniform inlet, a divergent inlet, and a bulging-convergent inlet. The airflow pattern with all inlets provided adequate ventilation through the room. With all the applied wind velocities (1, 2, 3, and 6 m/s) at the domain's inlet, the divergent inlet shape has captured the highest airflow through the room and provided higher average velocity at 1.2 m high enhancing the thermal comfort where most of the human occupancy occurs. With 6 m/s wind velocity, the divergent inlet has captured 2.55% more flow rate compared to the uniform inlet and 4.70% compared to the bulging-convergent inlet, and it has also provided an average velocity at 1.2 m high in the room of 7.16% higher than the uniform inlet and 8.44% higher than the bulging-convergent inlet.

scholarly journals Numerical simulations for the optimisation of ventilation system designed for wine cellars

2019 ◽  
Vol 50 (4) ◽  
pp. 180-190 ◽  
Author(s):  
Enrica Santolini ◽  
Alberto Barbaresi ◽  
Daniele Torreggiani ◽  
Patrizia Tassinari
Keyword(s):  
Natural Ventilation ◽  
Ventilation System ◽  
Climatic Conditions ◽  
Mold Growth ◽  
Critical Factors ◽  
Air Velocity ◽  
Wine Production ◽  
First Case ◽  
Dynamics Modelling ◽  
Optimal Configurations

The wine-ageing process is one of the most important phases of the wine production and it can be considerably affected by the micro-climatic conditions inside the ageing rooms. Underground wine cellars in small-medium wineries are designed with natural ventilation systems, able to maintain optimal indoor condition. However, critical factors emerge, such as mold growth or wine evapo-transpiration, where ventilation proved to be poorly designed, insufficient in the first case or excessive in the second one. The zones around the wooden barrels proved to be the most sensitive and problematic. These areas are the most investigated in terms of temperature and humidity values but surprisingly not in terms of air velocity. In this paper, a ventilation system has been designed and optimised to support the lack of ventilation, by means of computational fluid dynamics modelling. Eight configurations have been performed and analysed, identifying the best two according to the air velocity range. Specific parameters have been defined to appreciate the application limits of each configuration. These parameters can be used as reference for system design in similar studies and applications and can help scholars and professionals to identify the optimal configurations for the implementation and proper placement of the system inside a cellar.

Numerical Simulation of the Cooling Process of Cubic Shells

2011 ◽  
Author(s):  
Manabu Okura ◽  
Kiyoaki Ono
Keyword(s):  
Heat Transfer ◽  
Stokes Equations ◽  
Temperature Fields ◽  
Numerical Code ◽  
Navier Stokes ◽  
Cooling Process ◽  
Air Velocity ◽  
Navier Stokes Equations ◽  
The Difference ◽  
The Heat Transfer Coefficient

In order to keep the environment in an air-conditioned room comfortable, it is important to anticipate the air velocity and temperature fields precisely. The numerical code, solving simultaneously the Navier-Stokes equations governing flow field inside and outside the room and the heat conduction equation applying to walls, are developed. The assumption that the heat transfer coefficient between the fluid and the surface of solids is not used. This code is applied to investigate the cooling process of a cubic shell. The computational results agree with the experimental results. We also investigated the same process of the cubic shells whose walls are internally or externally insulated. The difference of the amount of heat transfer will be discussed.

Three Dimensional Simulation of Ventilation Flow Through a Solar Windcatcher

2019 ◽  
Author(s):  
Peter Abdo ◽  
Rahil Taghipour ◽  
B. P. Huynh
Keyword(s):  
Natural Ventilation ◽  
Air Flow ◽  
Ventilation System ◽  
Three Dimensional ◽  
Windward Side ◽  
Efficient Design ◽  
Indoor Space ◽  
Wind Speeds ◽  
Air Stream ◽  
Stack Ventilation

Abstract Natural ventilation is the process of supplying and removing air through an indoor space by natural means. There are two types of natural ventilation occurring in buildings: winddriven ventilation and buoyancy driven or stack ventilation. The most efficient design for natural ventilation in buildings should implement both types of natural ventilation. Stack ventilation which is temperature induced is driven by buoyancy making it less dependent on wind and its direction. Heat emitted causes a temperature difference between two adjoining volumes of air, the warmer air will have lower density and be more buoyant thus will rise above the cold air creating an upward air stream. Combining the wind driven and the buoyancy driven ventilation will be investigated in this study through the use of a windcatcher natural ventilation system. Stack driven air rises as it leaves the windcatcher and it is replaced with fresh air from outside as it enters through the positively pressured windward side. To achieve this, CFD (computational fluid dynamics) tool is used to simulate the air flow in a three dimensional room fitted with a windcatcher based on the winddriven ventilation alone, buoyancy driven ventilation alone, and combined buoyancy and winddriven ventilation. Different wind speeds between 0 up to 2.5 m/s are applied and the total air flow rate through the windcatcher is investigated with and without temperature of 350 K applied at the windcatcher’s outlet wall. As the wind speed increased the efficiency of the solar windcatcher decreased.

scholarly journals Unsteady Three-Dimensional MHD Non-Axisymmetric Homann Stagnation Point Flow of a Hybrid Nanofluid with Stability Analysis

Mathematics ◽  
2020 ◽  
Vol 8 (5) ◽  
pp. 784 ◽  
Author(s):  
Nurul Amira Zainal ◽  
Roslinda Nazar ◽  
Kohilavani Naganthran ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Mathematical Model ◽  
Stability Analysis ◽  
Differential Equations ◽  
Stagnation Point ◽  
Three Dimensional ◽  
Industrial Sector ◽  
Dual Solutions ◽  
Stagnation Point Flow ◽  
Hybrid Nanofluid

The hybrid nanofluid under the influence of magnetohydrodynamics (MHD) is a new interest in the industrial sector due to its applications, such as in solar water heating and scraped surface heat exchangers. Thus, the present study accentuates the analysis of an unsteady three-dimensional MHD non-axisymmetric Homann stagnation point flow of a hybrid Al2O3-Cu/H2O nanofluid with stability analysis. By employing suitable similarity transformations, the governing mathematical model in the form of the partial differential equations are simplified into a system of ordinary differential equations. The simplified mathematical model is then solved numerically by the Matlab solver bvp4c function. This solving approach was proficient in generating more than one solution when good initial guesses were provided. The numerical results presented significant influences on the rate of heat transfer and fluid flow characteristics of a hybrid nanofluid. The rate of heat transfer and the trend of the skin friction coefficient improve with the increment of the nanoparticles’ concentration and the magnetic parameter; however, they deteriorate when the unsteadiness parameter increases. In contrast, the ratio of the escalation of the ambient fluid strain rate to the plate was able to adjourn the boundary layer separation. The dual solutions (first and second solutions) are obtainable when the surface of the sheet shrunk. A stability analysis is carried out to justify the stability of the dual solutions, and hence the first solution is seen as physically reliable and stable, while the second solution is unstable.

scholarly journals Three-dimensional transient mathematical model to predict the heat transfer rate of a heat pipe

2015 ◽  
Vol 7 (2) ◽  
pp. 168781401456781 ◽  
Author(s):  
S Boothaisong ◽  
S Rittidech ◽  
T Chompookham ◽  
M Thongmoon ◽  
Y Ding ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Mathematical Model ◽  
Heat Pipe ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Three Dimensional

Numerical Analysis on the Temperature Field in Laser-Plasma Hybrid Welding of an Aluminum Alloy

2008 ◽  
Vol 580-582 ◽  
pp. 279-282
Author(s):  
Zhi Ning Li ◽  
Bao Hua Chang ◽  
Dong Du ◽  
Hua Zhang
Keyword(s):  
Heat Transfer ◽  
Aluminum Alloy ◽  
Laser Plasma ◽  
Three Dimensional ◽  
Temperature Fields ◽  
Transfer Model ◽  
Heat Sources ◽  
Hybrid Welding ◽  
Plasma Arc ◽  
Simulation Results

A three dimensional heat transfer model on laser-plasma hybrid welding has been proposed, that takes into account the interaction between laser beam and plasma arc. Through FEM computation, the temperature fields were computed and analyzed for an Al-Li alloy during laserplasma hybrid welding with different distances between the two heat sources. The simulation results are in agreement with the experimental results.

Sign in / Sign up

Export Citation Format

Share Document