scholarly journals Effect of molybdenum addition on microstructure and mechanical properties of plain carbon steel weld

10.30544/245 ◽  
2016 ◽  
Vol 22 (4) ◽  
pp. 269-284
Author(s):  
Jyoti Menghani ◽  
Kunal Dwivedi
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Process Parameters ◽  
Welding Speed ◽  
Welding Process ◽  
Grain Structure ◽  
Welding Parameters ◽  
Bead Width ◽  
Arc Voltage ◽  
Molybdenum Carbides

The present investigation has two main objectives; first is optimization of welding process parameters of submerged arc welding (SAW) using Taguchi philosophy and second is to improve the mechanical properties such as strength and microhardness of weld joint by alloying with varying amounts of molybdenum. For optimization of welding process, parameters Taguchi philosophy have been applied on a mild steel plate (AISI C- 1020) of 10 mm thickness with 60o groove angle with arc voltage and welding speed as variables and bead width as output variables. A mathematical relationship between bead width, arc voltage and welding speed has also been found using multiple regression analysis for the present base metal plate geometry. After optimizing welding parameters, molybdenum has been added individually to the welding area in varying percentages. The properties of alloyed and unalloyed weld metal bead are compared. The mechanical characterization of weld has been done in terms of microhardness, tensile strength, whereas microstructural characterization has been performed using optical microscopy, XRD and EDS. The presence of molybdenum resulted in bainite structure in weld bead having a refined grain structure, enhancement in tensile strength and microhardness. The XRD results showed the formation of molybdenum carbides justifying the increase in microhardness value.

scholarly journals Investigating the Effect of Metal Inert Gas Welding Parameters on AA10119 Mild Steel Quality by Taguchi Method

2021 ◽  
pp. 57-63
Author(s):  
Jephthah A. Ikimi ◽  
Aigbovbiosa A. Momodu ◽  
Erhuvwu Totore
Keyword(s):  
Tensile Strength ◽  
Mild Steel ◽  
Process Parameters ◽  
Welding Speed ◽  
Welding Process ◽  
Welding Current ◽  
Inert Gas ◽  
Welding Parameters ◽  
Optimal Setting ◽  
The Right

In welding, the quality of welded joints is greatly influenced by the welding process parameters. Thus, in order to achieve a good weld quality, there is exigency to select the right welding process parameters. The focus of this study is to investigate the effect of Metal Inert Gas (MIG) welding process parameters; welding current, welding voltage and welding speed on the tensile strength of mild steel AA10119 welded plates. The experiment was designed using Taguchi’s L9 orthogonal array with three levels. Kaierda MIG MAG Inverter CO2 Welder Model E-180 welding machine was used to conduct the experiments with three repetitions. From the analysis carried out by applying Taguchi’s method, the result shows that the welding speed and welding current have the most significant influence on tensile strength of the weld and an optimum parameter setting of A3B2C2 was suggested; welding current 240 A, welding voltage 25 V and welding speed 0.010 m/s. The mean tensile strength at this optimal setting A3B2C2 was predicted to be 442 N/mm2.

scholarly journals Effect of process parameters on mechanical properties of AA5052 joints using underwater friction stir welding

2020 ◽  
Vol 14 (1) ◽  
pp. 6259-6271
Author(s):  
Srinivasa Rao Pedapati ◽  
Dhanish Paramaguru ◽  
Mokhtar Awang ◽  
Hamed Mohebbi ◽  
Sharma V Korada
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Friction Stir Welding ◽  
Process Parameters ◽  
Welding Process ◽  
Welding Parameters ◽  
Fracture Characterization ◽  
Friction Stir ◽  
Weld Joints ◽  
Underwater Friction Stir Welding

Underwater Friction Stir Welding (UFSW) is a solid-state joining technique which uses a non-consumable tool to weld metals. The objective of this investigation is to evaluate the mechanical properties of the AA5052 Aluminium alloy joints prepared by UFSW. The effect of different type of welding tools and welding parameters on the weld joint properties are studied. Square, tapered cylindrical and taper threaded cylindrical type of welding tools have been used to produce the joints with the tool rotational speed varying from 500 rpm to 2000 rpm while the welding speed varying from 50 mm/min to 150 mm/min. Tensile strength, micro-hardness distribution, fracture features, micro-and macrostructure of the fabricated weld joints have been evaluated. The effect of welding process parameters that influences the mechanical properties and fracture characterization of the joints are explained in detail. A maximum Ultimate Tensile Strength (UTS) value of 222.07 MPa is attained with a gauge elongation of 14.78%. Microstructural evaluation revealed that most of the fracture are found on the thermal mechanically affected zone (TMAZ)adjacent to the weld nugget zone (WNZ) due to bigger grain sizes. It is found that most of the joints exhibit ductile characteristics in failure. Fractography analysis has been used to find the behavior of weld joints in failure.

Robotic Friction Stir Welding of AA5754 Aluminum Alloy Sheets at Different Initial Temper States

2014 ◽  
Vol 622-623 ◽  
pp. 540-547 ◽  
Author(s):  
Massimo Callegari ◽  
Archimede Forcellese ◽  
Matteo Palpacelli ◽  
Michela Simoncini
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Friction Stir Welding ◽  
Process Parameters ◽  
Welding Speed ◽  
Process Condition ◽  
Hybrid Structure ◽  
Welding Parameters ◽  
Friction Stir ◽  
Robotic Friction Stir Welding

Robotic friction stir welding experiments were performed on AA5754 aluminium alloy sheets, 2.5 mm in thickness, in two different temper states (H111 and O-annealed). A six axes robot with a hybrid structure, characterised by an arm with parallel kinematics and a roll-pitch-roll wrist with serial kinematics, was used. The effect of the process parameters on the macro-and micro-mechanical properties and microstructure of joints was widely analysed. It was shown that, under the same process condition, the mechanical properties of the joints are strongly influenced by the initial temper state of the alloy. In particular, as AA5754-H111 is welded, the ultimate tensile strength is not significantly affected by the process parameters whilst the ultimate elongation significantly depends on the welding speed. In AA5754-O, both ultimate values of tensile strength and elongation are affected by the welding speed whilst a negligible effect of the rotational speed can be observed. Irrespective of the welding parameters, the H111 temper state leads to mechanical properties higher than those given by the O-annealed state. An investigation has been also carried out in order to evaluate the micro-hardness profiles and microstructure of the FSWed joints in order to understand the mechanisms operating during robotic friction stir welding.

scholarly journals Prediction of Bead Geometry with Changing Welding Speed Using Artificial Neural Network

Materials ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1494
Author(s):  
Ran Li ◽  
Manshu Dong ◽  
Hongming Gao
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Welding Speed ◽  
Gas Metal Arc Welding ◽  
Welding Process ◽  
Training Dataset ◽  
Welding Parameters ◽  
Bead Geometry ◽  
Bead Width ◽  
Artificial Neural

Bead size and shape are important considerations for industry design and quality detection. It is hard to deduce an appropriate mathematical model for predicting the bead geometry in a continually changing welding process due to the complex interrelationship between different welding parameters and the actual bead. In this paper, an artificial neural network model for predicting the bead geometry with changing welding speed was developed. The experiment was performed by a welding robot in gas metal arc welding process. The welding speed was stochastically changed during the welding process. By transient response tests, it was indicated that the changing welding speed had a spatial influence on bead geometry, which ranged from 10 mm backward to 22 mm forward with certain welding parameters. For this study, the input parameters of model were the spatial welding speed sequence, and the output parameters were bead width and reinforcement. The bead geometry was recognized by polynomial fitting of the profile coordinates, as measured by a structured laser light sensor. The results showed that the model with the structure of 33-6-2 had achieved high accuracy in both the training dataset and test dataset, which were 99% and 96%, respectively.

scholarly journals Study of Laser Welding of HCT600X Dual Phase Steels

2014 ◽  
Vol 22 (1) ◽  
pp. 93-98
Author(s):  
Pavol Švec ◽  
Viliam Hrnčiar ◽  
Alexander Schrek
Keyword(s):  
Tensile Strength ◽  
Base Metal ◽  
Heat Affected Zone ◽  
Welding Speed ◽  
Welding Process ◽  
Beam Power ◽  
Welding Parameters ◽  
Dual Phase ◽  
Welded Steel ◽  
Steel Sheets

AbstractThe effects of beam power and welding speed on microstructure, microhardnes and tensile strength of HCT600X laser welded steel sheets were evaluated. The welding parameters influenced both the width and the microstructure of the fusion zone and heat affected zone. The welding process has no effect on tensile strength of joints which achieved the strength of base metal and all joints fractured in the base metal.

Prediction and optimization of the mechanical properties of dissimilar friction stir welding of aluminum alloys using design of experiments

2016 ◽  
Vol 232 (8) ◽  
pp. 1384-1394 ◽  
Author(s):  
R Palanivel ◽  
RF Laubscher ◽  
S Vigneshwaran ◽  
I Dinaharan
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Friction Stir Welding ◽  
Aluminum Alloys ◽  
Ultimate Tensile Strength ◽  
Design Of Experiments ◽  
Process Parameters ◽  
Welding Process ◽  
Friction Stir ◽  
Friction Stir Welding Process

Friction stir welding is a solid-state welding technique for joining metals such as aluminum alloys quickly and reliably. This article presents a design of experiments approach (central composite face–centered factorial design) for predicting and optimizing the process parameters of dissimilar friction stir welded AA6351–AA5083. Three weld parameters that influence weld quality were considered, namely, tool shoulder profile (flat grooved, partial impeller and full impeller), rotational speed and welding speed. Experimental results detailing the variation of the ultimate tensile strength as a function of the friction stir welding process parameters are presented and analyzed. An empirical model that relates the friction stir welding process parameters and the ultimate tensile strength was obtained by utilizing a design of experiments technique. The models developed were validated by an analysis of variance. In general, the full impeller shoulder profile displayed the best mechanical properties when compared to the other profiles. Electron backscatter diffraction maps were used to correlate the metallurgical properties of the dissimilar joints with the joint mechanical properties as obtained experimentally and subsequently modeled. The optimal friction stir welding process parameters, to maximize ultimate tensile strength, are identified and reported.

scholarly journals Effect of welding sequence and welding current on distortion, mechanical properties and metallurgical observations of orbital pipe welding on SS 316L

2021 ◽  
Vol 2 (12 (110)) ◽  
pp. 22-31
Author(s):  
Agus Widyianto ◽  
Ario Sunar Baskoro ◽  
Gandjar Kiswanto ◽  
Muhamad Fathin Ginanjar Ganeswara
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Ultimate Tensile Strength ◽  
Welding Process ◽  
Welding Current ◽  
Tensile Tests ◽  
Welding Parameters ◽  
Depth Of Penetration ◽  
Welding Sequence ◽  
Pipe Welding

Orbital pipe welding was often used to manufacture piping systems. In orbital pipe welding, a major challenge is the welding torch’s position during the welding process, so that additional methods are needed to overcome these challenges. This paper discusses the influence of welding sequence and welding current on distortion, mechanical properties and metallurgical observations in orbital pipe welding with SS 316L pipe square butt joints. The variation of the orbital pipe welding parameters used is welding current and welding sequence. The welding current used is 100 A, 110 A, and 120 A, while the welding sequence used is one sequence, two sequences, three sequences, and four sequences. The welding results will be analyzed from distortion measurement, mechanical properties test and metallurgical observations. Distortion measurements are made on the pipe before welding and after welding. Testing of mechanical properties includes tensile tests and microhardness tests, while metallurgical observations include macrostructure and microstructural observations. The results show that maximum axial distortion, transverse distortion, ovality, and taper occurred at a welding current of 120 A with four sequences of 445 µm, 300 µm, 195 µm, and 275 µm, respectively. The decrease in ultimate tensile strength is 51 % compared to the base metal’s ultimate tensile strength. Horizontal and vertical microhardness tests show that welding with one sequence produces the greatest microhardness value, but there is a decrease in the microhardness value using welding with two to four sequences. Orbital pipe welding results in different depths of penetration at each pipe position. The largest and smallest depth of penetration was 4.11 mm and 1.60 mm, respectively

scholarly journals The influence of welding speed on mechanical properties of friction stir welded joints of AA2024 T351 aluminum alloy

2020 ◽  
Vol 70 (2) ◽  
pp. 53-57
Author(s):  
Miodrag Milčić ◽  
Igor Radisavljević ◽  
Zijah Burzić ◽  
Ljubica Radović ◽  
Tomaž Vuherer ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Process Parameters ◽  
Welding Speed ◽  
Flat Surface ◽  
Hardness Measurement ◽  
Tensile Tests ◽  
Welding Parameters ◽  
Butt Joints ◽  
Friction Stir ◽  
Welding Direction

The aim of this study is to analyze how the process parameters affect the mechanical properties of butt joints obtained by friction stir welding (FSW). The experimental study was performed by the FSW of sheets having a thickness equal to 6 mm and made of aluminum alloys AA2024 T351, varying the process parameters, namely rotational speed and welding speed. The following welding parameters were used: the rotation speed of the tool did not change and amounted to 750 rpm, and the welding speed was 73, 116,150 mm / min. The welds were obtained without the presence of errors and with an acceptable flat surface of the compound. Tensile tests were performed orthogonally to the welding direction on specimens having the welding nugget placed in the middle of gage length. Vickers hardness measurement was conducted perpendicular to the welding direction, a cross-section of the weld joint. The hardness profiles were obtained along 3 horizontal and 63 vertical directions. Bend testing was carried out according to EN 910 The bending specimens were tested using face and root side of the joint in tension.

scholarly journals Peningkatan Kedalaman Penetrasi Las Stainless Steel 304 dengan Medan Magnet Eksternal pada Pengelasan Autogenous Tungsten Inert Gas Welding

2021 ◽  
Vol 12 (1) ◽  
pp. 87
Author(s):  
Haikal Haikal ◽  
Moch. Chamim ◽  
Deni Andriyansyah ◽  
Apri Wiyono ◽  
Ario Sunar Baskoro ◽  
...  
Keyword(s):  
Magnetic Field ◽  
External Magnetic Field ◽  
Welding Speed ◽  
Weld Line ◽  
Welding Process ◽  
Welding Current ◽  
Field Method ◽  
Inert Gas ◽  
Welding Parameters ◽  
Bead Width

<p class="Abstract">In this study, research on the use of the External Magnetic Field method – Tungsten Inert Gas was done to determine the effect of welding arc compression on the quality of <em>AISI 304 </em>thin plate weld. The welding process was performed using autogenous welds. In this study, an external magnetic field was generated by placing a magnetic solenoid around the <em>TIG</em> welding torch. Enabling this electromagnetic field is done dynamically using a microcontroller. Welding parameters used are welding current <em>100; 105; 110 A</em> and welding speed <em>1.6; 1.8; 2.05 mm/s</em>. The results of this study showed that <em>EMF-TIG</em> welding can produce a more uniform bead width along the weld line with a standard deviation of 0.08 compared with conventional <em>TIG </em>welding of <em>0.12</em>. Increased welding speed of  <em>2.05 mm/s</em> causes no effect on the addition of an external magnetic field to the width of the weld bead. The current parameters are <em>105 A </em>with a speed of <em>1.6; 1.8; 2.05 mm/s</em> resulted in compression of the top bead width by <em>0.87; 0.61; 0.1 mm</em>. The welding parameters with a current of 105 A and welding speed of <em>1.6 mm/s</em> have a larger upper bead compression effect of <em>0.84 mm</em> compared to <em>110 A</em> currents of <em>0.38 mm</em>. Moreover, the <em>D/W</em> ratio obtained under an external magnetic field was higher than without magnetic.</p>

scholarly journals Optimizing the Integrity of Linear Friction Welded Ti2AlNb Alloys

Metals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 802
Author(s):  
Xi Chen ◽  
Zhao Zhang ◽  
Faqin Xie ◽  
Xiangqing Wu ◽  
Tiejun Ma ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Process Parameters ◽  
Precipitation Hardening ◽  
Weld Zone ◽  
Aging Treatment ◽  
Weld Interface ◽  
Welding Parameters ◽  
Linear Friction ◽  
O Phase

The knowledge of process parameters–weld integrity-aging treatments–tensile property relationship is of great concern for linear friction welded (LFWed) Ti2AlNb-based alloy and requires a systematic characterization. Thus, the Ti2AlNb-based alloy was LFWed under various process parameters and then subjected to different aging treatments. Twelve welding conditions were used to evaluate the weld integrity, showing that impurities and cracks at weld interface can be eliminated under strong welding parameters and the feed rate has the greatest influence on the weld integrity among all process parameters. Relationships among aging temperatures, microstructure evolution, and mechanical properties were investigated. After aging treatment, acicular O phase has precipitated in B2 grains both in the weld zone and thermo-mechanical affected zone (TMAZ). The size of precipitated O phase increases along with the increase of temperature, and the α2 +·O mixtures have finally decomposed into the aggregated acicular O phase. The microhardness and tensile strength of the joints have been enhanced due to the precipitation hardening of O phase and refined grain strengthening after aging treatments.

Sign in / Sign up

Export Citation Format

Share Document