scholarly journals Evaluation of Calorific Value of Biomass Fuel and Waste Fuel

Netsu Bussei ◽  
2020 ◽  
Vol 34 (4) ◽  
pp. 147-153
Author(s):  
Shin-ichi Morita ◽  
Toshihiro Haniu ◽  
Takanobu Yamada ◽  
Kazunori Takai ◽  
Yasutaka Hayamizu ◽  
...  
Keyword(s):  
Calorific Value ◽  
Biomass Fuel

The Effect of Mixing Coal with Biomass in Solid Fuel Briquettes

2013 ◽  
Vol 856 ◽  
pp. 338-342 ◽  
Author(s):  
Chin Yee Sing ◽  
Mohd Shiraz Aris
Keyword(s):  
Mechanical Properties ◽  
Carbon Dioxide ◽  
Power Plants ◽  
Carbon Dioxide Emission ◽  
Palm Kernel ◽  
Value Added ◽  
Calorific Value ◽  
Fuel Properties ◽  
Biomass Fuel ◽  
Palm Kernel Shell

Burning fossil fuel like coal in power plants released carbon dioxide that had been absorbed millions of years ago. Unfortunately, excessive carbon dioxide emission had led to global warming. Malaysia, as one of the major exporters of palm oil, has abundant oil palm mill residues that could be converted into value-added product like biomass fuel briquettes. Fuel briquette with palm kernel shell and palm mesocarp fibre as its main ingredients showed satisfactory fuel characteristics and mechanical properties as a pure biomass fuel briquette. The effects of adding some coal of higher calorific value to the satisfactory biomass fuel briquette were focused in this study. Various coal-biomass fuel blends were used, ranging from 0wt% coal to 50wt% coal. The fuel properties and mechanical properties of pure biomass briquette and briquettes with different amount of coal added were compared experimentally. From the fuel properties tests, it was found that as the coal content in the briquette was increased, the carbon content and calorific value increased. Mechanical property tests on the fuel briquettes showed a mixture of results, with some favored higher portion of coal in the briquette for better handling, transport and storage properties while some favored greater amount of biomass.

Research on the Compression Mechanism of Densified Biomass Fuel

2014 ◽  
Vol 953-954 ◽  
pp. 195-198
Author(s):  
Xia Zhang ◽  
Zong Shou Cai ◽  
Li Hong Chen ◽  
Ying Chen
Keyword(s):  
Calorific Value ◽  
Biomass Fuel ◽  
Chemical Components ◽  
Compression Mechanism ◽  
The Common ◽  
Densified Biomass ◽  
Biomass Particles ◽  
And Storage ◽  
Comprehensive Study

By using mechanical force, biomass can be compressed or extruded into densified solid fuel with higher bulk density and higher calorific value, which makes it convenient in transportation and storage. The compressing technology of biomass is considered as one of the simplest and the most direct way to utilize biomass as a fuel in the world. However, due to the different chemical composition of biomass, the compression mechanism of biomass particles is different from other particles of coal, ceramics, metals and other materials. A comprehensive study on the compression mechanism of densified biomass fuel was carried out in this paper. The effects of the common chemical components of biomass on the quality of the densified fuel were further explored. The purpose of this paper is to provide a theoretical basis and a technical reference to understand the compression mechanism of biomass.

scholarly journals Characterization of Recycled Wood Chips, Syngas Yield, and Tar Formation in an Industrial Updraft Gasifier

Environments ◽  
2018 ◽  
Vol 5 (7) ◽  
pp. 84 ◽  
Author(s):  
Ehsan Oveisi ◽  
Shahab Sokhansanj ◽  
Anthony Lau ◽  
Jim Lim ◽  
Xiaotao Bi ◽  
...  
Keyword(s):  
Moisture Content ◽  
Wood Chip ◽  
Calorific Value ◽  
Operating Conditions ◽  
Wood Chips ◽  
Biomass Fuel ◽  
Fuel Moisture ◽  
Sampling Device ◽  
Fuel Particles ◽  
Fuel Moisture Content

In this study, the moisture content, calorific value, and particle size of recycled wood chips were measured. The wood chips were used to fuel an 8.5 MWth updraft gasifier to produce syngas for combustion in a steam-producing boiler. In-situ syngas composition and tar concentrations were measured and analyzed against biomass fuel properties. No efforts were made to adjust the properties of biomass or the routine operating conditions for the gasifier. A sampling device developed by CanmetENERGY-Ottawa (Ottawa, ON, Canada) was used to obtain syngas and tar samples. Wood chip samples fed to the gasifier were taken at the same time the gas was sampled. Results indicate that as the fuel moisture content increases from 20% to 35%, the production of CO drops along with a slight decrease in concentrations of H2 and CH4. Tar concentration increased slightly with increased moisture content and proportion of small fuel particles (3.15–6.3 mm). Based on the findings of this study, biomass fuel moisture content of 20% and particles larger than 6.3 mm (1/4″) are recommended for the industrial updraft gasifier in order to achieve a higher syngas quality and a lower tar concentration.

Study of the Kinetics of Thermal Destruction of Crossed Polyethylene

2019 ◽  
Vol 5 (12) ◽  
pp. 37-46
Author(s):  
K. Chalov ◽  
Yu. Lugovoy ◽  
Yu. Kosivtsov ◽  
E. Sulman
Keyword(s):  
Total Yield ◽  
Calorific Value ◽  
High Heat ◽  
Process Temperature ◽  
Optimum Process ◽  
Quantitative Composition ◽  
Pyrolysis Gas ◽  
Gaseous Products ◽  
Liquid Products ◽  
Kinetics Of

This paper presents a study of the process of thermal degradation of crosslinked polyethylene. The kinetics of polymer decomposition was studied by thermogravimetry. Crosslinked polyethylene showed high heat resistance to temperatures of 400 °C. The temperature range of 430–500 °C was determined for the loss of the bulk of the sample. According to thermogravimetric data, the decomposition process proceeds in a single stage and includes a large number of fracture, cyclization, dehydrogenation, and other reactions. The process of pyrolysis of a crosslinked polymer in a stationary-bed metal reactor was investigated. The influence of the process temperature on the yield of solid, liquid, and gaseous pyrolysis products was investigated. The optimum process temperature was 500 °C. At this temperature, the yield of liquid and gaseous products was 85.0 and 12.5% (mass.), Respectively. Samples of crosslinked polyester decomposed almost completely. The amount of carbon–containing residue was 3.5% by weight of the feedstock. With increasing temperature, the yield of liquid products decreased slightly and the yield of gaseous products increased, but their total yield did not increase. For gaseous products, a qualitative and quantitative composition was determined. The main components of the pyrolysis gas were hydrocarbons C1–C4. The calorific value of pyrolysis gas obtained at a temperature of 500 °C was 17 MJ/m3. Thus, the pyrolysis process can be used to process crosslinked polyethylene wastes to produce liquid hydrocarbons and combustible gases.

PROSPECTS OF OBTAINING ALTERNATIVE FUEL FROM VARIOUS BIOMASS AND WASTE SPECIES IN AZERBAIJAN

2019 ◽  
pp. 25-41
Author(s):  
O. M. Salamov ◽  
F. F. Aliyev
Keyword(s):  
Power Plants ◽  
Energy Intensity ◽  
Oil And Gas ◽  
Renewable Energy Sources ◽  
Calorific Value ◽  
High Energy ◽  
Energy Sector ◽  
Energy Sources ◽  
Mineral Fertilizers ◽  
Gaseous Fuels

The paper discusses the possibility of obtaining liquid and gaseous fuels from different types of biomass (BM) and combustible solid waste (CSW) of various origins. The available world reserves of traditional types of fuel are analyzed and a number of environmental shortcomings that created during their use are indicated. The tables present the data on the conditional calorific value (CCV) of the main traditional and alternative types of solid, liquid and gaseous fuels which compared with CCV of various types of BM and CSW. Possible methods for utilization of BM and CSW are analyzed, as well as the methods for converting them into alternative types of fuel, especially into combustible gases.Reliable information is given on the available oil and gas reserves in Azerbaijan. As a result of the research, it was revealed that the currently available oil reserves of Azerbaijan can completely dry out after 33.5 years, and gas reserves–after 117 years, without taking into account the growth rates of the exported part of these fuels to European countries. In order to fix this situation, first of all it is necessary to use as much as possible alternative and renewable energy sources, especially wind power plants (WPP) and solar photovoltaic energy sources (SFES) in the energy sector of the republic. Azerbaijan has large reserves of solar and wind energy. In addition, all regions of the country have large reserves of BM, and in the big cities, especially in industrial ones, there are CSW from which through pyrolysis and gasification is possible to obtain a high-quality combustible gas mixture, comprising: H2 + CO + CH4, with the least amount of harmful waste. The remains of the reaction of thermochemical decomposition of BM and CSW to combustible gases can also be used as mineral fertilizers in agriculture. The available and projected resources of Azerbaijan for the BM and the CSW are given, as well as their assumed energy intensity in the energy sector of the republic.Given the high energy intensity of the pyrolysis and gasification of the BM and CSW, at the present time for carrying out these reactions, the high-temperature solar installations with limited power are used as energy sources, and further preference is given to the use of WPP and SFES on industrial scale.

Energetic properties of peat saturated with petroleum products

2020 ◽  
Vol 13 (2) ◽  
pp. 105-109
Author(s):  
E. S. Dremicheva
Keyword(s):  
Crude Oil ◽  
Diesel Fuel ◽  
Energy Use ◽  
Experimental Studies ◽  
Calorific Value ◽  
Petroleum Products ◽  
Ash Content ◽  
Motor Oil ◽  
Initial Sample

This paper presents a method of sorption using peat for elimination of emergency spills of crude oil and petroleum products and the possibility of energy use of oil-saturated peat. The results of assessment of the sorbent capacity of peat are presented, with waste motor oil and diesel fuel chosen as petroleum products. Natural peat has been found to possess sorption properties in relation to petroleum products. The sorbent capacity of peat can be observed from the first minutes of contact with motor oil and diesel fuel, and significantly depends on their viscosity. For the evaluation of thermal properties of peat saturated with petroleum products, experimental studies have been conducted on determination of moisture and ash content of as-fired fuel. It is shown that adsorbed oil increases the moisture and ash content of peat in comparison with the initial sample. Therefore, when intended for energy use, peat saturated with petroleum products is to be subjected to additional drying. Simulation of net calorific value has been performed based on the calorific values of peat and petroleum products with different ratios of petroleum product content in peat and for a saturated peat sample. The obtained results are compared with those of experiments conducted in a calorimetric bomb and recalculated for net calorific value. A satisfactory discrepancy is obtained, which amounts to about 12%. Options have been considered providing for combustion of saturated peat as fuel (burnt per se and combined with a solid fuel) and processing it to produce liquid, gaseous and solid fuels. Peat can be used to solve environmental problems of elimination of emergency spills of crude oil and petroleum products and as an additional resource in solving the problem of finding affordable energy.

VALUE INCREASING OF REJECT COAL WITH BIOMASS ADDING AS BIO-COAL BRIQUETTE

2020 ◽  
Vol 3 (2) ◽  
pp. 123
Author(s):  
Dyah Marganingrum ◽  
Lenny Marilyn Estiaty
Keyword(s):  
Alternative Energy ◽  
Ignition Time ◽  
Bottom Ash ◽  
Calorific Value ◽  
Added Value ◽  
Physical Test ◽  
Chemical Test ◽  
Agglomeration Process ◽  
Strategic Solution ◽  
Index Value

Aim: This paper aims to explain the added value increasing method of reject coal which has not utilized by the company. Methodology and Results: The method to increase added value in this study used the agglomeration process of briquettes form that changing composition by adding biomass. The biomass functions to minimize bottom ash produced from burning briquettes so that the briquettes burn entirely. Stages processes in this study consist of characterization, briquetting, physical test, and chemical test. Based on the analysis, reject coal still has a high calorific value of 5,929 cal/gr. Shapes and sizes that were not following needs of coal market or consumer due to reject coal to be a waste. Briquettes have been successfully produced and meet specification requirements based on applicable regulations in Indonesia. Besides physical properties, the briquette meet density requirements which are greater than or equal to 1 gr/cm3 and shatter index value is less than 0.5%. The gas emission test shows below threshold, which is CO 0-30 ppm, H2S 0-3.6 ppm, and NOx is not detected. After evaluation, it showed that by adding 30% biomass, ignition time could be decreased and remaining unburned briquettes or bottom ash was reduced as much as 68.68%. Conclusion, significance and impact study: The bio-coal briquettes is a strategic solution to environmental problems and alternative energy sources that are environmentally friendly, because CO and H2S emissions are still below the threshold, even for NOx not detected. Making Bio-coal briquettes as a solution to the utilization of reject coal mining waste to be used as an alternative energy source has been successfully carried out.

Calorific Value of Coke 6. Increasing the Calorific Value

2020 ◽  
Vol 63 (8) ◽  
pp. 378-388
Author(s):  
I. V. Miroshnichenko ◽  
D. V. Miroshnichenko ◽  
I. V. Shulga
Keyword(s):  
Calorific Value
Sign in / Sign up

Export Citation Format

Share Document