Internal Check Valve Installation to Eliminate Well Integrity Issue

The life cycle of a production well was facing challenges related to well integrity issue where A-Annulus pressure tracking the tubing pressure and increased repeatedly above the Maximum Allowable Wellhead Operating Pressure (MAWOP). Several well control operations were executed to reduce A-Annulus abnormal pressure build-up (APB) with no success.Literature and well historical studies were performed in order to secure this well, normal bleed and lube was ruled out owing to several attempts already performed for more than a year, but the APB keep on appearing after 2-4 months. Bullheading is not a viable option to kill the well. Well securing planned and prepared with some options such as, mechanical barriers/plugs, cement plug or polymer plugs as temporary plug to avoid APB re-occurrence. There were some constrains in operation planning that need to be addressed carefully, with additional challenge of tight injectivity as if it was a closed system.The polymer plug successfully stops the gas migration to surface, and secured the well from any reoccurrences of APB. The details of well control histories, operation design and planning and operation execution with the complete results and evaluation will be presented in this paper.

Download Full-text

A Curious Case of Addressing Well Integrity Issue with Production Logging

10.2118/206036-ms ◽

2021 ◽

Author(s):

Gaurav Agrawal ◽

Ajit Kumar ◽

Vibhor Verma ◽

Alok Mishra ◽

Vikram Gualti ◽

...

Keyword(s):

Water Entry ◽

Entry Point ◽

Diagnostic Tools ◽

Complex Environments ◽

Well Integrity ◽

Cement Integrity ◽

Water Cut ◽

Challenging Situation ◽

Complex Scenario ◽

Integrity Issue

Abstract The productive life of a well can be affected by deterioration of the well integrity which can be due to casing/tubing corrosion, casing damage during drilling/ work over, packer failure, plug failures, cement integrity issues etc. Remedial measures can be executed if the nature of problem is diagnosed. One can receive early warning of a potential problem and obtain data for determining a specific restoration program by running well integrity diagnostic tools. There are various well integrity tools available to cater evaluation needs at present times with different working principles and targeting different well integrity problems such as casing/tubing and cement integrity. However, in challenging situation and complex environments, the tools may not provide complete diagnostics. Production logging can be an effective tool in such scenarios by mapping the flow behaviour in the wellbore and can provide a better idea of the wellbore problems. The well "A" is a development well which was drilled (max angle~ 27º) and completed in the interval X345-X349m and X362-X368m to exploit gas from the reservoir ABC. During initial testing it produced @ 1, 67,000 m3/d with FTHP of 2348psi. Later after acid job rate increased to 2,20,000 m3/d but later well had frequent water loading problem and required frequent activation / stimulation. The well has good reservoir zones as identified on the OH logs, hence, to diagnose the reason for water production, PLT was planned in the well in 2015. The well was producing 1,00,000 m3/d of gas at an FTHP of 1181psi during that time. Annulus pressure build-up was also observed in the well suggesting integrity issue with packer/tubing. During the PL run, it was observed that the packer has fallen and settled across one the perforation and the flow was observed to be ongoing from inside as well as outside the packer element making the flow interpretation tricky. A proper interpretation was carried out taking into consideration all available data and water entry point was confirmed. Based on the results, a well intervention was carried out and after the job, well started producing 1,50,000 m3/d of gas with 0% water cut whereas before it was producing 1,00,000 m3/d of gas with 1900 BPD of water. Thus, the intervention resulted in production enhancement by 50% and reduction in water cut by 100%. This paper highlights the proper analysis of the recorded data for diagnosis of the flow condition in an adverse and complex scenario and finding out the water entry point for a proper remediation of the well integrity and production issue.

Download Full-text

Lead Application to Cure Sap Wells by Deploying Straddle Packer, Success Story

10.2118/207840-ms ◽

2021 ◽

Author(s):

Abdelrahman Mohamed Gadelhak ◽

Mohamed Al-Badi ◽

Ahmed Al-Bairaq ◽

Eissa Al Mheiri ◽

Abdullah Haj Al-Hosani ◽

...

Keyword(s):

Integrity Test ◽

Gas Well ◽

Well Production ◽

Electric Line ◽

Well Integrity ◽

Anchoring System ◽

The Right ◽

Alternative Solutions ◽

Side Pocket ◽

Integrity Issue

Abstract Objective/Scope The Increase of inactive wells due to subsurface integrity issue is observed in brown fields, Fig-1 is, showing the record for onshore UAE asset, the economic challenges is calling for alternative solutions to restore well integrity with lower cost. Straddle packer application is consists of two tandom packers with spacer pipe in between with anchoring system deployed riglessly in the well to isolate the communication point between Ann A and Tubing.Fig-2, Methods, Procedures, Process Communication between tubing and annulus A (Failure of primary barrier) is identified as the right candidate wells for straddle packer application, First step is to clearly identify the point of communication, it has been done by annulus pressure investigation excersize during flowing and shut in condition, observing the return of annulus fluid which was the same produced gas Noise log has been conducted and clearly identified the communication point at SPM (Side Pocket Mandrel) to be used for emergency killing, Tubing integrity test was conducted using nippless plugs and inflow test below and above the leak point and confirm no other leak points within the tubing Engineering drawing for the leaking assembly was reviewed to design the dimension of straddle packer assembly, length and packer size It is recommended to deploy the assembly using electric line correlation for accurate depth selection After setting annulus pressure observed no build up Well opened safely to production Results/Observation/Conclusion Leak point arrested, well primary barrier restored Removed from DWS (drilling and workover schedule) and restore well production in addition to improving inactive string KPI for Gas asset Save almost work over cost for gas well XX-197 Novel/ Additive information The way forward is to check the scalability of extending this application among other ADNOC assets and to screen the right candidate wells for this application To add this application as a part of well integrity procedures and recommendations for such like cases

Download Full-text