A retrospective study of outcome of supracondylar osteotomy in correcting cubitus varus deformity

2020 ◽  
Vol 16 (3) ◽  
pp. 54-61
Author(s):  
Anwar Hamzath AK ◽  
Keyword(s):  
Retrospective Study ◽  
Varus Deformity ◽  
Cubitus Varus ◽  
Supracondylar Osteotomy

scholarly journals Prospective study of cubitus varus deformity, its etiopathology, clinical study and treatment

2016 ◽  
Vol 5 (1) ◽  
pp. 201
Author(s):  
Ulhas Dudhekar
Keyword(s):  
Varus Deformity ◽  
Age Group ◽  
Cubitus Varus ◽  
Supracondylar Fractures ◽  
Normal Range ◽  
Non Union ◽  
Functional Problem ◽  
Technical Details ◽  
Carrying Angle ◽  
Supracondylar Osteotomy

Background: Loss of carrying angle at elbow (Cubitus varus) remains one of the commonest complications of supracondylar fractures. Despite the numerous ways are described of treating supracondylar fractures, cubitus varus remains a significant problem. It can only be prevented by achieving and maintaining accurate reduction. Cubitus varus deformity is not a functional problem, but it may become so disfiguring that correction is indicated.Methods: A total of 10 cases of cubitus varus deformity were treated with modified French osteotomy outcome was measured with by the method of Oppenheim WL, Clader et al.Results: In this study 10 cases treated with modified French osteotomy. In the present study 70% cases were female. All the patients were in the age group of 6-13 years. The average correction of carrying angle was 5.7 0 of valgus. All the patients were having nearly normal range of motion of the affected elbow. Only one patient suffered radial nerve injury. There was no infection or hypertrophic scar or non-union. The study showed result in the form of excellent - 70%, Good - 20% and poor - 10%.Conclusions: Modified French method proved safe and satisfactory as it has improved anatomy and cosmetic results. Loss of correction of cubitus varus deformity does not occur. A proper cases selection and proper planning of osteotomy, attention to the technical details is crucial to the success of supracondylar osteotomy of the humerus for correction of cubitus varus.

Supracondylar Osteotomy of Humerus for Cubitus Varus Deformity

1991 ◽  
Vol 26 (6) ◽  
pp. 1820
Author(s):  
Myung Sang Moon ◽  
In Young Ok ◽  
Joon Taek Kong
Keyword(s):  
Varus Deformity ◽  
Cubitus Varus ◽  
Supracondylar Osteotomy

Supracondylar osteotomy for cubitus varus deformity in adult

1991 ◽  
Vol 4 (1) ◽  
pp. 22
Author(s):  
Ik Dong Kim ◽  
Poong Taek Kim ◽  
Byung Chul Park ◽  
Young Goo Lyu ◽  
Il Hyung Park ◽  
...  
Keyword(s):  
Varus Deformity ◽  
Cubitus Varus ◽  
Supracondylar Osteotomy

Supracondylar osteotomy to correct cubitus varus deformity of the humerus

1993 ◽  
Vol 28 (6) ◽  
pp. 2042
Author(s):  
Hyung Seok Kim ◽  
Ki Do Hong ◽  
Seong Sik Ha ◽  
Wan Kang ◽  
Kee Myun Lee
Keyword(s):  
Varus Deformity ◽  
Cubitus Varus ◽  
Supracondylar Osteotomy

scholarly journals Efficacy evaluation of three-dimensional printing assisted osteotomy guide plate in accurate osteotomy of adolescent cubitus varus deformity

2019 ◽  
Vol 14 (1) ◽  
Author(s):  
Yuan-Wei Zhang ◽  
Xin Xiao ◽  
Wen-Cheng Gao ◽  
Yan Xiao ◽  
Su-Li Zhang ◽  
...  
Keyword(s):  
3D Printing ◽  
Blood Loss ◽  
Three Dimensional ◽  
Operation Time ◽  
Varus Deformity ◽  
Conventional Group ◽  
Intraoperative Blood Loss ◽  
Cubitus Varus ◽  
Guide Plate ◽  
Significant Difference

Abstract Background This present study is aimed to retrospectively assess the efficacy of three-dimensional (3D) printing assisted osteotomy guide plate in accurate osteotomy of adolescent cubitus varus deformity. Material and methods Twenty-five patients (15 males and 10 females) with the cubitus varus deformity from June 2014 to December 2017 were included in this study and were enrolled into the conventional group (n = 11) and 3D printing group (n = 14) according to the different surgical approaches. The operation time, intraoperative blood loss, osteotomy degrees, osteotomy end union time, and postoperative complications between the two groups were observed and recorded. Results Compared with the conventional group, the 3D printing group has the advantages of shorter operation time, less intraoperative blood loss, higher rate of excellent correction, and higher rate of the parents’ excellent satisfaction with appearance after deformity correction (P < 0.001, P < 0.001, P = 0.019, P = 0.023). Nevertheless, no significant difference was presented in postoperative carrying angle of the deformed side and total complication rate between the two groups (P = 0.626, P = 0.371). Conclusions The operation assisted by 3D printing osteotomy guide plate to correct the adolescent cubitus varus deformity is feasible and effective, which might be an optional approach to promote the accurate osteotomy and optimize the efficacy.

scholarly journals An Innovative and Cost-Advantage CAD Solution for Cubitus Varus Surgical Planning in Children

2021 ◽  
Vol 11 (9) ◽  
pp. 4057
Author(s):  
Leonardo Frizziero ◽  
Gian Maria Santi ◽  
Christian Leon-Cardenas ◽  
Giampiero Donnici ◽  
Alfredo Liverani ◽  
...  
Keyword(s):  
Computer Aided Design ◽  
Low Cost ◽  
Cost Effective ◽  
Varus Deformity ◽  
Patient Specific ◽  
Cubitus Varus ◽  
Surgical Guide ◽  
Traditional Procedure ◽  
Custom Made ◽  
Patient Specific Instruments

The study of CAD (computer aided design) modeling, design and manufacturing techniques has undergone a rapid growth over the past decades. In medicine, this development mainly concerned the dental and maxillofacial sectors. Significant progress has also been made in orthopedics with pre-operative CAD simulations, printing of bone models and production of patient-specific instruments. However, the traditional procedure that formulates the surgical plan based exclusively on two-dimensional images and interventions performed without the aid of specific instruments for the patient and is currently the most used surgical technique. The production of custom-made tools for the patient, in fact, is often expensive and its use is limited to a few hospitals. The purpose of this study is to show an innovative and cost-effective procedure aimed at prototyping a custom-made surgical guide for address the cubitus varus deformity on a pediatric patient. The cutting guides were obtained through an additive manufacturing process that starts from the 3D digital model of the patient’s bone and allows to design specific models using Creo Parametric. The result is a tool that adheres perfectly to the patient’s bone and guides the surgeon during the osteotomy procedure. The low cost of the methodology described makes it worth noticing by any health institution.

Modified step-cut osteotomy for correction of post-traumatic cubitus varus deformity

2016 ◽  
Vol 25 (5) ◽  
pp. 424-428 ◽  
Author(s):  
Takehiko Takagi ◽  
Atsuhito Seki ◽  
Shinichiro Takayama ◽  
Masahiko Watanabe ◽  
Joji Mochida
Keyword(s):  
Varus Deformity ◽  
Cubitus Varus ◽  
Post Traumatic

Cubitus Varus Deformity Following Supracondylar Fractures of the Humerus in Children

1982 ◽  
Vol 2 (5) ◽  
pp. 539-546 ◽  
Author(s):  
Hubert Labelle ◽  
William P. Bunnell ◽  
Morris Duhaime ◽  
Benoit Poitras
Keyword(s):  
Varus Deformity ◽  
Cubitus Varus ◽  
Supracondylar Fractures
Sign in / Sign up

Export Citation Format

Share Document