Multiple Attenuation for the GlyVeST Seismic Data from the Faroes: An Integrated Workflow using Modeling and SRME

2009 ◽  
Author(s):  
Khanh Duc Nguyen ◽  
Brown James Robert
Keyword(s):  
Seismic Data ◽  
Multiple Attenuation

scholarly journals ATENUASI WATER-BOTTOM MULTIPLE DENGAN METODE TRANSFORMASI PARABOLIC RADON

2016 ◽  
Vol 12 (3) ◽  
pp. 145
Author(s):  
Subarsyah Subarsyah ◽  
Tumpal Benhard Nainggolan
Keyword(s):  
Radon Transform ◽  
Seismic Data ◽  
Wide Distribution ◽  
Seismic Section ◽  
Optimal Separation ◽  
Multiple Attenuation ◽  
Parabolic Radon Transform ◽  
Water Bottom

Interferensi water-bottom multipel terhadap reflektor primer menimbulkan efek bersifat destruktif yang menyebabkan penampang seismik menjadi tidak tepat akibat kehadiran reflektor semu. Teknik demultiple perlu diaplikasikan untuk mengatenuasi multipel. Transformasi parabolic radon merupakan teknik atenuasi multipel dengan metode pemisahan dalam domain radon. Multipel sering teridentifikasi pada penampang seismik. Untuk memperbaiki penampang seismik akan dilakukan dengan metode transformasi parabolic radon. Penerapan metode ini mengakibatkan reflektor multipel melemah dan tereduksi setelah dilakukan muting dalam domain radon terhadap zona multipel. Beberapa reflektor primer juga ikut melemah akibat pemisahan dalam domain radon yang kurang optimal, pemisahan akan optimal membutuhkan distribusi offset yang lebar. Kata kunci: Parabolic radon, multipel, atenuasi Water-bottom mutiple interference often destructively interfere with primary reflection that led to incorrect seismic section due to presence apparent reflector. Demultiple techniques need to be applied to attenuate the multiple. Parabolic Radon transform is demultiple attenuation technique that separate multiple and primary in radon domain. Water-bottom mutiple ussualy appear and easly identified on seismic data, parabolic radon transform applied to improve the seismic section. Application of this method to data showing multiple reflectors weakened and reduced after muting multiple zones in the radon domain. Some of the primary reflector also weakened due to bad separation in radon domain, optimal separation will require a wide distribution of offsets. Keywords: Parabolic radon, multiple, attenuation

scholarly journals Improving adaptive subtraction in seismic multiple attenuation

Geophysics ◽  
2009 ◽  
Vol 74 (4) ◽  
pp. V59-V67 ◽  
Author(s):  
Shoudong Huo ◽  
Yanghua Wang
Keyword(s):  
Least Squares ◽  
Seismic Data ◽  
Primary Energy ◽  
Multiple Models ◽  
Multiple Model ◽  
Data Set ◽  
Multiple Attenuation ◽  
Matching Filter ◽  
Theoretical Analyses ◽  
Different Order

In seismic multiple attenuation, once the multiple models have been built, the effectiveness of the processing depends on the subtraction step. Usually the primary energy is partially attenuated during the adaptive subtraction if an [Formula: see text]-norm matching filter is used to solve a least-squares problem. The expanded multichannel matching (EMCM) filter generally is effective, but conservative parameters adopted to preserve the primary could lead to some remaining multiples. We have managed to improve the multiple attenuation result through an iterative application of the EMCM filter to accumulate the effect of subtraction. A Butterworth-type masking filter based on the multiple model can be used to preserve most of the primary energy prior to subtraction, and then subtraction can be performed on the remaining part to better suppress the multiples without affecting the primaries. Meanwhile, subtraction can be performed according to the orders of the multiples, as a single subtraction window usually covers different-order multiples with different amplitudes. Theoretical analyses, and synthetic and real seismic data set demonstrations, proved that a combination of these three strategies is effective in improving the adaptive subtraction during seismic multiple attenuation.

An optimization of the inverse scattering multiple attenuation method for OBS and VC data

Geophysics ◽  
2002 ◽  
Vol 67 (4) ◽  
pp. 1293-1303 ◽  
Author(s):  
Luc T. Ikelle ◽  
Lasse Amundsen ◽  
Seung Yoo
Keyword(s):  
Free Surface ◽  
Data Storage ◽  
Inverse Scattering ◽  
Water Depth ◽  
Seismic Data ◽  
Computation Time ◽  
Ocean Bottom ◽  
Multiple Attenuation ◽  
Obs Data ◽  
Streamer Data

The inverse scattering multiple attenuation (ISMA) algorithm for ocean‐bottom seismic (OBS) data can be formulated in the form of a series expansion for each of the four components of OBS data. Besides the actual data, which constitute the first term of the series, each of the other terms is computed as a multidimensional convolution of OBS data with streamer data, and aims at removing one specific order of multiples. If the streamer data do not contain free‐surface multiples, we found that the computation of only the second term of the series is needed to predict and remove all orders of multiples, whatever the water depth. As the computation of the various terms of the series is the most expensive part of ISMA, this result can produce significant savings in computation time, even in data storage, as we no longer need to store the various terms of the series. For example, if the streamer data contained free‐surface multiples, OBS seismic data of 6‐s duration, corresponding to a geological model of the subsurface with 250‐m water depth, require the computation of five terms of the series for each of the four components of OBS data. With the new implementation, in which the streamer data do not contain free‐surface multiples, we need the computation of only one term of the series for each component of the OBS data. The saving in CPU time for this particular case is at least fourfold. The estimation of the inverse source signature, which is an essential part of ISMA, also benefits from the reduction of the number of terms needed for the demultiple to two because it becomes a linear inverse problem instead of a nonlinear one. Assuming that the removal of multiple events produces a significant reduction in the energy of the data, the optimization of this problem leads to a stable, noniterative analytic solution. We have also adapted these results to the implementation of ISMA for vertical‐cable (VC) data. This implementation is similar to that for OBS data. The key difference is that the basic model in VC imaging assumes that data consist of receiver ghosts of primaries instead of the primaries themselves. We have used the following property to achieve this goal. The combination of VC data with surface seismic data, which do not contain free‐surface multiples, allows us to predict free‐surface multiples and receiver ghosts as well as the receiver ghosts of primary reflections. However, if the direct wave arrivals are removed from the VC data, this combination will not predict the receiver ghosts of primary reflections. The difference between these two predictions produces data containing only receiver ghosts of primaries.

Memorial

2020 ◽  
Vol 39 (11) ◽  
pp. 839-839
Author(s):  
Enders Robinson ◽  
Tijmen Jan Moser
Keyword(s):  
Data Processing ◽  
Data Acquisition ◽  
Seismic Data ◽  
Digital Data ◽  
Multiple Attenuation ◽  
Digital Data Processing ◽  
Seismic Data Acquisition

Virgil Bardan was known for his contributions to seismic data acquisition and digital data processing related to inversion, sampling, and multiple attenuation. His numerous publications and erudite presentations, in a career that extended for more than 45 years, established him as a leader in exploration geophysics.

Surface‐related multiple elimination on land seismic data—Strategies via case studies

Geophysics ◽  
2000 ◽  
Vol 65 (3) ◽  
pp. 719-734 ◽  
Author(s):  
Panos G. Kelamis ◽  
D. J. Verschuur
Keyword(s):  
Case Studies ◽  
Seismic Data ◽  
Input Data ◽  
Multiple Attenuation ◽  
Processing Strategies ◽  
Processing Step ◽  
Subsequent Elimination ◽  
Seismic Amplitudes ◽  
Multiple Elimination

Three processing strategies for the estimation and subsequent elimination of surface‐related multiple energy on land seismic data are presented. They can be applied in a prestack mode (to shot and common‐midpoint gathers) or in a poststack mode. The algorithm for the multiple attenuation is based on wave theoretical principles in which the data are used as a prediction operator. The estimated multiples are then adaptively subtracted from the input data to obtain primary‐only data. A processing step prior to applying multiple elimination is an important component of these methodologies, particularly in the prestack analysis. Its aim is to regularize the data, improve the S/N ratio, and balance the seismic amplitudes. This results in smooth prediction operators. The effectiveness of these schemes in suppressing multiples is demonstrated with a number of case studies involving processing land seismic data.

scholarly journals Practical Implementation of Multiple Attenuation Methods on 2D Deepwater Seismic Data : Seram Sea Case Study

2017 ◽  
Vol 32 (1) ◽  
Author(s):  
Tumpal Bernhard Nainggolan ◽  
Deny Setiady
Keyword(s):  
Seismic Data ◽  
Input Data ◽  
Complex Structure ◽  
Least Square ◽  
Inversion Method ◽  
Practical Implementation ◽  
Proper Solution ◽  
Multiple Attenuation ◽  
Multiple Elimination ◽  
Water Bottom

Some deepwater multiple attenuation processing methods have been developed in the past with partial success. The success of surface multiple attenuation relies on good water bottom reflections for most deepwater marine situations. It brings the bigger ability to build an accurate water bottom multiple prediction model. Major challenges on 2D deepwater seismic data processing especially such a geologically complex structure of Seram Sea, West Papua – Indonesia are to attenuate surface related multiple and to preserve the primary data. Many multiple attenuation methods have been developed to remove surface multiple on these seismic data including most common least-squares, prediction-error filtering and more advanced Radon transform.Predictive Deconvolution and Surface Related Multiple Elimination (SRME) method appears to be a proper solution, especially in complex structure where the above methods fail to distinguish interval velocity difference between primaries and multiples. It does not require any subsurface info as long as source signature and surface reflectivity are provided. SRME method consists of 3 major steps: SRME regularization, multiple modeling and least-square adaptive subtraction. Near offset regularization is needed to fill the gaps on near offset due to unrecorded near traces during the acquisition process. Then, isolating primaries from multiples using forward modeling. Inversion method by subtraction of input data with multiple models to a more attenuated multiple seismic section.Results on real 2D deepwater seismic data show that SRME method as the proper solution should be considered as one of the practical implementation steps in geologically complex structure and to give more accurate seismic imaging for the interpretation.Keywords : multiple attenuation, 2D deepwater seismic, Radon transform, Surface Related Multiple Elimination (SRME). Banyak metode atenuasi pengulangan ganda dikembangkan pada pengolahan data seismik dengan tingkat keberhasilan yang rendah pada masa lalu. Keberhasilan dalam atenuasi pengulangan ganda permukaan salah satunya bergantung pada hasil gelombang pantul pada batas dasar laut dan permukaan pada hampir seluruh survei seismik laut. Hal tersebut menentukan keakuratan dalam membuat model prediksi pengulangan ganda dasar laut dan permukaan air. Tantangan utama dalam pemrosesan data seismik 2D laut dalam khususnya struktur geologi kompleks seperti Laut Seram, Papua Barat – Indonesia adalah pada kegiatan menekan pengulangan ganda permukaan sekaligus mempertahankan data primer. Beberapa metode yang dikembangkan untuk menghilangkan pengulangan ganda permukaan pada data seismik seperti least-square, filter prediksi kesalahan dan transformasi Radon.Dekonvolusi Prediktif dan Metode Surface Related Multiple Elimination (SRME) digunakan sebagai solusi yang baik pada struktur kompleks dimana metode-metode lain gagal untuk memisahkan perbedaan kecepatan interval data primer dan pengulangan ganda. Metode tersebut tidak membutuhkan informasi bawah permukaan selain parameter sumber dan reflektivitas permukaan. Metode SRME terdiri dari 3 tahapan utama : regularisasi SRME, pemodelan pengulangan ganda dan pengurangan adaktif least-square. Regularisasi near offset diperlukan untuk mengisi kekosongan pada near offset yang disebabkan oleh adanya sejumlah tras terdekat yang tidak terekam selama akuisisi. Pemodelan maju digunakan untuk memisahkan data primer dan pengulangan ganda kemudian inversi dengan pengurangan input data dengan model multiple.Hasil pada data seismik 2D laut dalam menunjukkan bahwa metode SRME layak diterapkan sebagai salah satu pengembangan metode atenuasi multiple permukaan serta untuk meningkatkan akurasi data seismik terutama untuk struktur geologi kompleks.Kata kunci : peredaman pengulangan ganda (multiple), seismik 2D laut dalam, transformasi Radon, Surface Related Multiple Attenuation (SRME).

Multiple attenuation with 3D high-order high-resolution parabolic Radon transform using lower frequency constraints

Geophysics ◽  
2020 ◽  
Vol 85 (3) ◽  
pp. V317-V328
Author(s):  
Jitao Ma ◽  
Guoyang Xu ◽  
Xiaohong Chen ◽  
Xiaoliu Wang ◽  
Zhenjiang Hao
Keyword(s):  
High Resolution ◽  
Radon Transform ◽  
Seismic Data ◽  
Computational Cost ◽  
Real Data ◽  
Multiple Model ◽  
Multiple Attenuation ◽  
Common Depth Point ◽  
Frequency Constraint ◽  
Parabolic Radon Transform

The parabolic Radon transform is one of the most commonly used multiple attenuation methods in seismic data processing. The 2D Radon transform cannot consider the azimuth effect on seismic data when processing 3D common-depth point gathers; hence, the result of applying this transform is unreliable. Therefore, the 3D Radon transform should be applied. The theory of the 3D Radon transform is first introduced. To address sparse sampling in the crossline direction, a lower frequency constraint is introduced to reduce spatial aliasing and improve the resolution of the Radon transform. An orthogonal polynomial transform, which can fit the amplitude variations in different parabolic directions, is combined with the dealiased 3D high-resolution Radon transform to account for the amplitude variations with offset of seismic data. A multiple model can be estimated with superior accuracy, and improved results can be achieved. Synthetic and real data examples indicate that even though our method comes at a higher computational cost than existing techniques, the developed approach provides better attenuation of multiples for 3D seismic data with amplitude variations.

The Role of Legacy Seismic in Enhancing the Image in the Current Seismic Data – Abu Dhabi: Case Study

2021 ◽  
Author(s):  
Ramy Elasrag ◽  
Thuraya Al Ghafri ◽  
Faaeza Al Katheer ◽  
Yousuf Al-Aufi ◽  
Ivica Mihaljevic ◽  
...  
Keyword(s):  
Seismic Data ◽  
Seismic Survey ◽  
Surface Model ◽  
Noise Attenuation ◽  
Near Surface ◽  
Velocity Models ◽  
Multiple Attenuation ◽  
Seismic Image ◽  
Seismic Acquisition

Abstract Acquiring surface seismic data can be challenging in areas of intense human activities, due to presence of infrastructures (roads, houses, rigs), often leaving large gaps in the fold of coverage that can span over several kilometers. Modern interpolation algorithms can interpolate up to a certain extent, but quality of reconstructed seismic data diminishes as the acquisition gap increases. This is where vintage seismic acquisition can aid processing and imaging, especially if previous acquisition did not face the same surface obstacles. In this paper we will present how the legacy seismic survey has helped to fill in the data gaps of the new acquisition and produced improved seismic image. The new acquisition survey is part of the Mega 3D onshore effort undertaken by ADNOC, characterized by dense shot and receiver spacing with focus on full azimuth and broadband. Due to surface infrastructures, data could not be completely acquired leaving sizable gap in the target area. However, a legacy seismic acquisition undertaken in 2014 had access to such gap zones, as infrastructures were not present at the time. Legacy seismic data has been previously processed and imaged, however simple post-imaging merge would not be adequate as two datasets were processed using different workflows and imaging was done using different velocity models. In order to synchronize the two datasets, we have processed them in parallel. Data matching and merging were done before regularization. It has been regularized to radial geometry using 5D Matching Pursuit with Fourier Interpolation (MPFI). This has provided 12 well sampled azimuth sectors that went through surface consistent processing, multiple attenuation, and residual noise attenuation. Near surface model was built using data-driven image-based static (DIBS) while reflection tomography was used to build the anisotropic velocity model. Imaging was done using Pre-Stack Kirchhoff Depth Migration. Processing legacy survey from the beginning has helped to improve signal to noise ratio which assisted with data merging to not degrade the quality of the end image. Building one near surface model allowed both datasets to match well in time domain. Bringing datasets to the same level was an important condition before matching and merging. Amplitude and phase analysis have shown that both surveys are aligned quite well with minimal difference. Only the portion of the legacy survey that covers the gap was used in the regularization, allowing MPFI to reconstruct missing data. Regularized data went through surface multiple attenuation and further noise attenuation as preconditioning for migration. Final image that is created using both datasets has allowed target to be imaged better.

Sign in / Sign up

Export Citation Format

Share Document