Free‐surface multiple attenuation of 3D multi‐offset seismic data

1998 ◽  
Author(s):  
Luc T. Ikelle ◽  
Zhiqiang Guo
Keyword(s):  
Free Surface ◽  
Seismic Data ◽  
Multiple Attenuation

An optimization of the inverse scattering multiple attenuation method for OBS and VC data

Geophysics ◽  
2002 ◽  
Vol 67 (4) ◽  
pp. 1293-1303 ◽  
Author(s):  
Luc T. Ikelle ◽  
Lasse Amundsen ◽  
Seung Yoo
Keyword(s):  
Free Surface ◽  
Data Storage ◽  
Inverse Scattering ◽  
Water Depth ◽  
Seismic Data ◽  
Computation Time ◽  
Ocean Bottom ◽  
Multiple Attenuation ◽  
Obs Data ◽  
Streamer Data

The inverse scattering multiple attenuation (ISMA) algorithm for ocean‐bottom seismic (OBS) data can be formulated in the form of a series expansion for each of the four components of OBS data. Besides the actual data, which constitute the first term of the series, each of the other terms is computed as a multidimensional convolution of OBS data with streamer data, and aims at removing one specific order of multiples. If the streamer data do not contain free‐surface multiples, we found that the computation of only the second term of the series is needed to predict and remove all orders of multiples, whatever the water depth. As the computation of the various terms of the series is the most expensive part of ISMA, this result can produce significant savings in computation time, even in data storage, as we no longer need to store the various terms of the series. For example, if the streamer data contained free‐surface multiples, OBS seismic data of 6‐s duration, corresponding to a geological model of the subsurface with 250‐m water depth, require the computation of five terms of the series for each of the four components of OBS data. With the new implementation, in which the streamer data do not contain free‐surface multiples, we need the computation of only one term of the series for each component of the OBS data. The saving in CPU time for this particular case is at least fourfold. The estimation of the inverse source signature, which is an essential part of ISMA, also benefits from the reduction of the number of terms needed for the demultiple to two because it becomes a linear inverse problem instead of a nonlinear one. Assuming that the removal of multiple events produces a significant reduction in the energy of the data, the optimization of this problem leads to a stable, noniterative analytic solution. We have also adapted these results to the implementation of ISMA for vertical‐cable (VC) data. This implementation is similar to that for OBS data. The key difference is that the basic model in VC imaging assumes that data consist of receiver ghosts of primaries instead of the primaries themselves. We have used the following property to achieve this goal. The combination of VC data with surface seismic data, which do not contain free‐surface multiples, allows us to predict free‐surface multiples and receiver ghosts as well as the receiver ghosts of primary reflections. However, if the direct wave arrivals are removed from the VC data, this combination will not predict the receiver ghosts of primary reflections. The difference between these two predictions produces data containing only receiver ghosts of primaries.

Using even terms of the scattering series for deghosting and multiple attenuation of ocean‐bottom cable data

Geophysics ◽  
1999 ◽  
Vol 64 (2) ◽  
pp. 579-592 ◽  
Author(s):  
Luc T. Ikelle
Keyword(s):  
Free Surface ◽  
Seismic Data ◽  
Primary Energy ◽  
Ocean Bottom ◽  
Receiver Side ◽  
Direct Wave ◽  
Sea Floor ◽  
Multiple Attenuation ◽  
Marine Surface ◽  
Streamer Data

Inverse scattering multiple attenuation (ISMA) is a method of removing free‐surface multiple energy while preserving primary energy. The other key feature of ISMA is that no knowledge of the subsurface is required in its application. I have adapted this method to multicomponent ocean‐bottom cable data (i.e., to arrays of sea‐floor geophones and hydrophones) by selecting a subseries made of even terms of the current scattering series used in the free‐surface multiple attenuation of conventional marine surface seismic data (streamer data). This subseries approach allows me to remove receiver ghosts (receiver‐side reverberations) and free‐surface multiples (source‐side reverberations) in multicomponent OBC data. I have processed each component separately. As for the streamer case, my OBC version of ISMA preserves primary energy and does not require any knowledge of the subsurface. Moreover, the preprocessing steps of muting for the direct wave and interpolating for missing near offsets are no longer needed. Knowledge of the source signature is still required. The existing ways of satisfying this requirement for streamer data can be used for OBC data without modification. This method differs from the present dual‐field deghosting method used in OBC data processing in that it does not assume a horizontally flat sea floor; nor does it require the knowledge of the acoustic impedance below the sea floor. Furthermore, it attenuates all free‐surface multiples, including receiver ghosts and source‐side reverberations.

Free-surface multiple attenuation in ultrashallow water: A case study with broadband processed 1-C 3D seismic data

2017 ◽  
Author(s):  
Abhishek Raj ◽  
Jarred Hostetler ◽  
Clement Kostov ◽  
Lenar Nasipov ◽  
Frederico Xavier de Melo ◽  
...  
Keyword(s):  
Free Surface ◽  
Seismic Data ◽  
3D Seismic ◽  
Multiple Attenuation ◽  
3D Seismic Data

Attenuating primaries and free‐surface multiples of vertical cable (VC) data while preserving receiver ghosts of primaries

Geophysics ◽  
2001 ◽  
Vol 66 (3) ◽  
pp. 953-963 ◽  
Author(s):  
Luc T. Ikelle
Keyword(s):  
Free Surface ◽  
Seismic Data ◽  
Ocean Bottom ◽  
Direct Wave ◽  
Sea Floor ◽  
Multiple Attenuation ◽  
Wavefield Separation ◽  
Internal Multiples ◽  
Streamer Data ◽  
Imaging Algorithms

Marine vertical cable (VC) data contain primaries, receiver ghosts, free‐surface multiples, and internal multiples just like towed‐streamer data. However, the imaging of towed‐streamer data is based on primary reflections, while the emerging imaging algorithms of VC data tend to use the receiver ghosts of primary reflections instead of the primaries themselves. I present an algorithm for attenuating primaries, free‐surface multiples, and the receiver ghosts of free‐surface multiples while preserving the receiver ghosts of primaries. My multiple attenuation algorithm of VC data is based on an inverse scattering approach known, which is a predict‐then‐subtract method. It assumes that surface seismic data are available or that they can be computed from VC data after an up/down wavefield separation at the receiver locations (streamer data add to VC data some of the wave paths needed for multiple attenuation). The combination of surface seismic data with VC data allows one to predict free‐surface multiples and receiver ghosts as well as the receiver ghosts of primary reflections. However, if the direct wave arrivals are removed from the VC data, this combination will not predict the receiver ghosts of primary reflections. I use this property to attenuate primaries, free‐surface multiples, and receiver ghosts from VC data, preserving only the receiver ghosts of primaries. This method can be used for multicomponent ocean bottom cable data (i.e., arrays of sea‐floor geophones and hydrophones) without any modification to attenuate primaries, free‐surface multiples, and the receiver ghosts of free‐surface multiples while preserving the receiver ghosts of primaries.

Free-surface multiple attenuation for blended data

Geophysics ◽  
2016 ◽  
Vol 81 (3) ◽  
pp. V227-V233
Author(s):  
Jitao Ma ◽  
Xiaohong Chen ◽  
Mrinal K. Sen ◽  
Yaru Xue
Keyword(s):  
Free Surface ◽  
Seismic Data ◽  
Synthetic Data ◽  
Primary Energy ◽  
Inversion Method ◽  
Inversion Algorithm ◽  
Crosstalk Noise ◽  
Multiple Attenuation ◽  
Blended Data ◽  
Value Decomposition

Blended data sets are now being acquired because of improved efficiency and reduction in cost compared with conventional seismic data acquisition. We have developed two methods for blended data free-surface multiple attenuation. The first method is based on an extension of surface-related multiple elimination (SRME) theory, in which free-surface multiples of the blended data can be predicted by a multidimensional convolution of the seismic data with the inverse of the blending operator. A least-squares inversion method is used, which indicates that crosstalk noise existed in the prediction result due to the approximate inversion. An adaptive subtraction procedure similar to that used in conventional SRME is then applied to obtain the blended primary — this can damage the energy of primaries. The second method is based on inverse data processing (IDP) theory adapted to blended data. We derived a formula similar to that used in conventional IDP, and we attenuated free-surface multiples by simple muting of the focused points in the inverse data space (IDS). The location of the focused points in the IDS for blended data, which can be calculated, is also related to the blending operator. We chose a singular value decomposition-based inversion algorithm to stabilize the inversion in the IDP method. The advantage of IDP compared with SRME is that, it does not have crosstalk noise and is able to better preserve the primary energy. The outputs of our methods are all blended primaries, and they can be further processed using blended data-based algorithms. Synthetic data examples show that the SRME and IDP algorithms for blended data are successful in attenuating free-surface multiples.

scholarly journals ATENUASI WATER-BOTTOM MULTIPLE DENGAN METODE TRANSFORMASI PARABOLIC RADON

2016 ◽  
Vol 12 (3) ◽  
pp. 145
Author(s):  
Subarsyah Subarsyah ◽  
Tumpal Benhard Nainggolan
Keyword(s):  
Radon Transform ◽  
Seismic Data ◽  
Wide Distribution ◽  
Seismic Section ◽  
Optimal Separation ◽  
Multiple Attenuation ◽  
Parabolic Radon Transform ◽  
Water Bottom

Interferensi water-bottom multipel terhadap reflektor primer menimbulkan efek bersifat destruktif yang menyebabkan penampang seismik menjadi tidak tepat akibat kehadiran reflektor semu. Teknik demultiple perlu diaplikasikan untuk mengatenuasi multipel. Transformasi parabolic radon merupakan teknik atenuasi multipel dengan metode pemisahan dalam domain radon. Multipel sering teridentifikasi pada penampang seismik. Untuk memperbaiki penampang seismik akan dilakukan dengan metode transformasi parabolic radon. Penerapan metode ini mengakibatkan reflektor multipel melemah dan tereduksi setelah dilakukan muting dalam domain radon terhadap zona multipel. Beberapa reflektor primer juga ikut melemah akibat pemisahan dalam domain radon yang kurang optimal, pemisahan akan optimal membutuhkan distribusi offset yang lebar. Kata kunci: Parabolic radon, multipel, atenuasi Water-bottom mutiple interference often destructively interfere with primary reflection that led to incorrect seismic section due to presence apparent reflector. Demultiple techniques need to be applied to attenuate the multiple. Parabolic Radon transform is demultiple attenuation technique that separate multiple and primary in radon domain. Water-bottom mutiple ussualy appear and easly identified on seismic data, parabolic radon transform applied to improve the seismic section. Application of this method to data showing multiple reflectors weakened and reduced after muting multiple zones in the radon domain. Some of the primary reflector also weakened due to bad separation in radon domain, optimal separation will require a wide distribution of offsets. Keywords: Parabolic radon, multiple, attenuation

scholarly journals Improving adaptive subtraction in seismic multiple attenuation

Geophysics ◽  
2009 ◽  
Vol 74 (4) ◽  
pp. V59-V67 ◽  
Author(s):  
Shoudong Huo ◽  
Yanghua Wang
Keyword(s):  
Least Squares ◽  
Seismic Data ◽  
Primary Energy ◽  
Multiple Models ◽  
Multiple Model ◽  
Data Set ◽  
Multiple Attenuation ◽  
Matching Filter ◽  
Theoretical Analyses ◽  
Different Order

In seismic multiple attenuation, once the multiple models have been built, the effectiveness of the processing depends on the subtraction step. Usually the primary energy is partially attenuated during the adaptive subtraction if an [Formula: see text]-norm matching filter is used to solve a least-squares problem. The expanded multichannel matching (EMCM) filter generally is effective, but conservative parameters adopted to preserve the primary could lead to some remaining multiples. We have managed to improve the multiple attenuation result through an iterative application of the EMCM filter to accumulate the effect of subtraction. A Butterworth-type masking filter based on the multiple model can be used to preserve most of the primary energy prior to subtraction, and then subtraction can be performed on the remaining part to better suppress the multiples without affecting the primaries. Meanwhile, subtraction can be performed according to the orders of the multiples, as a single subtraction window usually covers different-order multiples with different amplitudes. Theoretical analyses, and synthetic and real seismic data set demonstrations, proved that a combination of these three strategies is effective in improving the adaptive subtraction during seismic multiple attenuation.

Sign in / Sign up

Export Citation Format

Share Document