The Application of In-fissure Divert Fracturing Technology in Ultra-low Permeability Oil Field

2009 ◽  
Author(s):  
Zhenyun Song ◽  
Xiaowen Wang ◽  
Yanpeng Ren ◽  
Yong Li ◽  
Weishi Zheng
Keyword(s):  
Oil Field ◽  
Low Permeability

Geomechanical aspects of induced microseismicity during CO2 injection in Illinois Basin

2021 ◽  
Vol 40 (11) ◽  
pp. 823-830
Author(s):  
Nikita Bondarenko ◽  
Sherilyn Williams-Stroud ◽  
Jared Freiburg ◽  
Roman Makhnenko
Keyword(s):  
Oil Field ◽  
Co2 Injection ◽  
Low Permeability ◽  
Illinois Basin ◽  
Petrographic Analysis ◽  
Flow Properties ◽  
Geomechanical Characterization ◽  
Fluid Penetration ◽  
Geophysical Log

Carbon sequestration activities are increasing in a global effort to mitigate the effects of greenhouse gas emissions on the climate. Injection of wastewater and oil-field fluids is known to induce seismic activity. This makes it important to understand how that risk relates to CO2 injection. Injection of supercritical CO2 into the Cambrian Mt. Simon sandstone in Illinois Basin induced microseismicity that was observed below the reservoir, primarily in the Precambrian crystalline basement. Geomechanical and flow properties of rock samples from the involved formations were measured in the laboratory and compared with geophysical log data and petrographic analysis. The controlling factors for induced microseismicity in the basement seem to be the hydraulic connection between the reservoir and basement rock and reactivation of pre-existing faults or fractures in the basement. Additionally, the presence of a laterally continuous low-permeability layer between reservoir and basement may have prevented downward migration of pore pressure and reactivation of critically stressed planes of weakness in the basement. Results of the geomechanical characterization of this intermediate layer indicate that it may act as an effective barrier for fluid penetration into the basement and that induced microseismicity is likely to be controlled by the pre-existing system of faults. This is because the intact material is not expected to fail under the reservoir stress conditions.

GEOLOGY OF BARROW ISLAND OIL FIELD

1973 ◽  
Vol 13 (1) ◽  
pp. 49 ◽  
Author(s):  
Keith Crank
Keyword(s):  
Oil And Gas ◽  
Water Injection ◽  
Water Source ◽  
Upper Jurassic ◽  
Oil Field ◽  
Late Triassic ◽  
Low Permeability ◽  
High Porosity ◽  
The South ◽  
The North

The Barrow Island oil field, which was discovered by the drilling of Barrow 1 in 1964, was declared commercial in 1966. Since then 520 wells have been drilled in the development of this field which has resulted in 309 Windalia Sand oil producers (from about 2200 feet), eight Muderong Greensand oil wells (2800 feet), five Neocomian/Upper Jurassic gas and oil producers (6200 to 6700 feet), eight Barrow Group water source wells and 157 water injection wells.Production averages 41,200 barrels of oil per day, and 98% of this comes from the shallow Windalia Sand Member of Cretaceous (Aptian to Albian) age. These reserves are contained in a broad north-plunging nose truncated to the south by a major down-to-the-south fault. The anticline is thought to have been formed initially from a basement uplift during Late Triassic to Early Jurassic time. Subsequent periods of deposition, uplift and erosion have continued into the Tertiary and modified the structure to its present form. The known sedimentary section on Barrow Island ranges from Late Jurassic to Miocene.The Neocomian/Jurassic accumulations are small and irregular and are not thought to be commercial in themselves. The Muderong Greensand pool is also a limited, low permeability reservoir. Migration of hydrocarbons is thought to have occurred mainly in the Tertiary as major arching did not take place until very late in the Cretaceous or early in the Palaeocene.The Windalia Sand reservoir is a high porosity, low permeability sand which is found only on Barrow Island. One of the most unusual features of this reservoir is the presence of a perched gas cap. Apparently the entire sand was originally saturated with oil, and gas subsequently moved upstructure from the north, displacing it. This movement was probably obstructed by randomly-located permeability barriers.

Leak-Off Coefficient Analysis in Stimulation Treatment Design

2014 ◽  
Vol 933 ◽  
pp. 202-205
Author(s):  
Bo Cai ◽  
Yun Hong Ding ◽  
Yong Jun Lu ◽  
Chun Ming He ◽  
Gui Fu Duan
Keyword(s):  
Hydraulic Fracturing ◽  
Field Method ◽  
Oil Field ◽  
Low Permeability ◽  
Analysis Model ◽  
Fracturing Fluid ◽  
Real Time Analysis ◽  
Fracturing Fluids ◽  
Common Technique ◽  
Treatment Design

Hydraulic fracturing was first used in the late 1940s and has become a common technique to enhance the production of low-permeability formations.Hydraulic fracturing treatments were pumped into permeable formations with permeable fluids. This means that as the fracturing fluid was being pumped into the formation, a certain proportion of this fluid will being lost into formation as fluid leak-off. Therefore, leak-off coefficient is the most leading parameters of fracturing fluids. The accurate understanding of leak-off coefficient of fracturing fluid is an important guidance to hydraulic fracturing industry design. In this paper, a new field method of leak-off coefficient real time analysis model was presented based on instantaneous shut-in pressure (ISIP). More than 100 wells were fractured using this method in oil field. The results show that average liquid rates of post-fracturing was 22m3/d which double improvement compared with the past treatment wells. It had an important role for hydraulic fracturing stimulation treatment design in low permeability reservoirs and was proven that the new model for hydraulic fracturing treatment is greatly improved.

The Key Technology Research of the Water Injection System Energy Saving for Super Low Permeability Reservoir in Changqing Oil Field

2012 ◽  
Vol 524-527 ◽  
pp. 1217-1222 ◽  
Author(s):  
Zhi Qiang Huang ◽  
Zhen Chen ◽  
Gang Zheng ◽  
Jian Qiang Xue ◽  
Xue Yuan Li
Keyword(s):  
Energy Consumption ◽  
Energy Saving ◽  
Large Scale ◽  
Water Injection ◽  
High Energy ◽  
Economic Benefits ◽  
Oil Field ◽  
Injection System ◽  
Low Permeability ◽  
Load Rate

With the characteristics of low permeability, pressure and abundance, it's extremely hard to exploit the super low permeability reservoirs in ChangQing oil field. For this reason, the water injection recovery technique has been widely used. Analysis showed that a serious problem of high energy consumption exist in the water injection system, the power consumption of which accounts for about 44%. And the energy cost of pump units reach up to 43%, it's the highest energy consumption link in the system. In this paper the load rate classification method (LRCM) is firstly adopted to statistical analyze water injection stations, which are divided into the owing and over load rate stations. As a result, the owing load rate stations accounts for 83.8%, with a serious phenomenon of the Big Horse Pull A Small Carriage, causing the large-scale backflow in the station, and the efficiency is low, the energy consumption is on the high side. Aimed at water injection stations with different load rate, the methods of reasonable shutting down the pumps, pump replacement, optimizing the transmission ratio and piston size, as well as the speed control technology have been used to make the outlet flow and actual demand reasonable matching. The test result shows that the energy saving technology is well targeted, simple, practical and low cost. The pump units’ efficiency improves obviously, the consumption reduces by 10%, which greatly improve the oilfield economic benefits.

Slimhole Drilling Cuts Development Costs of Low Permeability Oil Field With Great Margin

2000 ◽  
Author(s):  
Fengmin Zhang ◽  
Jie Dong ◽  
Yueming Cui ◽  
Li Wang
Keyword(s):  
Oil Field ◽  
Low Permeability ◽  
Development Costs

scholarly journals Research on Property of Multicomponent Thickening Water Fracturing Fluid and Application in Low Permeability Oil Reservoirs

2018 ◽  
Vol 2018 ◽  
pp. 1-10 ◽  
Author(s):  
Chengli Zhang ◽  
Peng Wang ◽  
Guoliang Song
Keyword(s):  
Guar Gum ◽  
New Technology ◽  
Oil Field ◽  
Ammonium Bromide ◽  
Low Permeability ◽  
Fracturing Fluid ◽  
Fluid System ◽  
Fracture Conductivity ◽  
Hydroxypropyl Guar ◽  
Actual Production

The clean fracturing fluid, thickening water, is a new technology product, which promotes the advantages of clean fracturing fluid to the greatest extent and makes up for the deficiency of clean fracturing fluid. And it is a supplement to the low permeability reservoir in fracturing research. In this paper, the study on property evaluation for the new multicomponent and recoverable thickening fracturing fluid system (2.2% octadecyl methyl dihydroxyethyl ammonium bromide (OHDAB) +1.4% dodecyl sulfonate sodium +1.8% potassium chloride and 1.6% organic acids) and guar gum fracturing fluid system (hydroxypropyl guar gum (HGG)) was done in these experiments. The proppant concentration (sand/liquid ratio) at static suspended sand is up to 30% when the apparent viscosity of thickening water is 60 mPa·s, which is equivalent to the sand-carrying capacity of guar gum at 120 mPa·s. When the dynamic sand ratio is 40%, the fracturing fluid is not layered, and the gel breaking property is excellent. Continuous shear at room temperature for 60 min showed almost no change in viscosity. The thickening fracturing fluid system has good temperature resistance performance in medium and low temperature formations. The fracture conductivity of thickening water is between 50.6 μm2·cm and 150.4 μm2·cm, and the fracture conductivity damage rate of thickening water is between 8.9% and 17.9%. The fracture conductivity conservation rate of thickening water is more than 80% closing up of fractures, which are superior to the guar gum fracturing fluid system. The new wells have been fractured by thickening water in A block of YC low permeability oil field. It shows that the new type thickening water fracturing system is suitable for A block and can be used in actual production. The actual production of A block shows that the damage of thickening fracturing fluid is low, and the long retention in reservoir will not cause great damage to reservoir.

Research on Stress Sensitivity of Low Permeability Sand Stone Reservoir

2011 ◽  
Vol 317-319 ◽  
pp. 2432-2435
Author(s):  
Yu Xue Sun ◽  
Fei Yao ◽  
Jing Yuan Zhao
Keyword(s):  
Plastic Deformation ◽  
In Situ Stress ◽  
Stress Sensitivity ◽  
Oil Field ◽  
Low Permeability ◽  
High Permeability ◽  
Permeability Changes ◽  
Loading And Unloading ◽  
Sandstone Reservoir

In the process of low-permeability sandstone reservoir exploitation, stress sensitivity takes place with the effective stress rises gradually, which will cause permeability decline. Allowing to the condition of in-situ stress, the study and experiment on the rock core in Jilin oil field Fuxin326 oil layer are presented. The experimental results show that the stress sensitivity of this oil layer is small; the regularity of permeability changes is in accordance with exponential function. The stress sensitivity of high permeability core is larger than that of low permeability core. Moreover, experimental and theoretical analysis shows that low permeability core has a larger permeability loss than high permeability core in loading and unloading process where elastic plastic deformation of rock will happen, which is the major reason that permeability loss can not return completely.

scholarly journals RESEARCH OF THE MECHANISM OF OIL RECOVERY FROM HYDROCARBON DEPOSITS WITH LOW PERMEABILITY RESERVOIRS

2020 ◽  
Vol 17 (34) ◽  
pp. 892-904
Author(s):  
Zinon A KUANGALIEV ◽  
Gulsin S DOSKASIYEVA ◽  
Altynbek S MARDANOV
Keyword(s):  
Oil Recovery ◽  
Oil And Gas ◽  
New Technologies ◽  
High Viscosity ◽  
Economic Feasibility ◽  
Oil Field ◽  
Low Permeability ◽  
Low Grade ◽  
Oil Reserves ◽  
Low Permeability Reservoirs

The main part of Russia's hard-to-recover reserves is 73% for low-grade and carbonate reservoirs, 12% for high-viscosity oil, about 15% of extensive sub-gas zones of oil and gas deposits and 7% of reservoirs lying at great depths. The development of such stocks with the usage of traditional technologies is economically inefficient. It requires the application of new technologies for their development and fundamentally new approaches to design, taking into account the features of extraction of hard-to-extract reserves (HtER). The purpose of this research is to find ways to improve the performance of low-permeability reservoirs. To accomplish this task, the Novobogatinsk South-Eastern Oil Field has been taken as an example and described. The necessary properties of production facilities in the field are highlighted, along with economic feasibility and technological efficiency. The reserves involved in the development are determined and, thanks to the knowledge of the geological oil reserves of the deposits, the potential oil recovery factor is calculated with the existing development technology. As a result of the research, development options were worked out with the results of the calculation of design indicators for the field as a whole. The comparison of oil recovery schedules and ORI, as well as the layout of wells, have been presented. As a result of the study, a description of 3 options for the development of design indicators for the field as a whole is given. The figures show oil production graphs, as well as location patterns. The authors of the study conclude which of the recommended development options can help extract maximum oil reserves.

Effective use Model of Low Permeability Oil Reservoir

2013 ◽  
Vol 753-755 ◽  
pp. 53-57
Author(s):  
Liang Dong Yan ◽  
Zhi Juan Gao ◽  
Feng Gang Dai
Keyword(s):  
Fluid Flow ◽  
Pressure Gradient ◽  
Seepage Flow ◽  
Oil Field ◽  
Low Permeability ◽  
Oil Reservoir ◽  
Reservoir Fluid ◽  
Start Up ◽  
Well Pattern ◽  
Effective Use

The throat of low permeability oil reservoir is narrow and small, the reservoir fluid flow resistance is big, and with the start-up pressure gradient, compare with medium and high permeability reservoir fluid flow, the characteristics are obviously different in performance for non-darcy flow at low speed. This kind of oil field reservoir started in the process of mining scope is small, the degree of use and the development effect is low. To solve these problems, this paper established considering start-up pressure gradient of the new unstable seepage flow mathematical model of non-darcy radial flow which the analytical solution and the productivity equation is deduced, established the effective radius of the use of low permeability reservoirs, and systemicly researched the calculation method of area well pattern of different types of non-darcy seepage.

Sign in / Sign up

Export Citation Format

Share Document