scholarly journals Large-Eddy Simulation of a Gas Turbine Model Combustor

2013 ◽  
Author(s):  
Yee Chee See ◽  
Matthias Ihme
Keyword(s):  
Large Eddy Simulation ◽  
Gas Turbine ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Turbine Model

Large Eddy Simulation of Flow and Heat Transfer Mechanism in Matrix Cooling Channel

2017 ◽  
Author(s):  
Yigang Luan ◽  
Lianfeng Yang ◽  
Bo Wan ◽  
Tao Sun
Keyword(s):  
Heat Transfer ◽  
Flow Field ◽  
Large Eddy Simulation ◽  
Gas Turbine ◽  
Transfer Mechanism ◽  
Heat Transfer Mechanism ◽  
Longitudinal Vortices ◽  
Eddy Simulation ◽  
Flow And Heat Transfer ◽  
Large Eddy

Gas turbine engines have been widely used in modern industry especially in the aviation, marine and energy fields. The efficiency of gas turbines directly affects the economy and emissions. It’s acknowledged that the higher turbine inlet temperatures contribute to the overall gas turbine engine efficiency. Since the components are subject to the heat load, the internal cooling technology of turbine blades is of vital importance to ensure the safe and normal operation. This paper is focused on exploring the flow and heat transfer mechanism in matrix cooling channels. In order to analyze the internal flow field characteristics of this cooling configuration at a Reynolds number of 30000 accurately, large eddy simulation method is carried out. Methods of vortex identification and field synergy are employed to study its flow field. Cross-sectional views of velocity in three subchannels at different positions have been presented. The results show that the airflow is strongly disturbed by the bending part. It’s concluded that due to the bending structure, the airflow becomes complex and disordered. When the airflow goes from the inlet to the turning, some small-sized and discontinuous vortices are formed. Behind the bending structure, the size of the vortices becomes big and the vortices fill the subchannels. Because of the structure of latticework, the airflow is affected by each other. Airflow in one subchannel can exert a shear force on another airflow in the opposite subchannel. It’s the force whose direction is the same as the vortex that enhances the longitudinal vortices. And the longitudinal vortices contribute to the energy exchange of the internal airflow and the heat transfer between airflow and walls. Besides, a comparison of the CFD results and the experimental data is made to prove that the numerical simulation methods are reasonable and acceptable.

Large-Eddy Simulation of Reacting Turbulent Flows in Complex Geometries

2005 ◽  
Vol 73 (3) ◽  
pp. 374-381 ◽  
Author(s):  
K. Mahesh ◽  
G. Constantinescu ◽  
S. Apte ◽  
G. Iaccarino ◽  
F. Ham ◽  
...  
Keyword(s):  
Large Eddy Simulation ◽  
Gas Turbine ◽  
Turbulent Flows ◽  
Reacting Flows ◽  
Gas Turbine Combustor ◽  
Turbine Engine ◽  
Progress Variable ◽  
Eddy Simulation ◽  
Variable Approach ◽  
Large Eddy

Large-eddy simulation (LES) has traditionally been restricted to fairly simple geometries. This paper discusses LES of reacting flows in geometries as complex as commercial gas turbine engine combustors. The incompressible algorithm developed by Mahesh et al. (J. Comput. Phys., 2004, 197, 215–240) is extended to the zero Mach number equations with heat release. Chemical reactions are modeled using the flamelet/progress variable approach of Pierce and Moin (J. Fluid Mech., 2004, 504, 73–97). The simulations are validated against experiment for methane-air combustion in a coaxial geometry, and jet-A surrogate/air combustion in a gas-turbine combustor geometry.

Large Eddy Simulation of rich ammonia/hydrogen/air combustion in a gas turbine burner

2021 ◽  
Author(s):  
Kévin Bioche ◽  
Laurent Bricteux ◽  
Andrea Bertolino ◽  
Alessandro Parente ◽  
Julien Blondeau
Keyword(s):  
Large Eddy Simulation ◽  
Gas Turbine ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Gas Turbine Burner

Large-Eddy Simulation of Flow and Convective Heat Transfer in a Gas Turbine Can Combustor With Synthetic Inlet Turbulence

2012 ◽  
Vol 134 (7) ◽  
Author(s):  
Sunil Patil ◽  
Danesh Tafti
Keyword(s):  
Heat Transfer ◽  
Large Eddy Simulation ◽  
Convective Heat Transfer ◽  
Gas Turbine ◽  
Convective Heat ◽  
Computational Time ◽  
Computational Domain ◽  
Rans Simulation ◽  
Eddy Simulation ◽  
Large Eddy

Large eddy simulations of swirling flow and the associated convective heat transfer in a gas turbine can combustor under cold flow conditions for Reynolds numbers of 50,000 and 80,000 with a characteristic Swirl number of 0.7 are carried out. A precursor Reynolds averaged Navier-Stokes (RANS) simulation is used to provide the inlet boundary conditions to the large-eddy simulation (LES) computational domain, which includes only the can combustor. A stochastic procedure based on the classical view of turbulence as a superposition of the coherent structures is used to simulate the turbulence at the inlet plane of the computational domain using the mean flow velocity and Reynolds stress data from the precursor RANS simulation. To further reduce the overall computational resource requirement and the total computational time, the near wall region is modeled using a zonal two layer model (WMLES). A novel formulation in the generalized co-ordinate system is used for the solution of effective tangential velocity and temperature in the inner layer virtual mesh. The WMLES predictions are compared with the experimental data of Patil et al. (2011, “Experimental and Numerical Investigation of Convective Heat Transfer in Gas Turbine Can Combustor,” ASME J. Turbomach., 133(1), p. 011028) for the local heat transfer distribution on the combustor liner wall obtained using robust infrared thermography technique. The heat transfer coefficient distribution on the liner wall predicted from the WMLES is in good agreement with experimental values. The location and the magnitude of the peak heat transfer are predicted in very close agreement with the experiments.

Sign in / Sign up

Export Citation Format

Share Document