Generation of Equations of Motion of Flying Vehicles as Multibody Systems - General Remarks

2009 ◽  
Author(s):  
Krzysztof Sibilski ◽  
Andrzej Zyluk
Keyword(s):  
Multibody Systems ◽  
Equations Of Motion

scholarly journals Closed-form time derivatives of the equations of motion of rigid body systems

2021 ◽  
Author(s):  
Andreas Müller ◽  
Shivesh Kumar
Keyword(s):  
Rigid Body ◽  
Closed Form ◽  
Multibody Systems ◽  
Equations Of Motion ◽  
Alternative Formulation ◽  
Dynamics Of Rigid Body ◽  
Control Forces ◽  
And Control ◽  
Derivatives Of ◽  
Insight Into

AbstractDerivatives of equations of motion (EOM) describing the dynamics of rigid body systems are becoming increasingly relevant for the robotics community and find many applications in design and control of robotic systems. Controlling robots, and multibody systems comprising elastic components in particular, not only requires smooth trajectories but also the time derivatives of the control forces/torques, hence of the EOM. This paper presents the time derivatives of the EOM in closed form up to second-order as an alternative formulation to the existing recursive algorithms for this purpose, which provides a direct insight into the structure of the derivatives. The Lie group formulation for rigid body systems is used giving rise to very compact and easily parameterized equations.

A Strategy to Accelerate the Numerical Integration in the Dynamic Simulation of Multibody Systems

1997 ◽  
Author(s):  
Jesús Cardenal ◽  
Javier Cuadrado ◽  
Eduardo Bayo
Keyword(s):  
Multibody Systems ◽  
Equations Of Motion ◽  
Stiff Systems ◽  
Step Size ◽  
Step Method ◽  
Integral Of Motion ◽  
Time Step ◽  
Time Step Size ◽  
Variable Time ◽  
Numerical Integrator

Abstract This paper presents a multi-index variable time step method for the integration of the equations of motion of constrained multibody systems in descriptor form. The basis of the method is the augmented Lagrangian formulation with projections in index-3 and index-1. The method takes advantage of the better performance of the index-3 formulation for large time steps and of the stability of the index-1 for low time steps, and automatically switches from one method to the other depending on the required accuracy and values of the time step. The variable time stepping is accomplished through the use of an integral of motion, which in the case of conservative systems becomes the total energy. The error introduced by the numerical integrator in the integral of motion during consecutive time steps provides a good measure of the local integration error, and permits a simple and reliable strategy for varying the time step. Overall, the method is efficient and powerful; it is suitable for stiff and non-stiff systems, robust for all time step sizes, and it works for singular configurations, redundant constraints and topology changes. Also, the constraints in positions, velocities and accelerations are satisfied during the simulation process. The method is robust in the sense that becomes more accurate as the time step size decreases.

Minimum Energy Control of Multibody Systems Utilizing Storage Elements

2009 ◽  
Author(s):  
Werner Schiehlen ◽  
Makoto Iwamura
Keyword(s):  
Multibody Systems ◽  
Optimal Trajectory ◽  
Design Method ◽  
Equations Of Motion ◽  
Minimum Energy ◽  
Operating Time ◽  
Minimum Energy Control ◽  
Robot Systems ◽  
Optimal Design Method ◽  
The Relationship

In this paper, we consider the problem to minimize the energy consumption for controlled multibody systems utilizing passive elastic elements for energy storage useful for robot systems in manufacturing. Firstly, based on the linearized equations of motion, we analyze the relationship between the consumed energy and the operating time, and the optimal trajectory using optimal control theory. Then, we verify the analytical solution by comparing with the numerical one computed considering the full nonlinear dynamics. After that we derive a condition for the operating time to be optimal, and propose the optimal design method for springs. Finally, we show the effectiveness of the design method by applying it to a 2DOF manipulator.

Trajectory Tracking of Underactuated Multibody Systems

2011 ◽  
Author(s):  
Stefan Reichl ◽  
Wolfgang Steiner
Keyword(s):  
Trajectory Tracking ◽  
Multibody Systems ◽  
Degrees Of Freedom ◽  
Inverse Dynamics ◽  
Feedforward Control ◽  
Equations Of Motion ◽  
Three Dimensional ◽  
Differential Algebraic Equations ◽  
State Variables ◽  
Algebraic Equations

This work presents three different approaches in inverse dynamics for the solution of trajectory tracking problems in underactuated multibody systems. Such systems are characterized by less control inputs than degrees of freedom. The first approach uses an extension of the equations of motion by geometric and control constraints. This results in index-five differential-algebraic equations. A projection method is used to reduce the systems index and the resulting equations are solved numerically. The second method is a flatness-based feedforward control design. Input and state variables can be parameterized by the flat outputs and their time derivatives up to a certain order. The third approach uses an optimal control algorithm which is based on the minimization of a cost functional including system outputs and desired trajectory. It has to be distinguished between direct and indirect methods. These specific methods are applied to an underactuated planar crane and a three-dimensional rotary crane.

On MBS Constraints and Projections

2021 ◽  
Author(s):  
Friedrich Pfeiffer
Keyword(s):  
Quadratic Form ◽  
Differential Equations ◽  
Multibody Systems ◽  
Equations Of Motion ◽  
Machine Process ◽  
Constraint Forces ◽  
Process Dynamics ◽  
Robot Tracking ◽  
Minimal Coordinates ◽  
Linear Differential

Abstract Constraints in multibody systems are usually treated by a Lagrange I - method resulting in equations of motion together with the constraint forces. Going from non-minimal coordinates to minimal ones opens the possibility to project the original equations directly to the minimal ones, thus eliminating the constraint forces. The necessary procedure is described, a general example of combined machine-process dynamics discussed and a specific example given. For a n-link robot tracking a path the equations of motion are projected onto this path resulting in quadratic form linear differential equations. They define the space of allowed motion, which is generated by a polygon-system.

On the Use of the Canonical Equations of Motion for the Dynamic Analysis of Constrained Multibody Systems

1992 ◽  
Author(s):  
E. Bayo ◽  
J. M. Jimenez
Keyword(s):  
Dynamic Analysis ◽  
Multibody Systems ◽  
Equations Of Motion ◽  
Mechanical Systems ◽  
Numerical Algorithms ◽  
Constrained Multibody Systems ◽  
Constrained Mechanical Systems ◽  
First Order ◽  
Canonical Variables ◽  
Lagrange’S Multipliers

Abstract We investigate in this paper the different approaches that can be derived from the use of the Hamiltonian or canonical equations of motion for constrained mechanical systems with the intention of responding to the question of whether the use of these equations leads to more efficient and stable numerical algorithms than those coming from acceleration based formalisms. In this process, we propose a new penalty based canonical description of the equations of motion of constrained mechanical systems. This technique leads to a reduced set of first order ordinary differential equations in terms of the canonical variables with no Lagrange’s multipliers involved in the equations. This method shows a clear advantage over the previously proposed acceleration based formulation, in terms of numerical efficiency. In addition, we examine the use of the canonical equations based on independent coordinates, and conclude that in this second case the use of the acceleration based formulation is more advantageous than the canonical counterpart.

Dynamics Modeling of Elastic Multibody Systems Using Kane’s Method As Applied to a Flexible Robot

1997 ◽  
Author(s):  
Ali Meghdari ◽  
Farbod Fahimi
Keyword(s):  
Multibody Systems ◽  
Equations Of Motion ◽  
Component Mode Synthesis ◽  
Flexible Robot ◽  
Dynamics Modeling ◽  
Generalized Coordinates ◽  
Kane’S Method ◽  
Kane's Method ◽  
Elastic Multibody Systems ◽  
Elastic Form

Abstract Generalization of Kane’s equations of motion for elastic multibody systems is considered. Initially, finite element techniques are used to generate the elastic form of generalized coordinates. Then, the number of elastic coordinates are reduced by the component mode synthesis. Finally, Kane’s method is applied to obtain the equations of motion of such systems. Using this method, dynamic model of an elastic robot with one degree of freedom is presented.

The Motion Formalism for Flexible Multibody Systems

2021 ◽  
Author(s):  
Olivier Bauchau ◽  
Valentin Sonneville
Keyword(s):  
Multibody Systems ◽  
Equations Of Motion ◽  
Solution Process ◽  
Flexible Multibody Systems ◽  
Structural Elements ◽  
Governing Equations ◽  
Euclidean Group ◽  
Reduced Order ◽  
Flexible Multibody ◽  
Element Approach

Abstract This paper describes a finite element approach to the analysis of flexible multibody systems. It is based on the motion formalism that (1) uses configuration and motion to describe the kinematics of flexible multibody systems, (2) recognizes that these are members of the Special Euclidean group thereby coupling their displacement and rotation components, and (3) resolves all tensors components in local frames. The goal of this review paper is not to provide an in-depth derivation of all the elements found in typical multibody codes but rather to demonstrate how the motion formalism (1) provides a theoretical framework that unifies the formulation of all structural elements, (2) leads to governing equations of motion that are objective, intrinsic, and present a reduced order of nonlinearity, (3) improves the efficiency of the solution process, and (4) prevents the occurrence of singularities.

Analytical Dynamics of Unrooted Multibody-Systems With Symmetries

1998 ◽  
Author(s):  
Felix M. J. Pfister ◽  
Sunil K. Agrawal
Keyword(s):  
Multibody Systems ◽  
Equations Of Motion ◽  
Analytical Dynamics ◽  
Geometric Properties

Abstract The objectives of this paper are to (i) exploit the structure of Euler-Liouville equations for multibody systems and separate the external and internal aspects of motion, (ii) specialize these equations to systems with special mass and geometric properties such as holonomoids and orthotropoids, (iii) apply the results to special orthotropoids, the spheroidal linkages of Wohlhart, and write their equations of motion in a simple and elegant manner.

Sign in / Sign up

Export Citation Format

Share Document