Evaluation of transonic and supersonic wind-tunnel background noise and effects of surface pressure fluctuation measurements

1972 ◽  
Author(s):  
J. DODS, JR. ◽  
R. HANLY
Keyword(s):  
Wind Tunnel ◽  
Surface Pressure ◽  
Pressure Fluctuation ◽  
Background Noise ◽  
Supersonic Wind Tunnel

scholarly journals Condensation effects on Rayleigh scattering measurements in a supersonic wind tunnel

AIAA Journal ◽  
1991 ◽  
Vol 29 (2) ◽  
pp. 242-246 ◽  
Author(s):  
B. Shirinzadeh ◽  
M. E. Hillard ◽  
R. J. Exton
Keyword(s):  
Wind Tunnel ◽  
Rayleigh Scattering ◽  
Supersonic Wind Tunnel ◽  
Scattering Measurements

Surface Pressure Distribution on a Blade of a 10 m Diameter HAWT (Field Measurements versus Wind Tunnel Measurements)

2005 ◽  
Vol 127 (2) ◽  
pp. 185-191 ◽  
Author(s):  
T. Maeda ◽  
E. Ismaili ◽  
H. Kawabuchi ◽  
Y. Kamada
Keyword(s):  
Wind Tunnel ◽  
Surface Pressure ◽  
Field Measurements ◽  
Reynolds Numbers ◽  
Blade Surface ◽  
Pressure Data ◽  
Surface Pressure Distribution ◽  
Pressure Distributions ◽  
Wind Tunnel Data ◽  
Local Angle

This paper exploits blade surface pressure data acquired by testing a three-bladed upwind turbine operating in the field. Data were collected for a rotor blade at spanwise 0.7R with the rotor disc at zero yaw. Then, for the same blade, surface pressure data were acquired by testing in a wind tunnel. Analyses compared aerodynamic forces and surface pressure distributions under field conditions against analogous baseline data acquired from the wind tunnel data. The results show that aerodynamic performance of the section 70%, for local angle of attack below static stall, is similar for free stream and wind tunnel conditions and resemblances those commonly observed on two-dimensional aerofoils near stall. For post-stall flow, it is presumed that the exhibited differences are attributes of the differences on the Reynolds numbers at which the experiments were conducted.

scholarly journals Supersonic Windtunnel Noise Attenuation

2021 ◽  
Author(s):  
William Wai Lim Wong
Keyword(s):  
Wind Tunnel ◽  
Sound Pressure Level ◽  
Noise Level ◽  
Sound Pressure ◽  
Power Level ◽  
Mesh Size ◽  
Acoustic Power ◽  
Pressure Level ◽  
Supersonic Wind Tunnel ◽  
Acoustic Treatment

The aerodynamic generated noise in the supersonic wind tunnel during operation at Ryerson University has exceeded the threshold of hearing damage. An acoustic silencer was to be designed and added to the wind tunnel to reduce the noise level. The main sources of noise generated from the wind tunnel with the silencer were identified to be located at the convergent divergent nozzle and the turbulent region downstream of the shock wave at the diffuser with the maximum acoustic power level of the entire wind tunnel at 161.09 dB. The designed silencer provided an overall sound pressure level reduction of 21.41 db which was considered as acceptable. Refinement to the mesh size and changes to the geometry of the mixing chamber was suggested for a more accurate result in noise output as well as flow conditions would match up to the physical flow. Additional acoustic treatment should be applied to the wind tunnel to further reduce sound pressure level since the noise level still exceeded the threshold of hearing loss.

Sign in / Sign up

Export Citation Format

Share Document