Effects of Pressure Gradients on Turbulent Boundary Layer Wave Number Frequency Spectra

AIAA Journal ◽  
10.2514/2.864 ◽  
2000 ◽  
Vol 38 (10) ◽  
pp. 1832-1836 ◽  
Author(s):  
K. Cipolla ◽  
W. Keith
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Wave Number ◽  
Pressure Gradients ◽  
Frequency Spectra ◽  
Number Frequency

Measurements of the wave-number/phase velocity spectrum of wall pressure beneath a turbulent boundary layer

1971 ◽  
Vol 45 (1) ◽  
pp. 65-90 ◽  
Author(s):  
J. A. B. Wills
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Phase Velocity ◽  
Wall Pressure ◽  
Wave Number ◽  
Velocity Spectrum ◽  
Spatial Correlations ◽  
Acoustic Disturbances ◽  
Number Frequency ◽  
Spectrum Correction

Measurements are presented of the wave-number/frequency and wave-number/phase velocity spectrum of wall pressure for a two-dimensional turbulent boundary layer in zero pressure gradient, obtained from a Fourier transform of experimental filtered spatial correlations. This method allows the results to be corrected for acoustic disturbances in the wind tunnel, and for finite transducer size. An empirical form for the pressure field is proposed, based on the measurements, and is used to predict a frequency spectrum correction for transducer size which agrees well with measured values.

‘Inactive’ motion and pressure fluctuations in turbulent boundary layers

1967 ◽  
Vol 30 (2) ◽  
pp. 241-258 ◽  
Author(s):  
P. Bradshaw
Keyword(s):  
Boundary Layer ◽  
Outer Layer ◽  
Pressure Fluctuations ◽  
Turbulent Energy ◽  
Viscous Sublayer ◽  
Wave Number ◽  
Noticeable Effect ◽  
Frequency Spectra ◽  
Active Motion ◽  
Order Of Magnitude

Townsend's (1961) hypothesis that the turbulent motion in the inner region of a boundary layer consists of (i) an ‘active’ part which produces the shear stress τ and whose statistical properties are universal functions of τ and y, and (ii) an ‘inactive’ and effectively irrotational part determined by the turbulence in the outer layer, is supported in the present paper by measurements of frequency spectra in a strongly retarded boundary layer, in which the ‘inactive’ motion is particularly intense. The only noticeable effect of the inactive motion is an increased dissipation of kinetic energy into heat in the viscous sublayer, supplied by turbulent energy diffusion from the outer layer towards the surface. The required diffusion is of the right order of magnitude to explain the non-universal values of the triple products measured near the surface, which can therefore be reconciled with universality of the ‘active’ motion.Dimensional analysis shows that the contribution of the ‘active’ inner layer motion to the one-dimensional wave-number spectrum of the surface pressure fluctuations varies as τ2w/k1 up to a wave-number inversely proportional to the thickness of the viscous sublayer. This result is strongly supported by the recent measurements of Hodgson (1967), made with a much smaller ratio of microphone diameter to boundary-layer thickness than has been achieved previously. The disagreement of the result with most other measurements is attributed to inadequate transducer resolution in the other experiments.

Predicting Turbulent Boundary Layer Wall Pressure Fluctuations in Adverse Pressure Gradients

2005 ◽  
Author(s):  
Frank J. Aldrich
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Pressure Gradient ◽  
Pressure Fluctuations ◽  
Adverse Pressure Gradient ◽  
Wall Pressure ◽  
Prediction Tool ◽  
Pressure Gradients ◽  
Wall Pressure Fluctuations ◽  
The Difference

A physics-based approach is employed and a new prediction tool is developed to predict the wavevector-frequency spectrum of the turbulent boundary layer wall pressure fluctuations for subsonic airfoils under the influence of adverse pressure gradients. The prediction tool uses an explicit relationship developed by D. M. Chase, which is based on a fit to zero pressure gradient data. The tool takes into account the boundary layer edge velocity distribution and geometry of the airfoil, including the blade chord and thickness. Comparison to experimental adverse pressure gradient data shows a need for an update to the modeling constants of the Chase model. To optimize the correlation between the predicted turbulent boundary layer wall pressure spectrum and the experimental data, an optimization code (iSIGHT) is employed. This optimization module is used to minimize the absolute value of the difference (in dB) between the predicted values and those measured across the analysis frequency range. An optimized set of modeling constants is derived that provides reasonable agreement with the measurements.

Intermittency measurements in the turbulent boundary layer

1966 ◽  
Vol 25 (4) ◽  
pp. 719-735 ◽  
Author(s):  
H. Fiedler ◽  
M. R. Head
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Focal Point ◽  
Pressure Gradients ◽  
Narrow Beam ◽  
Hot Wire ◽  
Characteristic Parameters ◽  
Mean Velocity ◽  
Form Parameter ◽  
The Mean

An improved version of Corrsin & Kistler's method has been used to measure intermittency in favourable and adverse pressure gradients, and the characteristic parameters of the intermittency have been related to the form parameterHof the mean velocity profiles.It is found that with adverse pressure gradients the centre of intermittency moves outward from the surface while the width of the intermittent zone decreases. The converse is true of favourable pressure gradients, and it seems likely that at sufficiently low values ofHthe flow over the full depth of the layer is only intermittently turbulent.A new method of intermittency measurement is presented which makes use of a photo-electric probe. Smoke is introduced into the boundary layer and illuminated by a narrow beam of parallel light normal to the surface. The photoelectric probe is focused on the illuminated region and a signal is generated when smoke passes through the focal point of the probe lens. Comparison of this signal with the output from a hot-wire at very nearly the same point shows the identity of smoke and turbulence distributions.

scholarly journals An experiment on the adiabatic compressible turbulent boundary layer in adverse and favourable pressure gradients

1972 ◽  
Vol 51 (4) ◽  
pp. 657-672 ◽  
Author(s):  
J. E. Lewis ◽  
R. L. Gran ◽  
T. Kubota
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Pressure Gradients ◽  
Mean Flow ◽  
Adiabatic Wall ◽  
Flow Measurements ◽  
Low Speed ◽  
Velocity Transformation ◽  
Tunnel Model ◽  
Gradient Parameter

A wind-tunnel model was developed to study the two-dimensional turbulent boundary layer in adverse and favourable pressure gradients with out the effects of streamwise surface curvature. Experiments were performed at Mach 4 with an adiabatic wall, and mean flow measurements within the boundary layer were obtained. The data, when viewed in the velocity transformation suggested by Van Driest, show good general agreement with the composite boundary-layer profile developed for the low-speed turbulent boundary layer. Moreover, the pressure gradient parameter suggested by Alber & Coats was found to correlate the data with low-speed results.

Sign in / Sign up

Export Citation Format

Share Document