Surface-Shear-Stress Pulses in Adverse-Pressure-Gradient Turbulent Boundary Layers

AIAA Journal ◽  
2002 ◽  
Vol 40 (1) ◽  
pp. 177-179 ◽  
Author(s):  
V. A. Sandborn
Keyword(s):  
Shear Stress ◽  
Pressure Gradient ◽  
Boundary Layers ◽  
Adverse Pressure Gradient ◽  
Turbulent Boundary Layers ◽  
Surface Shear Stress ◽  
Surface Shear

An Approximate Method for the Calculation of Turbulent Boundary Layers in Diffusers

1957 ◽  
Vol 8 (1) ◽  
pp. 58-77 ◽  
Author(s):  
J. F. Norbury
Keyword(s):  
Boundary Layer ◽  
Shear Stress ◽  
Pressure Gradient ◽  
Approximate Method ◽  
Boundary Layers ◽  
Stress Gradient ◽  
Adverse Pressure Gradient ◽  
Turbulent Boundary Layers ◽  
Form Parameter ◽  
Parameter Equation

SummaryAn approximate method is described for the calculation of turbulent boundary layers in which the turbulence is developed before the commencement of the adverse pressure gradient, as in most diffuser layers. It is based on a method due to Spence which has been modified and also extended to the calculation of three-dimensional diverging layers such as occur in ducts whose breadth is increasing. The velocity profiles occurring in a diverging layer are examined and it is shown that the inner part obeys the universal logarithmic law, as in two-dimensional layers. This result is used to obtain an equation for the form parameter in diverging layers, by substitution in the equation of motion and incorporation of the equations of momentum and continuity for diverging flow. The form parameter equation contains a term involving the gradient of shear stress at y = θ and values of this term are obtained by the analysis of experimental data and the substitution of known values for all the other terms in the form parameter equation. Values of the term involving shear stress gradient are then correlated in terms of known boundary layer quantities, and the resulting correlation allows the formulation of a step-by-step method for the solution of the form parameter equation. This may be used in conjunction with the momentum equation to predict the boundary layer growth. It was not found possible to effect a satisfactory correlation for boundary layers on lifting aerofoils, in which the turbulence develops within the adverse pressure gradient, and the method cannot be used for the prediction of such layers. The results of a number of calculations are given.

Measurements in adverse-pressure-gradient turbulent boundary layers with a step change in surface roughness

1975 ◽  
Vol 70 (3) ◽  
pp. 573-593 ◽  
Author(s):  
W. H. Schofield
Keyword(s):  
Surface Roughness ◽  
Pressure Gradient ◽  
Boundary Layers ◽  
Leading Edge ◽  
Adverse Pressure Gradient ◽  
Turbulent Boundary Layers ◽  
Step Change ◽  
Internal Layer ◽  
Mean Velocity ◽  
Law Of The Wall

The response of turbulent boundary layers to sudden changes in surface roughness under adverse-pressure-gradient conditions has been studied experimentally. The roughness used was in the ‘d’ type array of Perry, Schofield & Joubert (1969). Two cases of a rough-to-smooth change in surface roughness were considered in the same arbitrary adverse pressure gradient. The two cases differed in the distance of the surface discontinuity from the leading edge and gave two sets of flow conditions for the establishment and growth of the internal layer which develops downstream from a change in surface roughness. These conditions were in turn different from those in the zero-pressure-gradient experiments of Antonia & Luxton. The results suggest that the growth of the new internal layer depends solely on the new conditions at the wall and scales with the local roughness length of that wall. Mean velocity profiles in the region after the step change in roughness were accurately described by Coles’ law of the wall-law of the wake combination, which contrasts with the zero-pressure-gradient results of Antonia & Luxton. The skin-friction coefficient after the step change in roughness did not overshoot the equilibrium distribution but made a slow adjustment downstream of the step. Comparisons of mean profiles indicate that similar defect profile shapes are produced in layers with arbitrary adverse pressure gradients at positions where the values of Clauser's equilibrium parameter β (= δ*τ−10dp/dx) are similar, provided that the pressure-gradient history and local values of the pressure gradient are also similar.

Pressure gradient effects on the large-scale structure of turbulent boundary layers

2013 ◽  
Vol 715 ◽  
pp. 477-498 ◽  
Author(s):  
Zambri Harun ◽  
Jason P. Monty ◽  
Romain Mathis ◽  
Ivan Marusic
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Pressure Gradient ◽  
Boundary Layers ◽  
Amplitude Modulation ◽  
Large Scale ◽  
Outer Region ◽  
Adverse Pressure Gradient ◽  
Turbulent Boundary Layers ◽  
Small Scale

AbstractResearch into high-Reynolds-number turbulent boundary layers in recent years has brought about a renewed interest in the larger-scale structures. It is now known that these structures emerge more prominently in the outer region not only due to increased Reynolds number (Metzger & Klewicki, Phys. Fluids, vol. 13(3), 2001, pp. 692–701; Hutchins & Marusic, J. Fluid Mech., vol. 579, 2007, pp. 1–28), but also when a boundary layer is exposed to an adverse pressure gradient (Bradshaw, J. Fluid Mech., vol. 29, 1967, pp. 625–645; Lee & Sung, J. Fluid Mech., vol. 639, 2009, pp. 101–131). The latter case has not received as much attention in the literature. As such, this work investigates the modification of the large-scale features of boundary layers subjected to zero, adverse and favourable pressure gradients. It is first shown that the mean velocities, turbulence intensities and turbulence production are significantly different in the outer region across the three cases. Spectral and scale decomposition analyses confirm that the large scales are more energized throughout the entire adverse pressure gradient boundary layer, especially in the outer region. Although more energetic, there is a similar spectral distribution of energy in the wake region, implying the geometrical structure of the outer layer remains universal in all cases. Comparisons are also made of the amplitude modulation of small scales by the large-scale motions for the three pressure gradient cases. The wall-normal location of the zero-crossing of small-scale amplitude modulation is found to increase with increasing pressure gradient, yet this location continues to coincide with the large-scale energetic peak wall-normal location (as has been observed in zero pressure gradient boundary layers). The amplitude modulation effect is found to increase as pressure gradient is increased from favourable to adverse.

Sign in / Sign up

Export Citation Format

Share Document