Database Development and Component Design with Two-Dimensional Trusslike Microstructures

AIAA Journal ◽  
2021 ◽  
pp. 1-6
Author(s):  
Kiara McMillan ◽  
Pinar Acar
Keyword(s):  
Two Dimensional ◽  
Database Development ◽  
Component Design

Direct Coupling of a Two-Dimensional Fan Model in a Turbofan Engine Performance Simulation

2016 ◽  
Author(s):  
Ioannis Templalexis ◽  
Alexios Alexiou ◽  
Vassilios Pachidis ◽  
Ioannis Roumeliotis ◽  
Nikolaos Aretakis
Keyword(s):  
Three Dimensional ◽  
Engine Performance ◽  
System Level ◽  
Design Parameters ◽  
High Fidelity ◽  
Two Dimensional ◽  
Performance Simulation ◽  
Cfd Models ◽  
Component Design ◽  
Complex Phenomena

Coupling of high fidelity component calculations with overall engine performance simulations (zooming) can provide more accurate physics and geometry based estimates of component performance. Such a simulation strategy offers the ability to study complex phenomena and their effects on engine performance and enables component design changes to be studied at engine system level. Additionally, component interaction effects can be better captured. Overall, this approach can reduce the need for testing and the engine development time and cost. Different coupling methods and tools have been proposed and developed over the years ranging from integrating the results of the high fidelity code through conventional performance component maps to fully-integrated three-dimensional CFD models. The present paper deals with the direct integration of an in-house two-dimensional (through flow) streamline curvature code (SOCRATES) in a commercial engine performance simulation environment (PROOSIS) with the aim to establish the necessary coupling methodology that will allow future advanced studies to be performed (e.g. engine condition diagnosis, design optimization, mission analysis, distorted flow). A notional two-shaft turbofan model typical for light business jets and trainer aircraft is initially created using components with conventional map-defined performance. Next, a derivative model is produced where the fan component is replaced with one that integrates the high fidelity code. For both cases, an operating line is simulated at sea-level static take-off conditions and their performances are compared. Finally, the versatility of the approach is further demonstrated through a parametric study of various fan design parameters for a better thermodynamic matching with the driving turbine at design point operation.

A Two-Dimensional Conjugate Heat Transfer Model for Forced Air Cooling of an Electronic Device

1989 ◽  
Vol 111 (1) ◽  
pp. 41-45 ◽  
Author(s):  
A. Zebib ◽  
Y. K. Wo
Keyword(s):  
Heat Transfer ◽  
Conjugate Heat Transfer ◽  
Electronic Device ◽  
Transfer Problem ◽  
Maximum Temperature ◽  
Transfer Model ◽  
Air Cooling ◽  
Two Dimensional ◽  
Component Design ◽  
Forced Air

Thermal analysis of forced air cooling of an electronic component is modeled as a two-dimensional conjugate heat transfer problem. The velocity field in a constricted channel is first computed. Then, for a typical electronic module, the energy equation is solved with allowance for discontinuities in the thermal conductivity. Variation of the maximum temperature with the average air velocity is presented. The importance of our approach in evaluating possible benefits due to changes in component design and the limitations of the two-dimensional model are discussed.

scholarly journals Decomposition-Based Assembly Synthesis for In-Process Dimensional Adjustability

2002 ◽  
Author(s):  
Byungwoo Lee ◽  
Kazuhiro Saitou
Keyword(s):  
Design Process ◽  
Early Stage ◽  
Product Configuration ◽  
Two Dimensional ◽  
Design Phase ◽  
Assembly Design ◽  
Component Design ◽  
Assembly Sequences ◽  
Simple Rules ◽  
Final Design

This paper presents a method of assembly synthesis focused on the in-process adjustability, where assembly synthesis is defined as the decomposition of the end product design prior to the detailed component design phase. Focusing on the effect of joint configurations on dimensional integrity of complex assemblies, the method recursively decomposes a product configuration and assigns joint configurations according to simple rules, in order to achieve a designed dimensional adjustability and non-forced fit. The rules employed during the decomposition process are drawn from the previous works of assembly design. An augmented AND/OR graph is utilized to represent a process of assembly synthesis with the corresponding assembly sequences, and the algorithm for generating the AND/OR graph is discussed. The method is applied to two dimensional skeletons of product designs at very early stage of the design process. The relation of the assembly synthesis to Datum Flow Chain (Mantripragada and Whitney, 1998) is discussed. It is also shown that each final design from the assembly synthesis defines its own Datum Flow Chain.

Modular Structural Component Design Using the First Order Analysis and Decomposition-Based Assembly Synthesis

2001 ◽  
Author(s):  
Onur L. Cetin ◽  
Kazuhiro Saitou ◽  
Hidekazu Nishigaki ◽  
Shinji Nishiwaki ◽  
Tatsuyuki Amago ◽  
...  
Keyword(s):  
Optimization Method ◽  
Two Dimensional ◽  
Order Analysis ◽  
First Order ◽  
Automotive Body ◽  
Automated Method ◽  
Trade Offs ◽  
Component Design ◽  
Module Geometry ◽  
Topology Optimization Method

Abstract This paper discusses an automated method for designing modular components that can be shared within multiple structural products, such as automotive bodies for sibling vehicles. The method is an extension of the concept of decomposition-based assembly synthesis. A beam-based topology optimization method, originally developed for First Order Analysis (FOA) of the automotive body structures, is utilized in order to obtain the “base” structures subject to decomposition. It is expected that the method will facilitate the early decisions on module geometry in automotive body structures, by enhancing the capability of the FOA system. Several case studies with two-dimensional structures are reported to demonstrate the effectiveness of the proposed method. The results indicate that two structures optimized for a similar, but slightly different boundary loading conditions are successfully decomposed to contain a component that can be shared by the structures. Several Pareto optimal decompositions are presented to illustrate the trade-offs among multiple decomposition criteria, with different weights for each objective function.

scholarly journals Decomposition-Based Assembly Synthesis for In-Process Dimensional Adjustability

2003 ◽  
Vol 125 (3) ◽  
pp. 464-473 ◽  
Author(s):  
Byungwoo Lee ◽  
Kazuhiro Saitou
Keyword(s):  
Design Process ◽  
Early Stage ◽  
Product Configuration ◽  
Two Dimensional ◽  
Design Phase ◽  
Assembly Design ◽  
Component Design ◽  
Assembly Sequences ◽  
Simple Rules ◽  
Final Design

This paper presents a method of assembly synthesis focused on the in-process adjustability, where assembly synthesis is defined as the decomposition of the end product design prior to the detailed component design phase. Focusing on the effect of joint configurations on dimensional integrity of complex assemblies, the method recursively decomposes a product configuration and assigns joint configurations according to simple rules, in order to achieve a designed dimensional adjustability and non-forced fit. The rules employed during the decomposition process are drawn from the previous works of assembly design. An augmented AND/OR graph is utilized to represent a process of assembly synthesis with the corresponding assembly sequences, and the algorithm for generating the AND/OR graph is discussed. The method is applied to two dimensional skeletons of products without moving parts at very early stage of the design process. The relation of the assembly synthesis to Datum Flow Chain [1] is discussed. It is also shown that each final design from the assembly synthesis defines its own Datum Flow Chain.

Spectrophotometric measurements of objective-prism spectra

1966 ◽  
Vol 24 ◽  
pp. 118-119
Author(s):  
Th. Schmidt-Kaler
Keyword(s):  
Progress Report ◽  
Two Dimensional ◽  
Objective Prism ◽  
Made In

I should like to give you a very condensed progress report on some spectrophotometric measurements of objective-prism spectra made in collaboration with H. Leicher at Bonn. The procedure used is almost completely automatic. The measurements are made with the help of a semi-automatic fully digitized registering microphotometer constructed by Hög-Hamburg. The reductions are carried out with the aid of a number of interconnected programmes written for the computer IBM 7090, beginning with the output of the photometer in the form of punched cards and ending with the printing-out of the final two-dimensional classifications.

Introductory paper

1966 ◽  
Vol 24 ◽  
pp. 3-5
Author(s):  
W. W. Morgan
Keyword(s):  
Line Intensity ◽  
Classification Scheme ◽  
Two Dimensional ◽  
Spectral Classification ◽  
Dimensional Array ◽  
Rr Lyrae ◽  
Metallic Line ◽  
Introductory Paper ◽  
Parameter Varying ◽  
Definition Of

1. The definition of “normal” stars in spectral classification changes with time; at the time of the publication of theYerkes Spectral Atlasthe term “normal” was applied to stars whose spectra could be fitted smoothly into a two-dimensional array. Thus, at that time, weak-lined spectra (RR Lyrae and HD 140283) would have been considered peculiar. At the present time we would tend to classify such spectra as “normal”—in a more complicated classification scheme which would have a parameter varying with metallic-line intensity within a specific spectral subdivision.

A one-dimensional self-gravitating stellar gas

1966 ◽  
Vol 25 ◽  
pp. 46-48 ◽  
Author(s):  
M. Lecar
Keyword(s):  
Gravitational Field ◽  
Phase Space ◽  
Motion Picture ◽  
Space Distribution ◽  
Two Dimensional ◽  
One Dimensional ◽  
Phase Space Distribution ◽  
Dimensional Phase Space ◽  
The Mean

“Dynamical mixing”, i.e. relaxation of a stellar phase space distribution through interaction with the mean gravitational field, is numerically investigated for a one-dimensional self-gravitating stellar gas. Qualitative results are presented in the form of a motion picture of the flow of phase points (representing homogeneous slabs of stars) in two-dimensional phase space.

Analysis of the 9th November 1990 flare

2000 ◽  
Vol 179 ◽  
pp. 229-232
Author(s):  
Anita Joshi ◽  
Wahab Uddin
Keyword(s):  
Image Processing ◽  
Two Dimensional ◽  
Temporal Behaviour ◽  
Contour Maps ◽  
Dimensional Measurements ◽  
Processing Software ◽  
Image Processing Software

AbstractIn this paper we present complete two-dimensional measurements of the observed brightness of the 9th November 1990Hαflare, using a PDS microdensitometer scanner and image processing software MIDAS. The resulting isophotal contour maps, were used to describe morphological-cum-temporal behaviour of the flare and also the kernels of the flare. Correlation of theHαflare with SXR and MW radiations were also studied.

Sign in / Sign up

Export Citation Format

Share Document