scholarly journals Seismic retrofitting of mid-rise reinforced concrete framed structures

2015 ◽  
Author(s):  
Y. E. Ibrahim
Keyword(s):  
Reinforced Concrete ◽  
Seismic Retrofitting ◽  
Framed Structures

scholarly journals Shear Behavior of a Reinforced Concrete Frame Retrofitted with a Hinged Steel Damping System

2020 ◽  
Vol 12 (24) ◽  
pp. 10360
Author(s):  
Hyun-Do Yun ◽  
Sun-Woong Kim ◽  
Wan-Shin Park ◽  
Sun-Woo Kim
Keyword(s):  
Reinforced Concrete ◽  
Shear Behavior ◽  
Seismic Retrofitting ◽  
Reinforced Concrete Frame ◽  
Main Research ◽  
Torsion Spring ◽  
Concrete Frame ◽  
Energy Dissipation Capacity ◽  
Research Questions ◽  
Torsion Springs

The purpose of this study was to experimentally evaluate the effect of a hinged steel damping system on the shear behavior of a nonductile reinforced concrete frame with an opening. For the experimental test, a total of three full-scale reinforced concrete frame specimens were planned, based on the “no retrofitting” (NR) specimens with non-seismic details. The main research questions were whether the hinged steel damping system is reinforced and whether torsion springs are installed in the hinged steel damping system. From the results of the experiment, the hinged steel damping system (DR specimen) was found to be effective in seismic retrofitting, while isolating the opening of the reinforced concrete (RC) frame, and the torsion spring installed at the hinged connection (DSR specimen) was evaluated to be effective in controlling the amount of deformation of the upper and lower dampers. The strength, stiffness, and energy dissipation capacity of the DSR specimen were slightly improved compared to the DR specimen, and it was confirmed that stress redistribution was induced by the rotational stiffness of the torsion spring installed in the hinge connection between the upper and lower frames.

scholarly journals A bi-dissipative damage model for concrete

2015 ◽  
Vol 8 (1) ◽  
pp. 49-65
Author(s):  
J. J. C. Pituba ◽  
W. M. Pereira Júnior
Keyword(s):  
Reinforced Concrete ◽  
Structural Engineering ◽  
Damage Mechanics ◽  
Damage Model ◽  
Continuum Damage Mechanics ◽  
Concrete Material ◽  
Framed Structures ◽  
Energy Equivalence ◽  
Proposed Model ◽  
Damage Processes

This work deals with an improvement of an anisotropic damage model in order to analyze reinforced concrete structures submitted to reversal loading. The original constitutive model is based on the fundamental hypothesis of energy equivalence between real and continuous media following the concepts of the Continuum Damage Mechanics. The concrete is assumed as an initial elastic isotropic medium presenting anisotropy, permanent strains and bimodularity induced by damage evolution. In order to take into account the bimodularity, two damage tensors governing the rigidity in tension or compression regimes are introduced. However, the original model is not capable to simulate the influence of the previous damage processes in compression regimes. In order to avoid this problem, some conditions are introduced to simulate the damage unilateral effect. It has noted that the damage model is agreement with to micromechanical theory conditions when dealing to unilateral effect in concrete material. Finally, the proposed model is applied in the analyses of reinforced concrete framed structures submitted to reversal loading. These numerical applications show the good performance of the model and its potentialities to simulate practical problems in structural engineering.

Damage to reinforced concrete buildings caused by the July 22, 1967 earthquake in Turkey

1969 ◽  
Vol 59 (2) ◽  
pp. 631-650
Author(s):  
Safak Z. Uzsoy ◽  
Uğur Ersoy
Keyword(s):  
Reinforced Concrete ◽  
Reinforced Concrete Buildings ◽  
Framed Structures ◽  
Concrete Buildings ◽  
Observed Damage ◽  
Construction Practice

abstract An attempt is made to analyze the damage caused to reinforced concrete-framed structures in the towns of İzmit and Adapazarı by the Mudurnu Valley earthquake of July 22, 1967. The observed damage shows that elaborate calculations for the design of structures to withstand earthquake forces are of little use unless they are based upon sound concepts, proper details, and are carried out by construction practice of good quality.

scholarly journals Experimental Study on Seismic Retrofitting of Reinforced Concrete Frames Using Welded Concrete-Filled Steel Tubes

2020 ◽  
Vol 10 (20) ◽  
pp. 7061 ◽  
Author(s):  
Kyong Min Ro ◽  
Min Sook Kim ◽  
Young Hak Lee
Keyword(s):  
Reinforced Concrete ◽  
Seismic Performance ◽  
Seismic Energy ◽  
Maximum Load ◽  
Steel Tube ◽  
Seismic Retrofitting ◽  
Reinforced Concrete Frame ◽  
Concrete Frame ◽  
Moment Resisting Frames ◽  
Moment Resisting

Buildings constructed with non-seismic details are at risk of damage and collapse when an earthquake occurs due to a lack of strength, stiffness, and ductility. For reinforced concrete (RC) moment-resisting frames, seismic retrofitting methods that can enhance strength or ductility should be applied. However, such strategies have many disadvantages related to constructability, serviceability, securing integrity, and cost. In this paper, a welded concrete-filled steel tube (WCFST) system was examined in order to resolve the problems of the existing seismic retrofitting methods for RC moment-resisting frames. To evaluate the seismic performance of the proposed system, two specimens, one with non-seismic details and another reinforced with a WCFST seismic system, were manufactured for the cyclic loading tests. As a result of the experiments, the specimen retrofitted with the WCFST system showed maximum load, effective stiffness, and energy dissipation capacity values approximately 3, 2, and 2.5 times greater, respectively, than those obtained from the existing reinforced concrete frame specimen. The experimental results indicate that the proposed WCFST system is expected to be effective at improving the seismic performance by enhancing both the strength of the existing reinforced concrete frame structures and the dissipation of the seismic energy.

scholarly journals An index-based method for evaluating seismic retrofitting techniques. Application to a reinforced concrete primary school in Huelva

PLoS ONE ◽  
2019 ◽  
Vol 14 (4) ◽  
pp. e0215120 ◽  
Author(s):  
María-Victoria Requena-García-Cruz ◽  
Antonio Morales-Esteban ◽  
Percy Durand-Neyra ◽  
João M. C. Estêvão
Keyword(s):  
Reinforced Concrete ◽  
Primary School ◽  
Seismic Retrofitting
Sign in / Sign up

Export Citation Format

Share Document