Damage detection on reinforced concrete framed structures using a band-variable filter

2013 ◽  
pp. 859-860
Keyword(s):  
Reinforced Concrete ◽  
Damage Detection ◽  
Framed Structures

scholarly journals Toward Structural Health Monitoring of Civil Structures Based on Self-Sensing Concrete Nanocomposites: A Validation in a Reinforced-Concrete Beam

2021 ◽  
Vol 15 (1) ◽  
Author(s):  
Diego L. Castañeda-Saldarriaga ◽  
Joham Alvarez-Montoya ◽  
Vladimir Martínez-Tejada ◽  
Julián Sierra-Pérez
Keyword(s):  
Reinforced Concrete ◽  
Damage Detection ◽  
Direct Current ◽  
Health Monitoring ◽  
Electrical Resistance ◽  
Concrete Beam ◽  
Reinforced Concrete Beam ◽  
Structural Member ◽  
Rc Beam ◽  
Electric Resistance

AbstractSelf-sensing concrete materials, also known as smart concretes, are emerging as a promising technological development for the construction industry, where novel materials with the capability of providing information about the structural integrity while operating as a structural material are required. Despite progress in the field, there are issues related to the integration of these composites in full-scale structural members that need to be addressed before broad practical implementations. This article reports the manufacturing and multipurpose experimental characterization of a cement-based matrix (CBM) composite with carbon nanotube (CNT) inclusions and its integration inside a representative structural member. Methodologies based on current–voltage (I–V) curves, direct current (DC), and biphasic direct current (BDC) were used to study and characterize the electric resistance of the CNT/CBM composite. Their self-sensing behavior was studied using a compression test, while electric resistance measures were taken. To evaluate the damage detection capability, a CNT/CBM parallelepiped was embedded into a reinforced-concrete beam (RC beam) and tested under three-point bending. Principal finding includes the validation of the material’s piezoresistivity behavior and its suitability to be used as strain sensor. Also, test results showed that manufactured composites exhibit an Ohmic response. The embedded CNT/CBM material exhibited a dominant linear proportionality between electrical resistance values, load magnitude, and strain changes into the RC beam. Finally, a change in the global stiffness (associated with a damage occurrence on the beam) was successfully self-sensed using the manufactured sensor by means of the variation in the electrical resistance. These results demonstrate the potential of CNT/CBM composites to be used in real-world structural health monitoring (SHM) applications for damage detection by identifying changes in stiffness of the monitored structural member.

scholarly journals A bi-dissipative damage model for concrete

2015 ◽  
Vol 8 (1) ◽  
pp. 49-65
Author(s):  
J. J. C. Pituba ◽  
W. M. Pereira Júnior
Keyword(s):  
Reinforced Concrete ◽  
Structural Engineering ◽  
Damage Mechanics ◽  
Damage Model ◽  
Continuum Damage Mechanics ◽  
Concrete Material ◽  
Framed Structures ◽  
Energy Equivalence ◽  
Proposed Model ◽  
Damage Processes

This work deals with an improvement of an anisotropic damage model in order to analyze reinforced concrete structures submitted to reversal loading. The original constitutive model is based on the fundamental hypothesis of energy equivalence between real and continuous media following the concepts of the Continuum Damage Mechanics. The concrete is assumed as an initial elastic isotropic medium presenting anisotropy, permanent strains and bimodularity induced by damage evolution. In order to take into account the bimodularity, two damage tensors governing the rigidity in tension or compression regimes are introduced. However, the original model is not capable to simulate the influence of the previous damage processes in compression regimes. In order to avoid this problem, some conditions are introduced to simulate the damage unilateral effect. It has noted that the damage model is agreement with to micromechanical theory conditions when dealing to unilateral effect in concrete material. Finally, the proposed model is applied in the analyses of reinforced concrete framed structures submitted to reversal loading. These numerical applications show the good performance of the model and its potentialities to simulate practical problems in structural engineering.

Damage to reinforced concrete buildings caused by the July 22, 1967 earthquake in Turkey

1969 ◽  
Vol 59 (2) ◽  
pp. 631-650
Author(s):  
Safak Z. Uzsoy ◽  
Uğur Ersoy
Keyword(s):  
Reinforced Concrete ◽  
Reinforced Concrete Buildings ◽  
Framed Structures ◽  
Concrete Buildings ◽  
Observed Damage ◽  
Construction Practice

abstract An attempt is made to analyze the damage caused to reinforced concrete-framed structures in the towns of İzmit and Adapazarı by the Mudurnu Valley earthquake of July 22, 1967. The observed damage shows that elaborate calculations for the design of structures to withstand earthquake forces are of little use unless they are based upon sound concepts, proper details, and are carried out by construction practice of good quality.

Sign in / Sign up

Export Citation Format

Share Document