scholarly journals Influence of the Fibrous Structure on the Physical and Mechanical Characteristics of Insulating Slabs from Flax Noils

2017 ◽  
Vol 20 (1) ◽  
Author(s):  
Aleksandr Bakatovich ◽  
Sergey Romanovskiy
Keyword(s):  
Mechanical Characteristics ◽  
Fibrous Structure ◽  
Physical And Mechanical Characteristics

BENCH DESIGN AND STUDY OF PHYSICAL AND MECHANICAL CHARACTERISTICS OF A TEAT CUP LINER WITH ANTIBACTERIAL FILLER

2020 ◽  
pp. 22-26
Author(s):  
YURY G. IVANOV ◽  
◽  
YELENA V. MASHOSHINA ◽  
LYUDMILA N. VERLIKOVA ◽  
DARIA G. GELETIY ◽  
...  
Keyword(s):  
Mechanical Characteristics ◽  
Physical And Mechanical Characteristics

Discharge-pulse Geotechnical Electro Discharge Technology of Bases Strengthening

2020 ◽  
Vol 787 (12) ◽  
pp. 63-65
Author(s):  
N.S. Sokolov
Keyword(s):  
Bearing Capacity ◽  
Mechanical Characteristics ◽  
Discharge Pulse ◽  
Zero Values ◽  
Traditional Technologies ◽  
Negative Friction ◽  
Geotechnical Problems ◽  
Physical And Mechanical Characteristics

The problem of increasing the bearing capacity of the base is an relevant problem in modern geotechnical construction. When significant loads are transmitted to the base, the use of traditional technologies is not always justified. Often there is an urgent need to use non-standard ways to strengthen the bases. In many cases, the geotechnical situation is aggravated by the presence of weak underlying layers with unstable physical and mechanical characteristics in engineering-geological sections. When strengthening such bases with the help of traditional piles, the latter can get negative friction, which significantly reduces their bearing capacity on the ground, sometimes reaching zero values. This may lead to additional precipitations of the objects being constructed and constructed in the zone of geotechnical influence. The use of ERT piles in most cases successfully solves many complex geotechnical problems.

Promising hybrid fabrics based on carbon and aramid fibers as a reinforcing filler for polymer composites

2019 ◽  
pp. 86-95 ◽  
Author(s):  
G. F. Zhelezina ◽  
V. G. Bova ◽  
S. I. Voinov ◽  
A. Ch. Kan
Keyword(s):  
Composite Material ◽  
Polymer Composites ◽  
Carbon Fibers ◽  
Mechanical Characteristics ◽  
High Strength ◽  
High Modulus ◽  
Hybrid Composite Material ◽  
Hybrid Fabric ◽  
Reinforcing Filler ◽  
Physical And Mechanical Characteristics

The paper considers possibilities of using a hybrid fabric made of high-modulus carbon yarn brand ZhGV and high-strength aramid yarns brand Rusar-NT for polymer composites reinforcement. The results of studies of the physical and mechanical characteristics of hybrid composite material and values of the implementation of the strength and elasticity carbon fibers and aramid module for composite material are presented. 

The Composite Reinforcement of LLC «SK»

2015 ◽  
Vol 752-753 ◽  
pp. 749-757
Author(s):  
Svetlana Kiski ◽  
Zhanna Teplova ◽  
Alexey Sokolov
Keyword(s):  
Construction Industry ◽  
Russian Federation ◽  
Mechanical Characteristics ◽  
Analysis And Synthesis ◽  
The Russian Federation ◽  
Under Construction ◽  
Available Information ◽  
Main Producer ◽  
Physical And Mechanical Characteristics ◽  
Composite Reinforcements

The review of the main physical and mechanical characteristics of steel and nonmetallic composite reinforcements is presented in the article. Also there are complex studying, analysis and synthesis of available information. Much attention is paid to recommendations for designing building constructions of different functions with nonmetallic composite reinforcements. Scopes of nonmetallic composite reinforcements in the construction industry in Russia and abroad are considered.Information about main producer and the official distributor of composite reinforcements is provided in the article. This company is the official distributor in the Northwest of the Russian Federation. Their production is successfully used on many objects under construction in Russia. Materials of the article are based on the real photographic materials provided by personal archive of the company.

Physical and Mechanical Characteristics of Raw Jute Fibers, Threads and Diatons

2021 ◽  
Author(s):  
Arnas Majumder ◽  
Flavio Stochino ◽  
Ilenia Farina ◽  
Monica Valdes ◽  
Fernando Fraternali ◽  
...  
Keyword(s):  
Mechanical Characteristics ◽  
Jute Fibers ◽  
Physical And Mechanical Characteristics

Effect of MgO•Sb2O5 on Fire Resistance and Physical and Mechanical Properties of Cable PVC-Plasticate

2021 ◽  
Vol 899 ◽  
pp. 557-562
Author(s):  
Timur A. Borukaev ◽  
Luiza I. Kitieva ◽  
Abubekir Kh. Shaov ◽  
A.A. Kyarov
Keyword(s):  
Mechanical Properties ◽  
Fire Resistance ◽  
Mechanical Characteristics ◽  
Negative Impact ◽  
Physical And Mechanical Properties ◽  
Antimony Oxide ◽  
Magnesium Carbonate ◽  
Physical And Mechanical Characteristics

Based on magnesium carbonate and antimony oxide (V), MgO•Sb2O5 was obtained. In the formulation of fire-resistant cable PVC-plasticate, antimony (III) oxide was replaced by MgO•Sb2O5 and the fire resistance and physical and mechanical properties of the resulting compound were investigated. It is shown that the replacement of antimony (III) oxide in the composition of PVC cable compound MgO•Sb2O5 leads to the production of a compound that is not inferior in its characteristics to the original plastic compound. In particular, the fire resistance of cable PVC-plasticate, standard industrial formulation and with the obtained MgO•Sb2O5, is practically the same (OI=32%). It has been established that the physical and mechanical characteristics of the cable compound, when replacing antimony oxide (III) with MgO•Sb2O5 in the formulation, remain at the level of the original compound, while MgO×Sb2O5 will have a less negative impact on the environment.

Modeling of the vibroacoustic dynamic system “machined workpiece-slide” of turning center

2021 ◽  
pp. 531-536
Author(s):  
V.F. Bez’yazychny ◽  
A.N. Chukarin ◽  
P.V. Chumak
Keyword(s):  
Dynamic System ◽  
Mechanical Characteristics ◽  
Cutting Tool ◽  
Vibration Energy ◽  
Energy Losses ◽  
Effective Coefficient ◽  
Absorbing Materials ◽  
Turning Center ◽  
Force Impact ◽  
Physical And Mechanical Characteristics

Settlement dependences on determining the vibration characteristics of the machined workpieces, taking into account geometric, physical and mechanical characteristics and the force impact from the side of the cutting tool are established. In determining the dependences the effective coefficient of vibration energy losses was taken into account, providing the required value of which, is achieved by reducing vibration in the source due to the use of vibration-absorbing materials.

Sign in / Sign up

Export Citation Format

Share Document