scholarly journals Some variables affecting the characteristics of Eudragit E-sodium alginate polyelectrolyte complex as a tablet matrix for diltiazem hydrochloride

2014 ◽  
Vol 64 (1) ◽  
pp. 89-104 ◽  
Author(s):  
Rehab Mohammad Yusif ◽  
Irhan Ibrahim Abu Hashim ◽  
Marwa Salah El-Dahan
Keyword(s):  
Sodium Alginate ◽  
Diltiazem Hydrochloride ◽  
Scanning Calorimetry ◽  
Polyelectrolyte Complexes ◽  
Low Viscosity ◽  
Eudragit E ◽  
Swelling Characteristics ◽  
Ft Ir ◽  
Physical Mixtures

Abstract Eudragit E (EE)-sodium alginate (SA) polyelectrolyte complexes (PECs) were prepared at pH 4 and 5.8 using sodium alginate of high (SAH) and low viscosity (SAL). The optimum EE-SA complexation mass ratio was determined using viscosity measurements. Interactions between EE and SA in PECs were characterized by Fourier transform infra-red spectroscopy (FT-IR) and differential scanning calorimetry (DSC). Diltiazem hydrochloride (DTZ HCl) tablets were prepared using the prepared EE-SA PECs and their physical mixtures at different ratios as matrices. Tablets were evaluated for swelling characteristics and in vitro drug release. Tablets containing EE-SAH physical mixtures of ratios (1.5:1 and 1:3) as matrices were effective in achieving sustained release of DTZ HCl, where the percent drug released was significantly (p < 0.05) decreased compared to that from tablets either containing the same ratios of EE-SAL physical mixtures or the preformed EE- -SAH and EE-SAL PECs.

Characterization and Screening of a Novel Multiparticulate Pulsatile Delivery of Aceclofenac

2016 ◽  
Vol 9 (5) ◽  
pp. 3494-3501
Author(s):  
Bipul Nath ◽  
Santimoni Saikia
Keyword(s):  
Drug Release ◽  
Sodium Alginate ◽  
Alginate Beads ◽  
In Vitro Drug Release ◽  
Dsc Studies ◽  
Ft Ir ◽  
Lag Period ◽  
Pulsatile Delivery ◽  
Ca Alginate

In the present investigation, sodium alginate based multiparticulate system overcoated with time and pH dependent polymer was studied in the form of oral pulsatile system to achieve pulsatile with sustained release of aceclofenac for chronotherapy of rheumatoid arthritis seven batches of micro beads with varying concentration of sodium alginate (2-5 %) were prepared by ionotropic-gelation method using CaCl2 as cross-linking agent. The prepared Ca-alginate beads were coated with 5% Eudragit L100 and filled into pulsatile capsule with varying proportion of plugging materials. Drug loaded microbeads were investigated for physicochemical properties and drug release characteristics. The mean particle sizes of drug-loaded microbeads were found to be in the range 596±1.1 to 860 ± 1.2 micron and %DEE in the range of 65-85%. FT-IR and DSC studies revealed the absence of drug polymer interactions. The release of aceclofenac from formulations F1 to F7 in buffer media (pH 6.8) at the end of 5h was 65.6, 60.7, 55.7, 41.2, 39.2, 27 and 25% respectively. Pulsatile system filled with eudragit coated Ca-alginate microbeads (F2) showed better drug content, particle size, surface topography, in-vitro drug release in a controlled manner. Different plugging materials like Sterculia gum, HPMC K4M and Carbopol were used in the design of pulsatile capsule. The pulsatile system remained intact in buffer pH 1.2 for 2 hours due to enteric coat of the system with HPMCP. The enteric coat dissolved when the pH of medium was changed to 7.4. The pulsatile system developed with Sterculia gum as plugging material showed satisfactory lag period when compared to HPMC and Carbopol.

The Development of Pemetrexed Diacid-Loaded Gelatin-Cloisite 30B (MMT) Nanocomposite for Improved Oral Efficacy Against Cancer: Characterization, In-Vitro and Ex-Vivo Assessment

2020 ◽  
Vol 17 (3) ◽  
pp. 246-256
Author(s):  
Kriti Soni ◽  
Ali Mujtaba ◽  
Md. Habban Akhter ◽  
Kanchan Kohli
Keyword(s):  
Drug Release ◽  
Oral Delivery ◽  
Ex Vivo ◽  
Confocal Laser ◽  
Release Mechanism ◽  
Scanning Calorimetry ◽  
Sem Images ◽  
Cloisite 30B ◽  
Ft Ir

Aim: The intention of this investigation was to develop Pemetrexed Diacid (PTX)-loaded gelatine-cloisite 30B (MMT) nanocomposite for the potential oral delivery of PTX and the in vitro, and ex vivo assessment. Background: Gelatin/Cloisite 30 B (MMT) nanocomposites were prepared by blending gelatin with MMT in aqueous solution. Methods: PTX was incorporated into the nanocomposite preparation. The nanocomposites were investigated by Fourier Transmission Infra Red Spectroscopy (FT-IR), Differential Scanning Calorimetry (DSC), Scanning Electron Microscope (SEM) X-Ray Diffraction (XRD) and Confocal Laser Microscopy (CLSM). FT-IR of nanocomposite showed the disappearance of all major peaks which corroborated the formation of nanocomposites. The nanocomposites were found to have a particle size of 121.9 ± 1.85 nm and zeta potential -12.1 ± 0.63 mV. DSC thermogram of drug loaded nanocomposites indicated peak at 117.165 oC and 205.816 oC, which clearly revealed that the drug has been incorporated into the nanocomposite because of cross-linking of cloisite 30 B and gelatin in the presence of glutaraldehyde. Results: SEM images of gelatin show a network like structure which disappears in the nanocomposite. The kinetics of the drug release was studied in order to ascertain the type of release mechanism. The drug release from nanocomposites was in a controlled manner, followed by first-order kinetics and the drug release mechanism was found to be of Fickian type. Conclusion: Ex vivo gut permeation studies revealed 4 times enhancement in the permeation of drug present in the nanocomposite as compared to plain drug solution and were further affirmed by CLSM. Thus, gelatin/(MMT) nanocomposite could be promising for the oral delivery of PTX in cancer therapy and future prospects for the industrial pharmacy.

scholarly journals Formulation and development of metformin-loaded microspheres using Khaya senegalensis (Meliaceae) gum as co-polymer

2020 ◽  
Vol 6 (1) ◽  
Author(s):  
Chukwuebuka H. Ozoude ◽  
Chukwuemeka P. Azubuike ◽  
Modupe O. Ologunagba ◽  
Sejoro S. Tonuewa ◽  
Cecilia I. Igwilo
Keyword(s):  
Controlled Release ◽  
Sodium Alginate ◽  
Release Kinetics ◽  
Drug Carrier ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Metformin Hydrochloride ◽  
Scanning Calorimetry ◽  
Khaya Senegalensis

Abstract Background Khaya gum is a bark exudate from Khaya senegalensis (Maliaecae) that has drug carrier potential. This study aimed to formulate and comparatively evaluate metformin-loaded microspheres using blends of khaya gum and sodium alginate. Khaya gum was extracted and subjected to preformulation studies using established protocols while three formulations (FA; FB and FC) of metformin (1% w/v)-loaded microspheres were prepared by the ionic gelation method using 5% zinc chloride solution as the cross-linker. The formulations contained 2% w/v blends of khaya gum and sodium alginate in the ratios of 2:3, 9:11, and 1:1, respectively. The microspheres were evaluated by scanning electron microscopy, Fourier transform-infrared spectroscopy, differential scanning calorimetry, entrapment efficiency, swelling index, and in vitro release studies. Results Yield of 28.48%, pH of 4.00 ± 0.05, moisture content (14.59% ± 0.50), and fair flow properties (Carr’s index 23.68 ± 1.91 and Hausner’s ratio 1.31 ± 0.03) of the khaya gum were obtained. FTIR analyses showed no significant interaction between pure metformin hydrochloride with excipients. Discrete spherical microspheres with sizes ranging from 1200 to 1420 μm were obtained. Drug entrapment efficiency of the microspheres ranged from 65.6 to 81.5%. The release of the drug from microspheres was sustained for the 9 h of the study as the cumulative release was 62% (FA), 73% (FB), and 80% (FC). The release kinetics followed Korsmeyer-Peppas model with super case-II transport mechanism. Conclusion Blends of Khaya senegalensis gum and sodium alginate are promising polymer combination for the preparation of controlled-release formulations. The blend of the khaya gum and sodium alginate produced microspheres with controlled release properties. However, the formulation containing 2:3 ratio of khaya gum and sodium alginate respectively produced microspheres with comparable controlled release profiles to the commercial brand metformin tablet.

scholarly journals Eudragit S-100 coated sodium alginate microspheres of naproxen sodium: Formulation, optimization and in vitro evaluation / Alginatne mikrosfere naproksen natrija obložene Eudragitom S-100: Priprava, optimizacija i in vitro vrednovanje

2012 ◽  
Vol 62 (4) ◽  
pp. 529-545 ◽  
Author(s):  
Anuj Chawla ◽  
Pooja Sharma ◽  
Pravin Pawar
Keyword(s):  
Drug Release ◽  
Sodium Alginate ◽  
Naproxen Sodium ◽  
Drug Loading ◽  
Size Analysis ◽  
Scanning Calorimetry ◽  
Sem Images ◽  
S 100 ◽  
Eudragit S 100

The aim of the study was to prepare site specific drug delivery of naproxen sodium using sodium alginate and Eudragit S-100 as a mucoadhesive and pH-sensitive polymer, respectively. Core microspheres of alginate were prepared by a modified emulsification method followed by cross-linking with CaCl2, which was further coated with the pH dependent polymer Eudragit S-100 (2.5 or 5 %) to prevent drug release in the upper gastrointestinal environment. Microspheres were characterized by FT-IR spectroscopy, X-ray diffraction, differential scanning calorimetry and evaluated by scanning electron microscopy, particle size analysis, drug loading efficiency, in vitro mucoadhesive time study and in vitro drug release study in different simulated gastric fluids. Stability studies of the optimized formulation were carried out for 6 months. SEM images revealed that the surface morphology was rough and smooth for core and coated microspheres, respectively. Core microspheres showed better mucoadhesion compared to coated microspheres when applied to the mucosal surface of freshly excised goat colon. The optimized batch of core microspheres and coated microspheres exhibited 98.42 ± 0.96 and 95.58 ± 0.74 % drug release, respectively. Drug release from all sodium alginate microsphere formulations followed Higuchi kinetics. Moreover, drug release from Eudragit S-100 coated microspheres followed the Korsmeyer-Peppas equation with a Fickian kinetics mechanism. Stability study suggested that the degradation rate constant of microspheres was minimal, indicating 2 years shelf life of the formulation.

scholarly journals Development, Characterization, Stability and Bioaccessibility Improvement of 7,8-Dihydroxyflavone Loaded Zein/Sophorolipid/Polysaccharide Ternary Nanoparticles: Comparison of Sodium Alginate and Sodium Carboxymethyl Cellulose

Foods ◽  
2021 ◽  
Vol 10 (11) ◽  
pp. 2629
Author(s):  
Yufeng Chen ◽  
Jingchong Peng ◽  
Yueqi Wang ◽  
Daniel Wadhawan ◽  
Lijun Wu ◽  
...  
Keyword(s):  
Sodium Alginate ◽  
Carboxymethyl Cellulose ◽  
Electrostatic Interactions ◽  
Storage Stability ◽  
Amorphous State ◽  
Sodium Carboxymethyl Cellulose ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
In Vitro Bioaccessibility

In this study, two polysaccharides [sodium alginate (ALG) and sodium carboxymethyl cellulose (CMC)] were selected to establish zein/sophorolipid/ALG (ALG/S/Z) and zein/sophorolipid/ALG (CMC/S/Z) nanoparticles to encapsulate 7,8-dihydroxyflavone (7,8-DHF), respectively. The results showed that polysaccharide types significantly affected performance of ternary nanoparticles, including CMC/S/Z possessed lower polydispersity index, particle size and turbidity, but higher zeta potential, encapsulation efficiency and loading capacity compared to ALG/S/Z. Compared to zein/sophorolipid nanoparticles (S/Z), both ALG/S/Z and CMC/S/Z had better stability against low pH (pH 3~4) and high ionic strengths (150~200 mM NaCl). Hydrophobic effects, electrostatic interactions and hydrogen bonding were confirmed in ternary nanoparticles fabrication via Fourier-transform infrared spectroscopy. Circular dichroism revealed that CMC and ALG had no evident impact on secondary structure of zein in S/Z, but changed surface morphology of S/Z as observed by scanning electron microscope. Encapsulated 7,8-DHF exhibited an amorphous state in ternary nanoparticles as detected by X-ray diffraction and differential scanning calorimetry. Furthermore, compared to S/Z, ALG/S/Z, and CMC/S/Z remarkably improved the storage stability and bioaccessibility of 7,8-DHF. CMC/S/Z possessed a greater storage stability for 7,8-DHF, however, ALG/S/Z exhibited a better in vitro bioaccessibility of 7,8-DHF. This research provides a theoretical reference for zein-based delivery system application.

scholarly journals In vitro Complexation of Olmesartan Medoxomil with Dapagliflozin, Vildagliptin and Metformin

2019 ◽  
Vol 18 (2) ◽  
pp. 271-280 ◽  
Author(s):  
Fahima Aktar ◽  
Md Zakir Sultan ◽  
Mohammad A Rashid
Keyword(s):  
Drug Interactions ◽  
Thermo Gravimetric Analysis ◽  
Olmesartan Medoxomil ◽  
Therapeutic Agents ◽  
Gravimetric Analysis ◽  
Thermochemical Properties ◽  
Scanning Calorimetry ◽  
Thermo Gravimetric ◽  
Ft Ir

Drug-drug interactions have been a serious concern for pharmacokinetics, pharmacodynamics and pharmacological profiles of therapeutic agents. The aim of this study was to carry out interactions of olmesartan medoxomil with dapagliflozin, vildagliptin and metformin, which were confirmed by TLC, HPLC and FT-IR. The newly formed complexes showed characteristic thermochemical properties in differential scanning calorimetry (DSC) and thermo gravimetric analysis (TGA). In TLC, three spots from the three complexes were found to be different from their precursor drugs. In HPLC chromatograms, the Rt (retention time) of the pure olmesartan medoxomil, dapagliflozin, vildagliptin and metformin were found to be different from their respective complexes. The FT-IR spectra obtained for drug-drug interactions were seen to demonstrate new pattern of peaks compared to pure drugs. The DSC and TGA thermograms of olmesartan medoxomil, dapagliflozin, vildagliptin and metformin were also found to be different from their complexes. All these variations from parent compounds indicated the formation of new complexes. Dhaka Univ. J. Pharm. Sci. 18(2): 271-180, 2019 (December)

Design and Development of Mupirocin Nanofibers as Medicated Textiles for Treatment of Wound Infection in Secondary Burns

2021 ◽  
Vol 14 (6) ◽  
pp. 5672-5682
Author(s):  
Ruchi Tiwari ◽  
Akanksha Lahiri ◽  
Gaurav Tiwari ◽  
Ramachandran Vadivelan
Keyword(s):  
High Stability ◽  
Solvent Casting ◽  
Topical Drug Delivery ◽  
Stability Studies ◽  
Scanning Calorimetry ◽  
Electrospinning Technique ◽  
Ir Studies ◽  
Permeation Studies ◽  
Ft Ir

The present study assessed the topical potential of nanofibers loaded with Mupirocin (MUP) for the treatment of burns. Nanofibers of MUP were composed of Polyvinyl Pyrrolidone (PVP), Gelatin Type-A, and Ethanol using two methods: Solvent casting and Electrospinning. Nanofibers were characterized for Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), Differential scanning calorimetry (DSC), Thermogravimetric analysis (TGA), Drug Content Studies, in-vitro drug permeation, antibacterial and stability studies. The FT-IR studies showed that the Electrospinning technique had a very good mixing of MUP with the polymer. SEM studies showed that the morphology of electrospinning nanofibers had diameters in the range of 70.41 nm- 406.83 nm. The thermal decomposition studies of optimized Nanofiber (E.S.1) were performed by DSC and TGA study and it was found that the formulation had high stability in high-temperature environments. Permeation studies showed that E.S.1 had the highest percentage amount and controlled release of the drug (90 %) up to 8 has compared to other formulations. Nanofibers prepared through the Electrospinning technique showed better antibacterial activity against Staphylococcus aureus as compared to the Solvent casting nanofibers. This research suggested that MUP loaded nanofibers can be potentially used as a topical drug delivery system for the treatment of burns. 

Evaluation of the bioactive properties of Alternanthera sessilis extract and development of sodium alginate – Alternanthera sessilis membrane for wound management

2020 ◽  
Vol 40 (6) ◽  
pp. 507-518
Author(s):  
Ramaswamy Rajendran ◽  
Mariappan Abirami ◽  
Elango Santhini ◽  
Selvaraj Dinesh Kirupha ◽  
Ketankumar Vadodaria
Keyword(s):  
Antibacterial Activity ◽  
Sodium Alginate ◽  
Biomedical Applications ◽  
Ethanolic Extract ◽  
Wound Management ◽  
Alternanthera Sessilis ◽  
High Antibacterial Activity ◽  
Swelling Characteristics ◽  
Antioxidant And Antimicrobial Activity

AbstractMany herbal/botanical medicines from plant sources are being used for therapeutic purpose. Alternanthera sessilis sp. plant leaves are known for their phytochemical constituents, which have potent antibacterial activity. In the present study, the properties of the A. sessilis sp. extract and the biocomposite membrane of A. sessilis sp. with sodium alginate were studied for their biomedical applications. Results showed that the A. sessilis ethanoic extract possessed high levels of antioxidant and antimicrobial activity and no cytotoxic effect under in vitro conditions. Similarly, the biocomposite membrane of alginate with the A. sessilis sp. ethanolic extract showed high antibacterial activity with hemocompatibility and swelling characteristics. Although the antioxidant, antimicrobial and cytotoxic effects of A. sessilis have been previously reported, this is the first report on the preparation of a biocomposite membrane with alginate using A. sessilis for biomedical applications.

scholarly journals Preparation, Characterization, and Acetylcholinesterase Inhibitory Ability of the Inclusion Complex of β-Cyclodextrin–Cedar (Juniperus phoenicea) Essential Oil

Micro ◽  
2021 ◽  
Vol 1 (2) ◽  
pp. 250-266
Author(s):  
Eleni Kavetsou ◽  
Ioanna Pitterou ◽  
Annita Katopodi ◽  
Georgia Petridou ◽  
Abdelaziz Adjali ◽  
...  
Keyword(s):  
Essential Oil ◽  
In Vitro Release ◽  
Release Profile ◽  
Acetylcholinesterase Inhibition ◽  
Precipitation Method ◽  
Scanning Calorimetry ◽  
Juniperus Phoenicea ◽  
Ft Ir ◽  
Co Precipitation

The aim of the present study was the encapsulation of cedar (Juniperus phoenicea) essential oil (CEO) of Greek origin in β-cyclodextrin (β-CD) through the formation of inclusion complexes (ICs) using the co-precipitation method with different β-CD-to-CEO weight ratios (90:10, 85:15, 80:20, 70:30 (w/w)). The encapsulation of CEO in β-CD through host–guest interactions was confirmed by Nuclear Magnetic Resonance (NMR) spectroscopy, FT-IR spectroscopy, Differential Scanning Calorimetry (DSC) and Thermogravimetric Analysis (TGA). The obtained ICs exhibited nanoscale size (315.9 nm to 769.6 nm),Polydispersity Index from 0.326 to 0.604 and satisfactory stability in suspension (−37.0 mV to −17.0 mV). The process yield was satisfactory, ranging between 65% and 78%, while the inclusion efficiency ranged from 10% to 27%. The in vitro release study conducted for the IC with the optimal characteristics (β-CD:CEO 80:20 (w/w)) exhibited a sustained release profile, with an initial burst effect in the first 5 h. The release profile could be well expressed by the Higuchi equation: Q = 18.893 t1/2 + 9.5919, R2 = 0.8491. The cedar EO presented significant acetylcholinesterase inhibition (IC50 37 μg/mL), which was prolonged by its encapsulation into the β-CD cavity.

scholarly journals Consequence of ANASTROZOLE on Chemo therapy

2017 ◽  
Vol 1 (2) ◽  
pp. 01-04
Author(s):  
Saritha Garrepalli
Keyword(s):  
Particle Size ◽  
In Vitro Release ◽  
Scanning Calorimetry ◽  
Ir Studies ◽  
Release Studies ◽  
Ft Ir ◽  
The Mean ◽  
Pure Drug ◽  
The Stability

Prepared nanoparticles were characterized in terms of particle size, scanning electron microscope (SEM), fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC). In-vitro release studies were performed in phosphate buffer saline pH 7.4 at 37˚±0.5˚C for 1month. The mean particle size of obtained nanoparticles was 150-400 nm and was apparently spherical in shape, with smooth surface. DSC is done for the stability test for pure drug and sample. The thermogram of drug has not shifted for in the formulation compare to pure drug thermogram hence, the stability of formulation is not changed. FT-IR studies demonstrated that the drug was not changed in the formulation during the fabrication process.The encapsulation efficiency was about 48%. The Anastrozole-BSA nanoparticles exhibit a most interesting release profile with small initial burst followed by slower and controlled release.

Sign in / Sign up

Export Citation Format

Share Document