A compact four-element MIMO antenna based on HMSIW slot antenna

2017 ◽  
Author(s):  
Ming Wei ◽  
Hu Liu ◽  
Tao Wan ◽  
Ying Liu
Keyword(s):  
Slot Antenna ◽  
Mimo Antenna

scholarly journals 4 × 4 MIMO Antenna System for Smart Eyewear in Wi-Fi 5G and Wi-Fi 6e Wireless Communication Applications

Electronics ◽  
2021 ◽  
Vol 10 (23) ◽  
pp. 2936
Author(s):  
Ming-An Chung ◽  
Cheng-Wei Hsiao ◽  
Chih-Wei Yang ◽  
Bing-Ruei Chuang
Keyword(s):  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Slot Antenna ◽  
Actual Measurement ◽  
Antenna Efficiency ◽  
Mimo Antenna ◽  
Measurement Results ◽  
Working Frequency ◽  
Peak Gain

This paper proposes a small-slot antenna system (50 mm × 9 mm × 2.7 mm) for 4 × 4 multiple-input multiple-output (MIMO) on smart glasses devices. The antenna is set on the plastic temple, and the inverted F antenna radiates through the slot in the ground plane of the sputtered copper layer outside the temple. Two symmetrical antennas and slots on the same temple and series capacitive elements enhance the isolation between the two antenna ports. When both temples are equipped with the proposed antennas, 4 × 4 MIMO transmission can be achieved. The antenna substrate is made of polycarbonate (PC), and its thickness is 2.7 mm εr=2.85, tanδ=0.0092. According to the actual measurement results, this antenna has two working frequency bands when the reflection coefficient is lower than −10dB, its working frequency bandwidth at 4.58–5.72 GHz and 6.38–7.0 GHz. The proposed antenna has a peak gain of 4.3 dBi and antenna efficiency of 85.69% at 5.14 GHz. In addition, it also can obtain a peak gain of 3.3 dBi and antenna efficiency of 82.78% at 6.8 GHz. The measurement results show that this antenna has good performance, allowing future smart eyewear devices to be applied to Wi-Fi 5G (5.18–5.85 GHz) and Wi-Fi 6e (5.925–7.125 GHz).

scholarly journals Multiband MIMO Antenna System with Parasitic Elements for WLAN and WiMAX Application

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
Reza Karimian ◽  
Hamed Tadayon
Keyword(s):  
Return Loss ◽  
Ground Plane ◽  
Antenna System ◽  
Slot Antenna ◽  
Antenna Structure ◽  
Mimo Antenna ◽  
Measurement Result ◽  
Array Configuration ◽  
Element Array ◽  
Microstrip Feed

A new microstrip slot antenna with parasitic elements has been presented in this paper. The proposed antenna is composed of a microstrip feed line, a ground plane on which some simple slots are etched, and parasitic elements. Simulation results show that the antenna structure allows for the independent adjustment of each frequency. A two-element array configuration of this antenna for MIMO application is investigated as well. For comparison between simulation and measurement result both single and array configurations have been fabricated. The measurement result exhibits good radiation performance in terms of return loss, low mutual coupling, and compactness.

scholarly journals Dual-Band, Dual-Polarized Two Element Slot Antenna for Fifth Generation Mobile Devices

2021 ◽  
Vol 12 (3) ◽  
pp. 4822-4830
Author(s):  
Jitendra Vaswani
Keyword(s):  
Mobile Devices ◽  
Radiation Pattern ◽  
Cost Effective ◽  
User Equipment ◽  
Dual Band ◽  
Slot Antenna ◽  
Dual Polarization ◽  
Mimo Antenna ◽  
Fifth Generation ◽  
Dual Polarized

This paper presents a two-element dual-band MIMO antenna with dual-polarization for 5G user equipment. Both operating frequencies are of sub-6 GHz band centered at 3.6 GHz and 5.5 GHz respectively and are independent of each other. Antenna polarizations depend on the placement of the feed elements on the PCB. The antenna is designed on FR-4 substrate to ensure its easy availability and keeping it cost-effective. The resultant radiation pattern of the antenna set is bi-directional with good gain and efficiency.

5G/B5G Internet of Things MIMO Antenna Design

Signals ◽  
2022 ◽  
Vol 3 (1) ◽  
pp. 29-37
Author(s):  
Muhammad Ikram
Keyword(s):  
Internet Of Things ◽  
Wireless Communication ◽  
Communication Systems ◽  
Antenna Design ◽  
Slot Antenna ◽  
Fourth Generation ◽  
Mimo Antenna ◽  
Fifth Generation ◽  
Sixth Generation ◽  
Multiple Input

The current and future wireless communication systems, WiFi, fourth generation (4G), fifth generation (5G), Beyond5G, and sixth generation (6G), are mixtures of many frequency spectrums. Thus, multi-functional common or shared aperture antenna modules, which operate at multiband frequency spectrums, are very desirable. This paper presents a multiple-input and multiple-output (MIMO) antenna design for the 5G/B5G Internet of Things (IoT). The proposed MIMO antenna is designed to operate at multiple bands, i.e., at 3.5 GHz, 3.6 GHz, and 3.7 GHz microwave Sub-6 GHz and 28 GHz mm-wave bands, by employing a single radiating aperture, which is based on a tapered slot antenna. As a proof of concept, multiple tapered slots are placed on the corner of the proposed prototype. With this configuration, multiple directive beams pointing in different directions have been achieved at both bands, which in turn provide uncorrelated channels in MIMO communication. A 3.5 dBi realized gain at 3.6 GHz and an 8 dBi realized gain at 28 GHz are achieved, showing that the proposed design is a suitable candidate for multiple wireless communication standards at Sub-6 GHz and mm-wave bands. The final MIMO structure is printed using PCB technology with an overall size of 120 × 60 × 10 mm3, which matches the dimensions of a modern mobile phone.

scholarly journals Design of Ultra-Wideband MIMO Antenna for Breast Tumor Detection

2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
Liting Wang ◽  
Bin Huang
Keyword(s):  
Cancer Detection ◽  
Breast Tumor ◽  
Mutual Coupling ◽  
Microstrip Line ◽  
Breast Cancer Detection ◽  
Imaging Systems ◽  
Ultra Wideband ◽  
Slot Antenna ◽  
Mimo Antenna ◽  
Measurement Results

A MIMO antenna composed by microstrip line-fed circular slot antenna is proposed. This antenna is used in ultra-wideband microwave imaging systems aimed for early breast cancer detection. The antenna is designed to operate across the ultra-wideband frequency band in the air. The mutual coupling between the antenna elements has been investigated to be low enough for MIMO medical imaging applications. Both the simulation and measurement results are shown to illustrate the performances of the proposed antenna.

Investigation of 10-port coupled fed slotted MIMO antenna system for 5G mobile handset

2021 ◽  
pp. 1-14
Author(s):  
D. Rajesh Kumar ◽  
G. Venkat Babu ◽  
K.G. Sujanth Narayan ◽  
N. Raju
Keyword(s):  
Antenna Array ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Circuit Board ◽  
Dual Band ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Mimo Antenna ◽  
Diversity Techniques

Abstract A dual-band 10-port multiple input multiple output (MIMO) antenna array for 5G smartphone is proposed. Each antenna in the MIMO system can work from 3.4 to 3.6 GHz and 5 to 6 GHz with 10 dB (2:1 VSWR) impedance bandwidth. Nevertheless, for a 3:1 VSWR, the antenna operates from 3.3 to 3.8 GHz and 4.67 to 6.24 GHz. The MIMO system is formed by making 10 seven-shaped coupled fed slot antenna elements excited at two different resonant modes and integrated into the system circuit board. By implementing the spatial and polarization diversity techniques, high isolation better than 28 dB between any pair of antenna elements is achieved. The proposed 10-port MIMO antenna array is fabricated and measured. Significant radiation efficiency is obtained, ranging from 65 to 82% for both bands. The antenna gain in the required operating band is substantial, around 3–3.8 dBi. Further, the MIMO parameters such as envelope correlation co-efficient, channel capacity, and total active reflection co-efficient are calculated. The antenna's robustness is estimated by analyzing the user hand effects and specific absorption rate (SAR). The measured results are well agreed with the simulated results.

scholarly journals Multi-Band MIMO Antenna Design with User-Impact Investigation for 4G and 5G Mobile Terminals

Sensors ◽  
2019 ◽  
Vol 19 (3) ◽  
pp. 456 ◽  
Author(s):  
Naser Ojaroudi Parchin ◽  
Haleh Jahanbakhsh Basherlou ◽  
Yasir I. A. Al-Yasir ◽  
Atta Ullah ◽  
Raed A. Abd-Alhameed ◽  
...  
Keyword(s):  
Printed Circuit Board ◽  
Multiple Input Multiple Output ◽  
Circuit Board ◽  
Slot Antenna ◽  
Fourth Generation ◽  
Impedance Bandwidth ◽  
Single Element ◽  
Mobile Terminals ◽  
Mimo Antenna ◽  
Multi Band

In this study, we propose a design of a multi-band slot antenna array applicable for fourth-generation (4G) and fifth-generation (5G) smartphones. The design is composed of double-element square-ring slot radiators fed by microstrip-line structures for easy integration with radio frequency (RF)/microwave circuitry. The slot radiators are located on the corners of the smartphone printed circuit board (PCB) with an overall dimension of 75 × 150 mm2. The proposed multiple-input multiple-output (MIMO) antenna is designed to meet the requirements of 4G and 5G mobile terminals with essential bandwidth for higher data rate applications. For −10 dB impedance bandwidth, each single-element of the proposed MIMO design can cover the frequency ranges of 2.5–2.7 GHz (long-term evolution (LTE) 2600), 3.45–3.8 GHz (LTE bands 42/43), and 5.00–5.45 GHz (LTE band 46). However, for −6 dB impedance bandwidth, the radiation elements cover the frequency ranges of 2.45–2.82 GHz, 3.35–4.00 GHz, and 4.93–5.73 GHz. By employing the microstrip feed lines at the four different sides of smartphone PCB, the isolation of the radiators has been enhanced and shows better than 17 dB isolation levels over all operational bands. The MIMO antenna is implemented on an FR-4 dielectric and provides good properties including S-parameters, efficiency, and radiation pattern coverage. The performance of the antenna is validated by measurements of the prototype. The simulation results for user-hand/user-head impacts and specific absorption rate (SAR) levels of the antenna are discussed, and good results are achieved. In addition, the antenna elements have the potential to be used as 8-element/dual-polarized resonators.

Sign in / Sign up

Export Citation Format

Share Document