scholarly journals Multi-Band MIMO Antenna Design with User-Impact Investigation for 4G and 5G Mobile Terminals

Sensors ◽  
2019 ◽  
Vol 19 (3) ◽  
pp. 456 ◽  
Author(s):  
Naser Ojaroudi Parchin ◽  
Haleh Jahanbakhsh Basherlou ◽  
Yasir I. A. Al-Yasir ◽  
Atta Ullah ◽  
Raed A. Abd-Alhameed ◽  
...  
Keyword(s):  
Printed Circuit Board ◽  
Multiple Input Multiple Output ◽  
Circuit Board ◽  
Slot Antenna ◽  
Fourth Generation ◽  
Impedance Bandwidth ◽  
Single Element ◽  
Mobile Terminals ◽  
Mimo Antenna ◽  
Multi Band

In this study, we propose a design of a multi-band slot antenna array applicable for fourth-generation (4G) and fifth-generation (5G) smartphones. The design is composed of double-element square-ring slot radiators fed by microstrip-line structures for easy integration with radio frequency (RF)/microwave circuitry. The slot radiators are located on the corners of the smartphone printed circuit board (PCB) with an overall dimension of 75 × 150 mm2. The proposed multiple-input multiple-output (MIMO) antenna is designed to meet the requirements of 4G and 5G mobile terminals with essential bandwidth for higher data rate applications. For −10 dB impedance bandwidth, each single-element of the proposed MIMO design can cover the frequency ranges of 2.5–2.7 GHz (long-term evolution (LTE) 2600), 3.45–3.8 GHz (LTE bands 42/43), and 5.00–5.45 GHz (LTE band 46). However, for −6 dB impedance bandwidth, the radiation elements cover the frequency ranges of 2.45–2.82 GHz, 3.35–4.00 GHz, and 4.93–5.73 GHz. By employing the microstrip feed lines at the four different sides of smartphone PCB, the isolation of the radiators has been enhanced and shows better than 17 dB isolation levels over all operational bands. The MIMO antenna is implemented on an FR-4 dielectric and provides good properties including S-parameters, efficiency, and radiation pattern coverage. The performance of the antenna is validated by measurements of the prototype. The simulation results for user-hand/user-head impacts and specific absorption rate (SAR) levels of the antenna are discussed, and good results are achieved. In addition, the antenna elements have the potential to be used as 8-element/dual-polarized resonators.

Investigation of 10-port coupled fed slotted MIMO antenna system for 5G mobile handset

2021 ◽  
pp. 1-14
Author(s):  
D. Rajesh Kumar ◽  
G. Venkat Babu ◽  
K.G. Sujanth Narayan ◽  
N. Raju
Keyword(s):  
Antenna Array ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Circuit Board ◽  
Dual Band ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Mimo Antenna ◽  
Diversity Techniques

Abstract A dual-band 10-port multiple input multiple output (MIMO) antenna array for 5G smartphone is proposed. Each antenna in the MIMO system can work from 3.4 to 3.6 GHz and 5 to 6 GHz with 10 dB (2:1 VSWR) impedance bandwidth. Nevertheless, for a 3:1 VSWR, the antenna operates from 3.3 to 3.8 GHz and 4.67 to 6.24 GHz. The MIMO system is formed by making 10 seven-shaped coupled fed slot antenna elements excited at two different resonant modes and integrated into the system circuit board. By implementing the spatial and polarization diversity techniques, high isolation better than 28 dB between any pair of antenna elements is achieved. The proposed 10-port MIMO antenna array is fabricated and measured. Significant radiation efficiency is obtained, ranging from 65 to 82% for both bands. The antenna gain in the required operating band is substantial, around 3–3.8 dBi. Further, the MIMO parameters such as envelope correlation co-efficient, channel capacity, and total active reflection co-efficient are calculated. The antenna's robustness is estimated by analyzing the user hand effects and specific absorption rate (SAR). The measured results are well agreed with the simulated results.

scholarly journals High gain 5G MIMO antenna for mobile base station

2019 ◽  
Vol 9 (1) ◽  
pp. 468 ◽  
Author(s):  
Yusnita Rahayu ◽  
Indah Permata Sari ◽  
Dara Incam Ramadhan ◽  
Razali Ngah
Keyword(s):  
Linear Array ◽  
Multiple Input Multiple Output ◽  
High Gain ◽  
Base Station ◽  
Impedance Bandwidth ◽  
Single Element ◽  
Mimo Antenna ◽  
Input Multiple Output ◽  
Mobile Base Station ◽  
Mobile Base

This article presented a millimeter wave antenna which operated at 38 GHz for 5G mobile base station. The MIMO (Multiple Input Multiple Output) antenna consisted of 1x10 linear array configurations. The proposed antenna’s size was 88 x 98 mm^2  and printed on 1.575 mm-thick Rogers Duroid 5880 subsrate with dielectric constant of ε_r= 2.2 and loss tangent (tanδ) of 0.0009. The antenna array covered along the azimuth plane to provide the coverage to the users in omnidirection. The simulated results showed that the single element antenna had the reflection coefficient (S11) of -59 dB, less than -10 dB in the frequency range of 35.5 - 39.6 GHz. More than 4.1 GHz of impedance bandwidth was obtained. The gain of the antenna linear array was 17.8 dBi while the suppression of the side lobes was -2.7 dB.  It showed a high array gain throughout the impedance bandwidth with overall of VSWR were below 1.0646. It designed using CST microwave studio.

scholarly journals Mobile-Phone Antenna Array with Diamond-Ring Slot Elements for 5G Massive MIMO Systems

Electronics ◽  
2019 ◽  
Vol 8 (5) ◽  
pp. 521 ◽  
Author(s):  
Naser Ojaroudi Parchin ◽  
Haleh Jahanbakhsh Basherlou ◽  
Mohammad Alibakhshikenari ◽  
Yasser Ojaroudi Parchin ◽  
Yasir I. A. Al-Yasir ◽  
...  
Keyword(s):  
Mobile Phone ◽  
Antenna Array ◽  
Massive Mimo ◽  
Printed Circuit Board ◽  
High Efficiency ◽  
Mimo Systems ◽  
Circuit Board ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Diamond Ring

A design of mobile-phone antenna array with diamond-ring slot elements is proposed for fifth generation (5G) massive multiple-input/multiple-output (MIMO) systems. The configuration of the design consists of four double-fed diamond-ring slot antenna elements placed at different corners of the mobile-phone printed circuit board (PCB). A low-cost FR-4 dielectric with an overall dimension of 75 × 150 mm2 is used as the design substrate. The antenna elements are fed by 50-Ohm L-shaped microstrip-lines. Due to the orthogonal placement of microstrip feed lines, the diamond-ring slot elements can exhibit the polarization and radiation pattern diversity characteristic. A good impedance bandwidth (S11 ≤ −10 dB) of 3.2–4 GHz has been achieved for each antenna radiator. However, for S11 ≤ −6 dB, this value is 3–4.2 GHz. The proposed design provides the required radiation coverage of 5G smartphones. The performance of the proposed MIMO antenna design is examined using both simulation and experiment. High isolation, high efficiency and sufficient gain-level characteristics have been obtained for the proposed MIMO smartphone antenna. In addition, the calculated total active reflection coefficient (TARC) and envelope correlation coefficient (ECC) of the antenna elements are very low over the whole band of interest which verify the capability of the proposed multi-antenna systems for massive MIMO and diversity applications. Furthermore, the properties of the design in Data-mode/Talk-mode are investigated and presented.

scholarly journals High Gain Triple-Band Metamaterial-Based Antipodal Vivaldi MIMO Antenna for 5G Communications

Micromachines ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 250
Author(s):  
Tale Saeidi ◽  
Idris Ismail ◽  
Sima Noghanian ◽  
Adam R. H. Alhawari ◽  
Qammer H. Abbasi ◽  
...  
Keyword(s):  
Printed Circuit Board ◽  
Multiple Input Multiple Output ◽  
High Gain ◽  
Radiation Efficiency ◽  
Circuit Board ◽  
Spiral Antenna ◽  
Mimo Antenna ◽  
High Isolation ◽  
Dual Polarized ◽  
Triple Band

This paper presents a miniaturized dual-polarized Multiple Input Multiple Output (MIMO) antenna with high isolation. The antenna meets the constraints of sub-6 GHz 5G and the smartphones’ X-band communications. A vertically polarized modified antipodal Vivaldi antenna and a horizontally polarized spiral antenna are designed and integrated, and then their performance is investigated. Three frequency bands of 3.8 GHz, 5.2 GHz, and 8.0 GHz are considered, and the proposed dual-polarized antenna is studied. High isolation of greater than 20 dB is obtained after integration of metamaterial elements, and without applying any other decoupling methods. The proposed triple-band metamaterial-based antenna has 1.6 GHz bandwidth (BW) (2.9 GHz–4.5 GHz), 13.5 dBi gain, and 98% radiation efficiency at 3.8 GHz. At 5.2 GHz it provides 1.2 GHz BW, 9.5 dBi gain, and 96% radiation efficiency. At 8.0 GHz it has 1 GHz BW, 6.75 dBi gain, and 92% radiation efficiency. Four antenna elements (with eight ports) were laid out orthogonally at the four corners of a mobile printed circuit board (PCB) to be utilized as a MIMO antenna for 5G communications. The performance of the MIMO antenna is examined and reported.

scholarly journals Design of a Compact UWB MIMO Antenna without Decoupling Structure

2018 ◽  
Vol 2018 ◽  
pp. 1-7 ◽  
Author(s):  
Yanjie Wu ◽  
Kang Ding ◽  
Bing Zhang ◽  
Jianfeng Li ◽  
Duolong Wu ◽  
...  
Keyword(s):  
Impedance Matching ◽  
Multiple Input Multiple Output ◽  
Monopole Antenna ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Mimo Antenna ◽  
High Isolation ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Mobile Handset

A compact high isolation ultrawideband (UWB) multiple-input-multiple-output (MIMO) antenna is designed. The proposed MIMO antenna consists of a rectangular monopole antenna and a slot antenna fed by two microstrip lines, respectively. To improve the impedance matching, a circular coupling structure is designed to feed the tapered slot antenna. The parasitic resonance introduced by the ground stub helps to extend the impedance bandwidth of monopole antenna at the upper UWB band. Commonly used complex decoupling or coupling structures are eliminated that endow the proposed antenna minimized foot print, which is preferred in mobile handset. Although without decoupling structure, high isolation is obtained between two antenna elements. Simulation and measurement verify the antenna’s desirable performance, showing a broad impedance bandwidth of 3.1–10.6 GHz with |S11| < −10 dB and |S21| < −20 dB over 3.4–10.6 GHz, and |S21| < −18 dB from 3.1–3.4 GHz.

Design of wideband orthogonal MIMO antenna with improved correlation using a parasitic element for mobile handsets

2014 ◽  
Vol 8 (1) ◽  
pp. 109-115 ◽  
Author(s):  
Ali Akdagli ◽  
Abdurrahim Toktas
Keyword(s):  
Radiation Pattern ◽  
Common Ground ◽  
Ground Plane ◽  
Circuit Board ◽  
Impedance Bandwidth ◽  
Strip Line ◽  
Mobile Terminals ◽  
Parasitic Element ◽  
Mimo Antenna ◽  
Novel Design

In this paper, a novel design of compact wideband multiple-input multiple-output (MIMO) antenna operating over a frequency range of 1.8–4.0 GHz at 10 dB is presented for mobile terminals. The MIMO antenna design consists of two symmetrical and orthogonal radiating elements with a small size of 15.5 × 16.5 mm2 printed on the corners of a mobile circuit board. The radiating element is composed of four meandered monopole branches with a strip-line fed by a probe. By triangularly trimming the corners of the common ground plane beneath the radiating elements, not only the mutual coupling is reduced, but also impedance bandwidth is increased. Although, the antenna in this form has sufficient correlation level between the radiating elements for MIMO operation, a novel design of plus-shaped parasitic element is inserted to the ground plane between those radiating elements in order to further enhance the isolation. The performance of the MIMO antenna is investigated in terms of s-parameters, radiation pattern, gain, envelope correlation coefficient (ECC), and total active reflection coefficient (TARC), and is verified through the measurements. The results demonstrate that the proposed MIMO antenna has good characteristics of wideband, isolation, gain, radiation pattern, and is compatible with LTE, WiMAX, and WLAN, besides it is small, compact, and embeddable in mobile terminals.

scholarly journals Ultra-Wideband Diversity MIMO Antenna System for Future Mobile Handsets

Sensors ◽  
2020 ◽  
Vol 20 (8) ◽  
pp. 2371 ◽  
Author(s):  
Naser Ojaroudi Parchin ◽  
Haleh Jahanbakhsh Basherlou ◽  
Yasir I. A. Al-Yasir ◽  
Ahmed M. Abdulkhaleq ◽  
Raed A. Abd-Alhameed
Keyword(s):  
Multiple Input Multiple Output ◽  
Circular Ring ◽  
Antenna System ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Single Element ◽  
Polarization Diversity ◽  
Mimo Antenna ◽  
Input Multiple Output ◽  
Dual Polarized

A new ultra-wideband (UWB) multiple-input/multiple-output (MIMO) antenna system is proposed for future smartphones. The structure of the design comprises four identical pairs of compact microstrip-fed slot antennas with polarization diversity function that are placed symmetrically at different edge corners of the smartphone mainboard. Each antenna pair consists of an open-ended circular-ring slot radiator fed by two independently semi-arc-shaped microstrip-feeding lines exhibiting the polarization diversity characteristic. Therefore, in total, the proposed smartphone antenna design contains four horizontally-polarized and four vertically-polarized elements. The characteristics of the single-element dual-polarized UWB antenna and the proposed UWB-MIMO smartphone antenna are examined while using both experimental and simulated results. An impedance bandwidth of 2.5–10.2 GHz with 121% fractional bandwidth (FBW) is achieved for each element. However, for S11 ≤ −6 dB, this value is more than 130% (2.2–11 GHz). The proposed UWB-MIMO smartphone antenna system offers good isolation, dual-polarized function, full radiation coverage, and sufficient efficiency. Besides, the calculated diversity performances of the design in terms of the envelope correlation coefficient (ECC) and total active reflection coefficient (TARC) are very low over the entire operating band.

Indoor channel characterization studies for V-band gigabit wireless communications using dielectric-loaded exponentially tapered slot antenna

2015 ◽  
Vol 8 (8) ◽  
pp. 1243-1251
Author(s):  
S. Ramesh ◽  
T. Rama Rao
Keyword(s):  
Wireless Communications ◽  
High Speed ◽  
Printed Circuit Board ◽  
Low Cost ◽  
Frequency Measurement ◽  
High Gain ◽  
Circuit Board ◽  
Slot Antenna ◽  
Single Element ◽  
60 Ghz

Demands for very high-speed wireless communication access is rapidly growing with respect to the increasing data rates for the use of rich multimedia content in various applications of defense, enterprise, industrial, and public domains. To serve these gigabit fidelity (Gi-Fi) uses for various wireless applications, millimeter wave (MmW) wireless technology with huge bandwidth in licensed/unlicensed bands is triggering boundless avenues. In this research, the concept of substrate-integrated waveguide (SIW) and exponentially tapered slot (ETS) antenna are used together design a high-gain, efficient planar dielectric-loaded antenna for MmW-based Gi-Fi wireless communications using unlicensed 60 GHz band in the MmW family. The SIW is used to feed the antenna and a dielectric is utilized increasing the gain. The dielectric-loaded ETS antenna and compact SIW feed are fabricated on a single substrate, resulting in low cost and easy fabrication utilizing printed circuit board process. The measured gain of single-element antenna is 11.4 dB, with radiation efficiency of 96.84% at 60 GHz. Then indoor radio wave propagation studies are carried out using elliptically dielectric-loaded ETS antenna with radio frequency measurement equipment to measure and model propagation channels at 60 GHz. The attained simulations are compared with the experimental results.

A compact dual port UWB-MIMO/diversity antenna for indoor application

2017 ◽  
Vol 10 (3) ◽  
pp. 360-367 ◽  
Author(s):  
Sonika Priyadarsini Biswal ◽  
Sushrut Das
Keyword(s):  
Mimo System ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Open Circuit ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Good Prospect ◽  
Mimo Antenna ◽  
Radiating Element ◽  
Input Multiple Output

A compact printed quadrant shaped monopole antenna is introduced in this paper as a good prospect for ultra wideband- multiple-input multiple-output (UWB-MIMO) system. The proposed MIMO antenna comprises two perpendicularly oriented monopoles to employ polarization diversity. An open circuit folded stub is extended from the ground plane of each radiating element to enhance the impedance bandwidth satisfying the UWB criteria. Two ‘L’ shaped slots are further etched on the radiator to provide good isolation performance between two radiators. The desirable radiator performances and diversity performances are ensured by simulation and/or measurement of the reflection coefficient, radiation pattern, realized peak gain, envelope correlation coefficient (ECC), diversity gain, mean effective gain (MEG) ratio and channel capacity loss (CCL). Results indicate that the proposed antenna exhibits 2.9–11 GHz 10 dB return loss bandwidth, mutual coupling <−20 dB, ECC < 0.003, MEG ratio ≈ 1, and CCL < 0.038 Bpsec/Hz, making it a good candidate for UWB and MIMO diversity application.

scholarly journals Minimization of Mutual Coupling Using Neutralization Line Technique for 2.4 GHz Wireless Applications

2015 ◽  
Vol 6 (3) ◽  
pp. 1-15 ◽  
Author(s):  
Wan Noor Najwa Wan Marzudi ◽  
Zuhairiah Zainal Abidin ◽  
Siti Zarina Mohd Muji ◽  
Yue Ma ◽  
Raed A. Abd-Alhameed
Keyword(s):  
Reflection Coefficient ◽  
Mutual Coupling ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Impedance Bandwidth ◽  
Mimo Antenna ◽  
Mimo Antennas ◽  
Wireless Applications ◽  
Input Multiple Output ◽  
Neutralization Line

This paper presented a planar printed multiple-input-multiple-output (MIMO) antenna with a dimension of 100 x 45 mm2. It composed of two crescent shaped radiators placed symmetrically with respect to the ground plane. Neutralization line applied to suppress mutual coupling. The proposed antenna examined both theoretically and experimentally, which achieves an impedance bandwidth of 18.67% (over 2.04-2.46 GHz) with a reflection coefficient < -10 dB and mutual coupling minimization of < -20 dB. An evaluation of MIMO antennas is presented, with analysis of correlation coefficient, total active reflection coefficient (TARC), capacity loss and channel capacity. These characteristics indicate that the proposed antenna suitable for some wireless applications.

Sign in / Sign up

Export Citation Format

Share Document