Microtensile Bond Strength and Interfacial Characterization of 11 Contemporary Adhesives Bonded to Bur-cut Dentin

2010 ◽  
Vol 35 (1) ◽  
pp. 94-104 ◽  
Author(s):  
M. Sarr ◽  
A. W. Kane ◽  
J. Vreven ◽  
A. Mine ◽  
K. L. Van Landuyt ◽  
...  
Keyword(s):  
Bond Strength ◽  
Chemical Bonding ◽  
Gold Standard ◽  
Clinical Relevance ◽  
Clinical Effectiveness ◽  
Microtensile Bond Strength ◽  
One Step ◽  
Self Etch

Clinical Relevance In the current study, contemporary adhesives are assessed mechanically and ultra-morphologically to predict clinical effectiveness. Adhesives with simplified application procedures (in particular, one-step self-etch adhesives) still underperform as compared to conventional “gold-standard” multi-step adhesives. “Mild” two-step self-etch adhesives that provide additional chemical bonding appear to most optimally combine bonding effectiveness with a simplified application protocol.

Increases in Dentin-bond Strength If Doubling Application Time of an Acetone-containing One-step Adhesive

10.2341/06-32 ◽  
2007 ◽  
Vol 32 (2) ◽  
pp. 133-137 ◽  
Author(s):  
M. Toledano ◽  
J. P. Proença ◽  
M. C. G. Erhardt ◽  
E. Osorio ◽  
F. S. Aguilera ◽  
...  
Keyword(s):  
Bond Strength ◽  
Clinical Relevance ◽  
Bonding Agent ◽  
Application Time ◽  
Microtensile Bond Strength ◽  
One Step ◽  
Self Etch

Clinical Relevance When treating dentin surfaces with Futurabond one-step self-etch bonding agent, in order to obtain higher microtensile bond strength, doubling the application time of the adhesive should be considered.

scholarly journals Microtensile Bond Strength of One- and Two-step Self-etching Adhesives on Sclerotic Dentin: The Effects of Thermocycling

2010 ◽  
Vol 35 (5) ◽  
pp. 547-555 ◽  
Author(s):  
C. Xie ◽  
Y. Han ◽  
X. Y. Zhao ◽  
Z. Y. Wang ◽  
H. M. He
Keyword(s):  
Bond Strength ◽  
Clinical Relevance ◽  
Adhesive Bonding ◽  
Microtensile Bond Strength ◽  
One Step ◽  
Self Etch

Clinical Relevance When compared with a two-step self-etching adhesive, the microtensile bond strength of a one-step self-etch adhesive bonding to both normal and sclerotic dentin was more affected by thermocycling.

scholarly journals Air-blowing strategies for improving the microtensile bond strength of one-step self-etch adhesives to root canal dentin

2020 ◽  
Vol 39 (5) ◽  
pp. 892-899 ◽  
Author(s):  
Kazuhide YONEKURA ◽  
Keiichi HOSAKA ◽  
Antonin TICHY ◽  
Keita TAGUCHI ◽  
Masaomi IKEDA ◽  
...  
Keyword(s):  
Bond Strength ◽  
Root Canal ◽  
Microtensile Bond Strength ◽  
Air Blowing ◽  
One Step ◽  
Root Canal Dentin ◽  
Self Etch

scholarly journals Durability of Enamel Bonding Using One-step Self-etch Systems on Ground and Unground Enamel

10.2341/08-58 ◽  
2009 ◽  
Vol 34 (2) ◽  
pp. 181-191 ◽  
Author(s):  
A. Reis ◽  
S. K. Moura ◽  
A. Pellizzaro ◽  
K. Dal-Bianco ◽  
A. M. Andrade ◽  
...  
Keyword(s):  
Bond Strength ◽  
Clinical Relevance ◽  
Water Storage ◽  
Adhesive System ◽  
One Step ◽  
Bond Strengths ◽  
Self Etch

Clinical Relevance The improvement of resin-enamel bond strengths after using Si-C paper and diamond burs for enamel preparation is material dependent. No degradation of enamel bond strength could be observed for any one-step self-etch adhesive system after 12 months of water storage.

scholarly journals Influence of Air Abrasion and Sonic Technique on Microtensile Bond Strength of One-Step Self-Etch Adhesive on Human Dentin

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Baraba Anja ◽  
Dukić Walter ◽  
Chieffi Nicoletta ◽  
Ferrari Marco ◽  
Sonja Pezelj Ribarić ◽  
...  
Keyword(s):  
Bond Strength ◽  
Testing Machine ◽  
Control Group ◽  
Air Abrasion ◽  
Microtensile Bond Strength ◽  
Dentin Surface ◽  
Significant Difference ◽  
Human Dentin ◽  
One Step ◽  
Self Etch

The purpose of thisin vitrostudy was to evaluate the microtensile bond strength of one-step self-etch adhesive to human dentin surface modified with air abrasion and sonic technique and to assess the morphological characteristics of the pretreated dentin surface. The occlusal enamel was removed to obtain a flat dentin surface for thirty-six human molar teeth. The teeth were randomly divided into three experimental groups (n= 12 per group), according to the pretreatment of the dentin: (1) control group, (2) air abrasion group, and (3) sonic preparation group. Microtensile bond strength test was performed on a universal testing machine. Two specimens from each experimental group were subjected to SEM examination. There was no statistically significant difference in bond strength between the three experimental groups (P> 0.05). Mean microtensile bond strength (MPa) values were 35.3 ± 12.8 for control group, 35.8 ± 13.5 for air abrasion group, and 37.7 ± 12.0 for sonic preparation group. The use of air abrasion and sonic preparation with one-step self-etch adhesive does not appear to enhance or impair microtensile bond strength in dentin.

Bond Strength and Quality of the Hybrid Layer of One-step Self-etch Adhesives Applied with Agitation on Dentin

2010 ◽  
Vol 35 (2) ◽  
pp. 211-219 ◽  
Author(s):  
R. C. Amaral ◽  
R. Stanislawczuk ◽  
C. Zander-Grande ◽  
D. Gagler ◽  
A. Reis ◽  
...  
Keyword(s):  
Bond Strength ◽  
Clinical Relevance ◽  
Adhesive Systems ◽  
Hybrid Layer ◽  
Dentin Surface ◽  
One Step ◽  
Self Etch ◽  
Excellent Tool

Clinical Relevance Vigorous application on the dentin surface is an excellent tool capable of improving the immediate performance of simplified self-etch adhesive systems.

scholarly journals Effect of Mode of Application on the Microtensile Bond Strength of a Self-etch and Etch-and-Rinse Adhesive System

2010 ◽  
Vol 35 (4) ◽  
pp. 428-435 ◽  
Author(s):  
A. Reis ◽  
C. Zander-Grande ◽  
S. Kossatz ◽  
R. Stanislawczuk ◽  
A. Manso ◽  
...  
Keyword(s):  
Bond Strength ◽  
Clinical Relevance ◽  
Water Storage ◽  
Adhesive System ◽  
Microtensile Bond Strength ◽  
Mode Of Application ◽  
Etch And Rinse ◽  
Self Etch

Clinical Relevance All Bond 3 and All Bond Self-Etch are versatile systems, capable of being used either in the full or simplified version. Both showed adequate microtensile bond strength results in enamel and dentin after 24 hours of water storage.

Effect of Multiple Consecutive Applications of One-step Self-etch Adhesive on Microtensile Bond Strength

2009 ◽  
Vol 10 (2) ◽  
pp. 67-74 ◽  
Author(s):  
Hacer Deniz Arisu ◽  
Hüma Ömürlü ◽  
Evrim Eligüzeloğlu ◽  
Mine Üçtaşli
Keyword(s):  
Bond Strength ◽  
Adhesive System ◽  
Microtensile Bond Strength ◽  
One Step ◽  
Group 3 ◽  
Group 2 ◽  
Adhesive Application ◽  
Self Etch ◽  
Group 1

Abstract Aim The aim of this study was to evaluate the effects of multiple consecutive coatings of a one-step self-etch adhesive system (Clearfil Tri-S Bond) on the microtensile bond strength (MBS) to dentin. Methods and Materials Nine caries-free human lower third molars were sectioned perpendicular to the long axis to expose the mid-coronal dentin. The teeth were separated into three experimental groups (n=3) according to the number of adhesive resin coats applied. In Group 1 one layer of Clearfil Tri-S Bond was applied according to the manufacturer's instructions. In Group 2 and Group 3 the adhesive was applied in two and three layers, respectively. In these two groups the first layer was applied according to the manufacturer's instructions but the second and third layers of adhesive were not light cured after application. After the placement of the composite, the teeth were sectioned to obtain approximately 1 mm2 beams for testing. Eighteen beams were prepared for each group using the ‘non-trimming’ method. The MBS values of all specimens were tested, and fracture modes were then determined using a stereomicroscope. Results The mean MBS values (in MPa) of Group 1 (one coat of the adhesive) was significantly lower (p=0.04) than those of Group 3 (three applied coats of the adhesive). There were no statistically significant differences between Groups 1 and 2 and Groups 2 and 3. Conclusion Within the limitations of this in vitro study the application of multiple coats of a one-step self-etch adhesive may provide an increase in bond strength compared to the application of only one coat of adhesive. Clinical Significance Three consecutive coats of one-step self-etching adhesive application can improve MBS. Citation Arisu HD, Eligüzeloğlu E, Üçtaşli M, Ömürlü H. Effect of Multiple Consecutive Applications of One-step Self-etch Adhesive on Microtensile Bond Strength. J Contemp Dent Pract 2009 March; (10)2:067-074.

Microtensile Bond Strength of Resin Composite Bonded to Caries-affected Dentin with Three Adhesives

10.2341/06-2 ◽  
2007 ◽  
Vol 32 (1) ◽  
pp. 24-30 ◽  
Author(s):  
H. Omar ◽  
W. El-Badrawy ◽  
O. El-Mowafy ◽  
O. Atta ◽  
B. Saleem
Keyword(s):  
Bond Strength ◽  
Clinical Relevance ◽  
Resin Composite ◽  
Microtensile Bond Strength ◽  
Self Etch

Clinical Relevance Compared to two other adhesives, a self-etch adhesive resulted in higher microtensile bond strength values when used to bond a resin composite to both sound and caries-affected dentin.

Sign in / Sign up

Export Citation Format

Share Document