scholarly journals Taurodontism and Van der Woude Syndrome

2008 ◽  
Vol 78 (5) ◽  
pp. 832-837 ◽  
Author(s):  
Hiroyuki Nawa ◽  
Snehlata Oberoi ◽  
Karin Vargervik
Keyword(s):  
Clinical Sample ◽  
Cone Beam Ct ◽  
Three Dimensional ◽  
Panoramic Radiograph ◽  
Cross Sectional Study ◽  
Cone Beam ◽  
Linear Measurements ◽  
Van Der Woude Syndrome ◽  
Cross Sectional ◽  
Mandibular First Molar

Abstract Objective: To report the occurrence of taurodontism in a clinical sample of Van der Woude syndrome (VWS) and describe its association with hypodontia and cleft type. Materials and Methods: This retrospective, cross-sectional study was carried out on chart reviews and radiographs of 13 persons with VWS. Mean age was 10 years 11 months ± 1 year 5 months. Panoramic radiographs were used to confirm the presence or absence of teeth and to measure crown body and root lengths of mandibular first molars. Three-dimensional cone beam computed tomography (CT) scans were available on two persons with VWS. Both volumetric and linear measurements were obtained. Results: The occurrence of taurodontism of the mandibular first molar was 35%: 27% hypodont and 8% mesodont. Of the 13 subjects with VWS, 6 (4 males and 2 females) had at least one tooth identified with taurodontism. Half of the cases were unilateral and half were bilateral, and all of the unilateral cases were on the left side. Five of the six subjects with taurodontism had missing incisors and premolars. Taurodontism was two times more frequent in those who were missing their second premolars than in those who had their second premolars. There was no correlation between cleft type and presence of taurodontism. The cone beam CT pilot study on two persons showed very abnormal morphology of both crown and roots, which was not apparent on the standard panoramic radiograph. Both the volumetric and linear measurements of the ratio of crown body to root were highly indicative of taurodontism. Further genetic studies are needed. Conclusion: There is a likely association between VWS and taurodontism.

scholarly journals Cone Beam CT Analysis of Haller Cells: Prevalence and Relationship with Orbital Floor Dehiscence

2021 ◽  
Author(s):  
Mahkameh Moshfeghi ◽  
hamidreza dehini ◽  
Mitra Ghazizadeh Ahsaie
Keyword(s):  
Cone Beam Ct ◽  
Cross Sectional Study ◽  
Cone Beam ◽  
Orbital Floor ◽  
Sectional Study ◽  
Chi Square ◽  
Cross Sectional ◽  
Ct Analysis ◽  
Bony Anatomy ◽  
Air Cells

Abstract Background and aim: Haller cells arise from anterior ethmoid air cells and are located in the medial orbital floor, lateral to the maxillary infundibulum. The aim of this cross-sectional study was to determine the prevalence of the Haller cells and its relationship with orbital floor dehiscence on cone beam CT images. Materials and Methods CBCT images of 120 patients were interpreted in coronal plane for the presence of Haller cells and orbital floor dehiscence. The prevalence of Haller cell, presence of dehiscence, unilateral or bilateral frequency were assessed. In addition, the size were categorized in three groups of small, medium and large. Chi-square and Cochran-Mantel-Haenszel tests were used for statistical analysis of the data and p<0.05 was considered to be significant. Results A total of 51 male and 69 female with Mean±SD age of 38.84±68.14 were assessed. The overall prevalence of Haller cells was 56.7%, of which 44 (64.7%) were unilateral and 24 were bilateral (35.3%). The majority of the cells (70.7%) were seen in medium (2-4mm) sized. There was a significant association between Haller cells and orbital floor dehiscence (p=0.002). Conclusion The prevalence of Haller cells was remarkably high and presence of Haller cells was strongly associated with ipsilateral orbital floor dehiscence. Based on the findings of this study, CBCT can be useful in delineation of the bony anatomy of sinonasal complex.

scholarly journals Proposed classification for interproximal contacts of primary molars using CBCT: a pilot study

2018 ◽  
Vol 3 ◽  
pp. 98
Author(s):  
M. Kirthiga ◽  
M. S. Muthu ◽  
G. Kayalvizhi ◽  
C. Krithika
Keyword(s):  
Primary Teeth ◽  
Three Dimensional ◽  
Cross Sectional Study ◽  
Cone Beam ◽  
Permanent Teeth ◽  
Primary Molars ◽  
Type I ◽  
Cross Sectional ◽  
Contact Areas ◽  
Different Types

Background: Contact areas in primary teeth are known to be broader, flatter, and situated more gingivally than in permanent teeth. The objective of the present study was to evaluate the different types of intact contact areas in primary teeth using cone beam computed tomography (CBCT) among children. Methods: A cross-sectional study was designed with 74 contacts from 28 existing CBCT images of patients aged between 3 and 14 years, obtained from the Indian Dental Education Academy, Chennai, India. The shape of the contact area was observed at three levels, the coronal, middle, and apical thirds, in three different sections of CBCT. The weighted Cohen’s kappa values for inter-examiner reliability was 0.893 at baseline. Prevalence of the types of contact areas was expressed in the form of numbers and percentages. Results: Results exhibited four different types of contact areas between the primary molars, namely, O type, X type, I type, and S type, based on the shapes observed; hence, the proposed classification is referred to as OXIS. The most common pattern seen was I (66.2%), followed by X (21.6%), O (9.4%) and the least common was S (2.7%). Conclusion: The three-dimensional evaluation of intact interproximal contact areas between primary molars are of four types.

scholarly journals Anatomical evaluation of the nasopalatine canal using CBCT (Cone Beam Computed Tomography): Method validation in open source software

2020 ◽  
Vol 9 (11) ◽  
pp. e1829119672
Author(s):  
Luiz Felipe Fernandes Gonçalves ◽  
Marcelo Augusto Oliveira de Sales ◽  
Yuri Barbosa Alves ◽  
Lucas Rodrigues Pinheiro
Keyword(s):  
Computed Tomography ◽  
Open Source ◽  
Open Source Software ◽  
Cone Beam Computed Tomography ◽  
Cross Sectional Study ◽  
Cone Beam ◽  
Linear Measurements ◽  
Cross Sectional ◽  
Men And Women ◽  
Tomography Method

Objective: Development and validation (using open source software) of a method for volumetric and linear assessment of the nasopalatine channel (NPC) using cone beam computed tomography (CBCT). Materials and methods: This was an observational, cross-sectional study of 276 CBCTs. Acquisition was performed on a Prexion 3D computerized tomography scanner (manufacturer), using voxels of 0.08 mm and 0.14 mm, (with FOV at 5 and 12 cm). The images were compiled and divided in accordance with gender and the dental condition of the maxilla. Evaluation took place on a MacBook Pro computer using the Horos Project program (Version 3.3.5). Linear measurements and NPC volumetric evaluations were performed after correcting the orientation axes (sagittal and axial). The length and ROI volume tools were used. Results: The average age for men was 60.15 ± 11.94, for women it was 59.95 ± 10.63. Respectively, for men and women, the average NPC volume values ​​ were: 68.59 mm3 and 59.37 mm3 (p = 0.032), for length they were 10.08 mm and 8.84 mm (p = 0.000). Of the dentate participants, the NPC averages for volume for men and women were: 71.01 mm3 and 57.18 mm3 (p = 0.007), for length they were 10.26 mm and 9.14 mm (p = 0.001). In the edentulous, the average NPC lengths were 9.79 mm (men) and 8.37 mm (women) (p = 0.005). Conclusion: For linear and volumetric nasopalatine channel assessment, the post-processing method used in the Horos software was considered precise and easy-to-use.

scholarly journals Proposed classification for interproximal contacts of primary molars using CBCT: a pilot study

2018 ◽  
Vol 3 ◽  
pp. 98 ◽  
Author(s):  
M. Kirthiga ◽  
M. S. Muthu ◽  
G. Kayalvizhi ◽  
C. Krithika
Keyword(s):  
Primary Teeth ◽  
Three Dimensional ◽  
Cross Sectional Study ◽  
Cone Beam ◽  
Permanent Teeth ◽  
Primary Molars ◽  
Type I ◽  
Cross Sectional ◽  
Contact Areas ◽  
Different Types

Background: Interproximal contact areas in primary teeth are known to be broader, flatter, and situated more gingivally than in permanent teeth. The objective of the present study was to evaluate the different types of intact interproximal contact areas in primary teeth using cone beam computed tomography (CBCT) among children. Methods: A cross-sectional study was designed with 74 contacts from 28 existing CBCT images of children aged between 3 and 14 years, obtained from the Indian Dental Education Academy, Chennai, India. The shape of the contact area was observed at three levels, the coronal, middle, and apical thirds, in three different sections of CBCT. Prevalence of the types of contact areas was expressed in the form of numbers and percentages. Results: The weighted Cohen’s kappa values for inter-examiner reliability was 0.893 at baseline. Results exhibited four different types of contact areas between the primary molars, namely, O type, X type, I type, and S type, based on the shapes observed; hence, the proposed classification is referred to as OXIS. The most common pattern seen was I (66.2%), followed by X (21.6%), O (9.4%) and the least common was S (2.7%). Conclusion: The three-dimensional evaluation of intact interproximal contact areas between primary molars are of four types, O,X, I and S.

scholarly journals In Vivo Comparison of Conventional and Cone Beam CT Synthesized Cephalograms

2008 ◽  
Vol 78 (5) ◽  
pp. 873-879 ◽  
Author(s):  
Vandana Kumar ◽  
John Ludlow ◽  
Lucia Helena Soares Cevidanes ◽  
André Mol
Keyword(s):  
Repeated Measures ◽  
Cone Beam Ct ◽  
Statistical Significance ◽  
Three Dimensional ◽  
Cone Beam ◽  
Volume Data ◽  
Linear Measurements ◽  
Lateral Cephalograms ◽  
Angular Measurements

Abstract Objective: To compare measurements from synthesized cone-beam computed tomography (CBCT) lateral cephalograms using orthogonal and perspective projections with those from conventional cephalometric radiographs. Materials and Methods: Thirty-one patients were imaged using CBCT and conventional cephalometry. CBCT volume data were imported in Dolphin 3D. Orthogonal and perspective lateral cephalometric radiographs were created from three-dimensional (3D) virtual models. Twelve linear and five angular measurements were made on synthesized and conventional cephalograms in a randomized fashion. Conventional image measurements were corrected for known magnification. Linear and angular measurements were compared between image modalities using repeated measures analysis of variance. Statistical significance was defined as an α level of .01. Results: With the exception of the Frankfort-mandibular plane angle (P &lt; .0001), angular measurements were not statistically different for any modality (P &gt; .01). Linear measurements, whether based on soft or hard tissue landmarks, were not statistically different (P &gt; .01). Conclusions: Measurements from in vivo CBCT synthesized cephalograms are similar to those based on conventional radiographic images. Thus, additional conventional imaging may generally be avoided when CBCT scans are acquired for orthodontic diagnosis.

Three dimensional cone-beam CT sialography in non tumour salivary pathologies: procedure and results

2019 ◽  
Vol 48 ◽  
pp. 226
Author(s):  
H. Bertin ◽  
R. Bonnet ◽  
M. Anquetil ◽  
A.S. Delemazure ◽  
E. Mourrain-Langlois ◽  
...  
Keyword(s):  
Cone Beam Ct ◽  
Three Dimensional ◽  
Cone Beam ◽  
Dimensional Cone

scholarly journals Accuracy and Reproducibility of Facial Measurements of Digital Photographs and Wrapped Cone Beam Computed Tomography (CBCT) Photographs

Diagnostics ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 757
Author(s):  
Maged Sultan Alhammadi ◽  
Abeer Abdulkareem Al-mashraqi ◽  
Rayid Hussain Alnami ◽  
Nawaf Mohammad Ashqar ◽  
Omar Hassan Alamir ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Soft Tissue ◽  
Cone Beam Computed Tomography ◽  
High Reliability ◽  
Three Dimensional ◽  
Cone Beam ◽  
Cross Sectional ◽  
Facial Profile ◽  
Digital Photographs ◽  
Gonial Angle

The study sought to assess whether the soft tissue facial profile measurements of direct Cone Beam Computed Tomography (CBCT) and wrapped CBCT images of non-standardized facial photographs are accurate compared to the standardized digital photographs. In this cross-sectional study, 60 patients with an age range of 18–30 years, who were indicated for CBCT, were enrolled. Two facial photographs were taken per patient: standardized and random (non-standardized). The non-standardized ones were wrapped with the CBCT images. The most used soft tissue facial profile landmarks/parameters (linear and angular) were measured on direct soft tissue three-dimensional (3D) images and on the photographs wrapped over the 3D-CBCT images, and then compared to the standardized photographs. The reliability analysis was performed using concordance correlation coefficients (CCC) and depicted graphically using Bland–Altman plots. Most of the linear and angular measurements showed high reliability (0.91 to 0.998). Nevertheless, four soft tissue measurements were unreliable; namely, posterior gonial angle (0.085 and 0.11 for wrapped and direct CBCT soft tissue, respectively), mandibular plane angle (0.006 and 0.0016 for wrapped and direct CBCT soft tissue, respectively), posterior facial height (0.63 and 0.62 for wrapped and direct CBCT soft tissue, respectively) and total soft tissue facial convexity (0.52 for both wrapped and direct CBCT soft tissue, respectively). The soft tissue facial profile measurements from either the direct 3D-CBCT images or the wrapped CBCT images of non-standardized frontal photographs were accurate, and can be used to analyze most of the soft tissue facial profile measurements.

scholarly journals Bone quality and quantity of the mandibular symphyseal region in autogenous bone grafting using cone-beam computed tomography: a cross-sectional study

2021 ◽  
Vol 17 (1) ◽  
Author(s):  
Yaser Safi ◽  
Reza Amid ◽  
Mahdi Kadkhodazadeh ◽  
Hamed Mortazavi ◽  
Mohamad Payam Sharifi ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cross Sectional Study ◽  
Cone Beam ◽  
Autogenous Bone ◽  
Loop Length ◽  
Sectional Study ◽  
Cross Sectional ◽  
Anterior Loop ◽  
Bone Graft Harvesting

Abstract Background Bone volume plays a pivotal role in the success of dental implant treatment. Autogenous bone grafts should be harvested from reliable sites in the maxillofacial region. This study sought to assess the quantity and quality of bone in the mandibular symphysis for autogenous bone graft harvesting using cone-beam computed tomography (CBCT). Methods This cross-sectional study evaluated the CBCT scans of 78 adults presenting to three oral and maxillofacial radiology centers. The vertical (VD) and horizontal (HD) alveolar bone dimensions, cortical thickness (CT), and cancellous to cortical bone ratio (C/C) were measured in the interforaminal region of the mandible at the sites of central incisor to first premolar teeth. The interforaminal distance (ID) and the anterior loop length were also measured. Nonparametric statistical tests were used to analyze the data with respect to sex, age, and tooth position. Results The median VD, HD, and CT of the symphysis were 20.21 (3.26), 4.13 (0.37), and 2.25 (0.23) mm, respectively. The median C/C was 1.51 (0.11). The median ID was 52.24 (8.24) mm, and the median anterior loop length was 1.82 (1.06) mm. Significant differences were observed in all parameters among different teeth. Most of the measured parameters were greater in males compared with females. There were significant differences in ID, VD, and CT between different age groups. Conclusions The quantity and quality of the available bone in the mandibular symphysis for bone graft harvesting vary by gender, age, and harvesting site, necessitating careful preoperative evaluation.

scholarly journals Parent and Child Factors Associated with Household versus Community Adversity among Black and Hispanic Children

2021 ◽  
Author(s):  
Kristen R. Choi ◽  
Tatum Stewart ◽  
Jewel D. Davies ◽  
Sara Naureckas ◽  
Angela Venegas-Murillo ◽  
...  
Keyword(s):  
Behavioral Problems ◽  
Clinical Sample ◽  
Cross Sectional Study ◽  
Clinical Settings ◽  
Hispanic Children ◽  
Cross Sectional ◽  
Childhood Experiences ◽  
Factors Associated ◽  
Trauma Informed Care ◽  
Trauma Informed

AbstractThe purpose of this study was to describe exposure to within-household and community adverse childhood experiences (ACEs) and to identify child- and parent-level factors associated with exposure to different kinds of ACEs. This cross-sectional study used a clinical sample of 257 Black and Hispanic children ages 3–16 years and their caregivers who were seeking care at two federally qualified health centers in Chicago, Illinois and screened positive for a behavioral health problem. The sample had high levels of within-household ACEs (76% reported at least one) and community ACEs (71% reported at least one). Black children experienced more overall and within-household ACEs than Hispanic children, including forced separation from a caregiver and family member incarceration. Hispanic children experienced more bullying and violent media exposure. Significant associations to all categories of ACEs were observed for depression, child behavioral problems, and older child age. Tailored assessment of ACEs and interventions such as trauma-informed care are needed in pediatric clinical settings, including assessment of ACEs children in experience in communities.

Sign in / Sign up

Export Citation Format

Share Document