New World Lithic Typology Project: Part II

1964 ◽  
Vol 29 (4) ◽  
pp. 489-493 ◽  
Author(s):  
Alex D. Krieger
Keyword(s):  
High Speed ◽  
New World ◽  
Standard Form ◽  
Steering Committee ◽  
Pilot Studies ◽  
Stone Artifacts ◽  
Advantages And Disadvantages ◽  
Central Facility ◽  
Broad Scale

AbstractSupplementing Part I of this report, by Weyer, Part II is concerned with certain vital needs in American archaeology for a central facility in which high-speed methods of data analysis can be applied to the determination of types of stone artifacts on a broad scale, the distribution of these types can be mapped wherever they occur in the New World, manuals can be prepared for general research, and related functions can be performed. It is held that our individualistic approaches to these problems in various areas, rather than producing strictly comparable results, are causing greater confusion than ever; that distributional studies based on noncomparable “types” are superficial and misleading; and that there are already on hand such great amounts of material that their analysis can never be accomplished comprehensively by “hand” methods. The advantages and disadvantages of edge-punch and IBM cards are discussed in relation to several purposes, such as catalog records, sorting for attributes (singly and in combinations), and computer treatment. The project's steering committee has decided to proceed with IBM cards, but before disseminating its recommendations, will conduct pilot studies to achieve the most efficient codification of attributes as well as a standard form on which data must be recorded before an operator can proceed with the punching of cards.

New World Lithic Typology Project: Part I

1964 ◽  
Vol 29 (4) ◽  
pp. 487-489 ◽  
Author(s):  
Edward M. Weyer
Keyword(s):  
New Mexico ◽  
Data Processing ◽  
New World ◽  
Regional Scale ◽  
Santa Fe ◽  
Processing Methods ◽  
Pilot Studies ◽  
Stone Artifacts ◽  
Actual Use ◽  
Rapid Processing

AbstractA desire to increase efficiency in the description and typological study of stone artifacts led to a conference of ten archaeologists in Santa Fe, New Mexico. This conference concentrated on the delineation of attributes of specimens rather than on the creation of a typological system. It attempted to meet the requirements of this phase of archaeology on a continental rather than a regional scale. Considerable attention was given to the various sorts of punched cards and to data-processing equipment. A glossary of definitions and an attribute form sheet for recording specimens were compiled and issued to the attending members for use in pilot studies of regional collections. The form sheets were laid out with a view to transferring the data to standard IBM cards and determining significant clusters of attributes. The testing of the definitions of attributes and the form sheet through actual use is intended to reveal possible improvements and to evaluate the practicality of rapid-processing methods in typological studies of this nature.

scholarly journals DETERMINATION OF DYNAMIC LOADS IN TRANSMISSIONS TRACKED FOREST MACHINE WHILE OVERCOMING OBSTACLES

2017 ◽  
Vol 7 (1) ◽  
pp. 185-196
Author(s):  
Клубничкин ◽  
Vladislav Klubnichkin ◽  
Клубничкин ◽  
Evgeniy Klubnichkin ◽  
Бухтояров ◽  
...  
Keyword(s):  
High Speed ◽  
Experimental Studies ◽  
Operating Conditions ◽  
Dynamic Loads ◽  
Pilot Studies ◽  
Torque Transmission ◽  
Characteristic Species ◽  
Final Drive

The theoretical analysis of dynamic phenomena in transmission tracked forest machine is much more difficult in the absence of experimental data on the effects of the input characteristic of the machine. The most characteristic species in the transmission effects that arise under real operating conditions allow to evaluate the results of experimental studies, they also provide an opportunity to assess the quality of theoretical studies. To determine the loading of the transmission in the experiment involves the measurement of a number of kinematic and power parameters characterizing the speed and stress state of the transmission. In the course of the research used a special measuring equipment made in Germany includes the high-speed digital telemetry system for strain "TEL1-PCM-HS" company KMT. This article describes how to determine the dynamic load transmission elements tracked forest machine LZ-5 in overcoming individual barriers in experimental studies (tests). The paper presents a program of pilot studies tracked forest machine. Presented curves change the time settings on the final drives and cardan shaft, depending on the speed of the engine and drive sprockets in overcoming obstacles GLZM with different gears. histograms were constructed on the distribution of the torque transmission shafts for various modes of overcoming obstacles in order to analyze the influence of operational factors on the magnitude of dynamic loads. The article presents the distribution curve of the moments on the driven shaft final drive to overcome obstacles tracked forest machine with a pack assortments in the volume of 12m3. It was noted that there are no less than 20 times the dynamic point values, which exceed the estimated time for the overcoming of obstacles. From the studies that the transmission level of at least dynamic forces having height obstacles.

scholarly journals Determination of air and hydrofoil pressure coefficient by laser doppler anemometry

2010 ◽  
Vol 37 (1) ◽  
pp. 17-35
Author(s):  
Slavica Ristic ◽  
Mirjana Puharic ◽  
Marina Kutin ◽  
Dusan Matic
Keyword(s):  
High Speed ◽  
Stokes Equations ◽  
Laser Doppler Anemometry ◽  
Pressure Coefficient ◽  
Laser Doppler ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Advantages And Disadvantages ◽  
Axial Pump

Some results of experiments performed in water cavitation tunnel are presented. Pressure coefficient (Cp) was experimentally determined by Laser Doppler Anemometry (LDA) measurements. Two models were tested: model of airplane G4 (Super Galeb) and hydrofoil of high speed axial pump. These models are not prepared for conventional pressure measurements, so that LDA is applied for Cp determination. Numerical results were obtained using a code for average Navier-Stokes equations solutions. Comparisons between computational and experimental results prove the effectiveness of the LDA. The advantages and disadvantages of LDA application are discussed. Flow visualization was made by air bubbles.

Recent Patents on the Angular Contact Ball Bearing of High-Speed Motorized Spindle

2020 ◽  
Vol 13 ◽  
Author(s):  
Yudong Bao ◽  
Linkai Wu ◽  
Yanling Zhao ◽  
Chengyi Pan
Keyword(s):  
High Speed ◽  
Ball Bearing ◽  
Rapid Development ◽  
Ceramic Materials ◽  
Development Trend ◽  
Numerical Control ◽  
Angular Contact Ball Bearing ◽  
Practical Applications ◽  
High Speed Cutting ◽  
Advantages And Disadvantages

Background:: Angular contact ball bearings are the most popular bearing type used in the high speed spindle for machining centers, The performance of the bearing directly affects the machining efficiency of the machine tool, Obtaining a higher value is the direction of its research and development. Objective:: By analyzing the research achievements and patents of electric spindle angular contact bearings, summarizing the development trend provides a reference for the development of electric spindle bearings. Methods:: Through the analysis of the relevant technology of the electric spindle angular contact ball bearing, the advantages and disadvantages of the angular contact ball bearing are introduced, and the research results are combined with the patent analysis. Results:: With the rapid development of high-speed cutting and numerical control technology and the needs of practical applications, the spindle requires higher and higher speeds for bearings. In order to meet the requirements of use, it is necessary to improve the bearing performance by optimizing the structure size and improving the lubrication conditions. Meanwhile, reasonable processing and assembly methods will also have a beneficial effect on bearing performance. Conclusion:: With the continuous deepening of bearing technology research and the use of new structures and ceramic materials has made the bearing's limit speed repeatedly reach new highs. The future development trend of high-speed bearings for electric spindles is environmental protection, intelligence, high speed, high precision and long life.

Sampling, Preservation and Counting of Samples II: Zooplankton

2017 ◽  
Author(s):  
Peter H. Wiebe ◽  
Ann Bucklin ◽  
Mark Benfield
Keyword(s):  
Genetic Analysis ◽  
High Speed ◽  
Morphological Analysis ◽  
Taxonomic Composition ◽  
Sampling Techniques ◽  
Sample Analysis ◽  
Sample Preservation ◽  
The Past ◽  
Plankton Collection

This chapter reviews traditional and new zooplankton sampling techniques, sample preservation, and sample analysis, and provides the sources where in-depth discussion of these topics is addressed. The net systems that have been developed over the past 100+ years, many of which are still in use today, can be categorized into eight groups: non-opening/closing nets, simple opening/closing nets, high-speed samplers, neuston samplers, planktobenthos plankton nets, closing cod-end samplers, multiple net systems, and moored plankton collection systems. Methods of sample preservation include preservation for sample enumeration and taxonomic morphological analysis, and preservation of samples for genetic analysis. Methods of analysis of zooplankton samples include determination of biomass, taxonomic composition, and size by traditional methods; and genetic analysis of zooplankton samples.

Power information network intrusion detection based on deep learning and cloud computing

2021 ◽  
pp. 1-9
Author(s):  
Xiangbing Zhao ◽  
Jianhui Zhou
Keyword(s):  
Cloud Computing ◽  
Deep Learning ◽  
Intrusion Detection ◽  
High Speed ◽  
Information Networks ◽  
Network Intrusion Detection ◽  
Information Network ◽  
Advantages And Disadvantages ◽  
Network Intrusion ◽  
Capture Mechanism

With the advent of the computer network era, people like to think in deeper ways and methods. In addition, the power information network is facing the problem of information leakage. The research of power information network intrusion detection is helpful to prevent the intrusion and attack of bad factors, ensure the safety of information, and protect state secrets and personal privacy. In this paper, through the NRIDS model and network data analysis method, based on deep learning and cloud computing, the demand analysis of the real-time intrusion detection system for the power information network is carried out. The advantages and disadvantages of this kind of message capture mechanism are compared, and then a high-speed article capture mechanism is designed based on the DPDK research. Since cloud computing and power information networks are the most commonly used tools and ways for us to obtain information in our daily lives, our lives will be difficult to carry out without cloud computing and power information networks, so we must do a good job to ensure the security of network information network intrusion detection and defense measures.

scholarly journals Delay Equivalences in Tuning PID Control for the Double Integrator Plus Dead-Time

Mathematics ◽  
2021 ◽  
Vol 9 (4) ◽  
pp. 328
Author(s):  
Mikulas Huba ◽  
Damir Vrancic
Keyword(s):  
Dead Time ◽  
Pid Controllers ◽  
Noisy Environment ◽  
Advantages And Disadvantages ◽  
Implementation Problem ◽  
Low Pass ◽  
Excellent Control ◽  
Low Pass Filters ◽  
Double Integrator

The paper investigates and explains a new simple analytical tuning of proportional-integrative-derivative (PID) controllers. In combination with nth order series binomial low-pass filters, they are to be applied to the double-integrator-plus-dead-time (DIPDT) plant models. With respect to the use of derivatives, it should be understood that the design of appropriate filters is not only an implementation problem. Rather, it is also critical for the resulting performance, robustness and noise attenuation. To simplify controller commissioning, integrated tuning procedures (ITPs) based on three different concepts of filter delay equivalences are presented. For simultaneous determination of controller + filter parameters, the design uses the multiple real dominant poles method. The excellent control loop performance in a noisy environment and the specific advantages and disadvantages of the resulting equivalences are discussed. The results show that none of them is globally optimal. Each of them is advantageous only for certain noise levels and the desired degree of their filtering.

Reynolds-averaged Navier–Stokes simulation of hydrofoil effects on hydrodynamic coefficients of a catamaran in forced oscillation

2016 ◽  
Vol 231 (2) ◽  
pp. 364-383
Author(s):  
Amin Najafi ◽  
Mohammad Saeed Seif
Keyword(s):  
High Speed ◽  
Experimental Approach ◽  
Navier Stokes ◽  
Hydrodynamic Coefficients ◽  
Laboratory Equipment ◽  
Factors Affecting ◽  
High Frequencies ◽  
Frequency Independent ◽  
Reynolds Averaged Navier Stokes

Determination of high-speed crafts’ hydrodynamic coefficients will help to analyze the dynamics of these kinds of vessels and the factors affecting their dynamic stabilities. Also, it can be useful and effective in controlling the vessel instabilities. The main purpose of this study is to determine the coefficients of longitudinal motions of a planing catamaran with and without a hydrofoil using Reynolds-averaged Navier–Stokes method to evaluate the foil effects on them. Determination of hydrodynamic coefficients by experimental approach is costly and requires meticulous laboratory equipment; therefore, utilizing the numerical methods and developing a virtual laboratory seem highly efficient. In this study, the numerical results for hydrodynamic coefficients of a high-speed craft are verified against Troesch’s experimental results. In the following, after determination of hydrodynamic coefficients of a planing catamaran with and without foil, the foil effects on its hydrodynamic coefficients are evaluated. The results indicate that most of the coefficients are frequency-independent especially at high frequencies.

THE DETERMINATION OF DIGITAL WIENER FILTERS BY MEANS OF GRADIENT METHODS

Geophysics ◽  
1973 ◽  
Vol 38 (2) ◽  
pp. 310-326 ◽  
Author(s):  
R. J. Wang ◽  
S. Treitel
Keyword(s):  
Seismic Data ◽  
High Speed ◽  
Gradient Methods ◽  
Wiener Filter ◽  
Gradient Algorithm ◽  
Rapid Convergence ◽  
True Solution ◽  
Peripheral Device ◽  
Wiener Filters

The normal equations for the discrete Wiener filter are conventionally solved with Levinson’s algorithm. The resultant solutions are exact except for numerical roundoff. In many instances, approximate rather than exact solutions satisfy seismologists’ requirements. The so‐called “gradient” or “steepest descent” iteration techniques can be used to produce approximate filters at computing speeds significantly higher than those achievable with Levinson’s method. Moreover, gradient schemes are well suited for implementation on a digital computer provided with a floating‐point array processor (i.e., a high‐speed peripheral device designed to carry out a specific set of multiply‐and‐add operations). Levinson’s method (1947) cannot be programmed efficiently for such special‐purpose hardware, and this consideration renders the use of gradient schemes even more attractive. It is, of course, advisable to utilize a gradient algorithm which generally provides rapid convergence to the true solution. The “conjugate‐gradient” method of Hestenes (1956) is one of a family of algorithms having this property. Experimental calculations performed with real seismic data indicate that adequate filter approximations are obtainable at a fraction of the computer cost required for use of Levinson’s algorithm.

Sign in / Sign up

Export Citation Format

Share Document