Lines in the Sand: Competition and Stone Selection on the Pajarito Plateau, New Mexico

1998 ◽  
Vol 63 (4) ◽  
pp. 573-593 ◽  
Author(s):  
Michael R. Walsh
Keyword(s):  
New Mexico ◽  
Resource Competition ◽  
Raw Materials ◽  
Classic Period ◽  
Raw Material ◽  
Wild Food ◽  
Pajarito Plateau ◽  
Resource Collection ◽  
Materials Used ◽  
The Individual

Recent investigations on the Pajarito Plateau, north-central New Mexico, have established a sequential picture of changing levels of competition over resource territories. Acuity of competition is inferred through measurement of relative sizes of territories routinely exploited for wild food resources. Village-level territories are determined through an accounting of the raw materials used to make flaked stone tools, which materials are argued to have been gathered during routine food collecting activities. Three distinct raw material options were available on the Plateau, in the form of tool-grade obsidian, chert, and basalt. Because these raw material types come from mutually exclusive locations over the Plateau, it is possible to inferentially measure resource collection areas for individual sites through assessment of raw material diversity. Chronological differences among sites allow for reconstruction of differing levels in the acuity of prehistoric competition. It is found that Classic Period (A. D. 1325-historic period) aggregation on the Plateau was preceded by several generations of escalating territorial competition. This finding represents a subtle but important departure form the current characterization of the Pajarito Classic Period as a “competition stage”, and suggests instead that aggregation fundamentally alleviated resource competition from the perspective of the individual or individual household.

scholarly journals Bio-Based Alternatives to Phenol and Formaldehyde for the Production of Resins

Polymers ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2237 ◽  
Author(s):  
P. R. Sarika ◽  
Paul Nancarrow ◽  
Abdulrahman Khansaheb ◽  
Taleb Ibrahim
Keyword(s):  
Raw Materials ◽  
Phenol Formaldehyde ◽  
Raw Material ◽  
Wood Industry ◽  
Suitable Material ◽  
The Past ◽  
Wide Range ◽  
Recent Developments ◽  
Sustainable Materials ◽  
Materials Used

Phenol–formaldehyde (PF) resin continues to dominate the resin industry more than 100 years after its first synthesis. Its versatile properties such as thermal stability, chemical resistance, fire resistance, and dimensional stability make it a suitable material for a wide range of applications. PF resins have been used in the wood industry as adhesives, in paints and coatings, and in the aerospace, construction, and building industries as composites and foams. Currently, petroleum is the key source of raw materials used in manufacturing PF resin. However, increasing environmental pollution and fossil fuel depletion have driven industries to seek sustainable alternatives to petroleum based raw materials. Over the past decade, researchers have replaced phenol and formaldehyde with sustainable materials such as lignin, tannin, cardanol, hydroxymethylfurfural, and glyoxal to produce bio-based PF resin. Several synthesis modifications are currently under investigation towards improving the properties of bio-based phenolic resin. This review discusses recent developments in the synthesis of PF resins, particularly those created from sustainable raw material substitutes, and modifications applied to the synthetic route in order to improve the mechanical properties.

scholarly journals Incorporation of sugarcane bagasse ash waste as an alternative raw material for red ceramic

Cerâmica ◽  
2013 ◽  
Vol 59 (351) ◽  
pp. 473-480 ◽  
Author(s):  
K. C. P. Faria ◽  
J. N. F. Holanda
Keyword(s):  
Sugarcane Bagasse ◽  
Raw Materials ◽  
Phase Evolution ◽  
Linear Shrinkage ◽  
Raw Material ◽  
Partial Replacement ◽  
Clay Material ◽  
Natural Clay ◽  
Materials Used ◽  
Sugarcane Industry

The sugarcane industry generates huge amounts of sugarcane bagasse ashes (SCBA). This work investigates the incorporation of a SCBA waste as an alternative raw material into a clay body, replacing natural clay material by up to 20 wt.%. Clay ceramic pieces were produced by uniaxial pressing and fired at temperatures varying from 700 to 1100 ºC. The technological properties of the clay ceramic pieces (linear shrinkage, apparent density, water absorption, and tensile strength) as function of the firing temperature and waste addition are investigated. The phase evolution during firing was followed by X-ray diffraction. The results showed that the SCBA waste could be incorporated into red ceramics (bricks and roofing tiles) in partial replacement for natural clay material. These results confirm the feasibility of valorisation of SCBA waste to produce red ceramic. This use of SCBA can also contribute greatly to reducing the environmental problems of the sugarcane industry, and also save the sources of natural raw materials used in the ceramic industry.

Petrography

2016 ◽  
pp. 232-265 ◽  
Author(s):  
Patrick Degryse ◽  
Dennis Braekmans
Keyword(s):  
Raw Materials ◽  
Raw Material ◽  
Rock Fragments ◽  
Historical Materials ◽  
Fabric Analysis ◽  
Trade And Exchange ◽  
Indispensable Tool ◽  
Materials Used ◽  
Ceramic Petrography ◽  
Material Provenance

Petrography has developed into an indispensable tool for ceramic fabric analysis, specifically studying the mineralogical and textural composition of ceramic objects. Petrography is a technique commonly used in geology to describe and classify rocks. Ceramic petrography studies clay-based archaeological or historical materials. Using a polarizing light microscope (PLM) in ceramic studies, the different raw materials used to make a ceramic object can be identified, ranging from clays and other minerals to rock fragments and inorganic or organic temper. The technique moreover feeds into the study of raw material provenance and origin, and is able to discern the different technological procedures followed to make the ceramic object (from shaping to firing), next to providing clues on the function of the object. This information not only helps reconstruct trade and exchange of raw materials and ceramics, but aids in reconstructing society behind the pot.

DETERMINANTS OF THE SELECTION OF RAW MATERIALS USED IN ANIMAL FEED PRODUCTION

2020 ◽  
Vol XXII (2) ◽  
pp. 191-199
Author(s):  
Magdalena Śmiglak-Krajewska
Keyword(s):  
Animal Feed ◽  
Raw Materials ◽  
Soya Bean ◽  
Raw Material ◽  
Factors Affecting ◽  
Feed Production ◽  
Bean Meal ◽  
Materials Used ◽  
Soya Bean Meal ◽  
Selection Of

The main purpose of this paper was to identify the factors affecting the selection of raw materials used by feed operators in feed production. An attempt was also made to indicate the barriers to increasing the use of native protein plants by feed operators in feed production. Today, many EU countries (including Poland) primarily rely on vegetable protein derived from genetically modified soya bean meal (mainly imported from South America and the U.S.) in addressing their needs for protein raw material used in animal feed. For many years now, Poland has taken steps to increase the production and use of native protein raw material to partially replace soya bean meal imports. The use of mixes of diverse domestic protein sources derived from grain legumes (peas, field beans, lupine) can provide an advantageous alternative to compound feeding stuff based on imported post-extraction soya bean meal. To meet the objective defined above, this paper relied on the results of a 2018 survey conducted with a sample of 29 feed operators located across the country. More than half (55%) of the enterprises surveyed did not use legumes in feed production; the use of legumes was above 10% in only 3% of respondents. When asked about the key factors affecting the selection of raw materials used in production processes, the respondents declared to be interested in buying large batches of homogeneous raw materials that meet specific quality parameters (33% replied “rather yes” and 67% replied “definitely yes”). The protein content of plant seeds used in feed production was identified as another aspect of extreme importance (55% replied “rather yes” and 24% replied “definitely yes”).

Terminal Classic Maya Heterodoxy and Shrine Vernacularism in the Sibun Valley, Belize

2012 ◽  
Vol 22 (1) ◽  
pp. 115-134 ◽  
Author(s):  
Patricia A. McAnany
Keyword(s):  
Raw Materials ◽  
Close Association ◽  
Ninth Century ◽  
Classic Maya ◽  
Classic Period ◽  
Beliefs And Practices ◽  
Terminal Classic ◽  
New Information ◽  
Materials Used ◽  
Sibun Valley

A monolithic view of Classic Maya society as dominated by divine rulers who inexplicably ceased to erect monuments with long-count dates during the ninth century is examined by reference to new information from Terminal Classic sites in the Sibun Valley of Belize. In this locale and elsewhere, the construction of circular one-room buildings — with striking associated artefacts — may be interpreted as signalling social tensions between the orthodoxy of Classic Maya divine rulers and the more heterodoxic beliefs and practices associated with circular structures built at the end of the Classic period. The round buildings are contextualized within the diversity of architectural expressions of the Sibun Valley and also within a peninsula-wide network of shrines. The chronological placement and character of the Sibun shrines is discussed by way of radiocarbon assays, obsidian sourced by INAA, and raw materials used for groundstone at sites throughout the valley. The presence of marine shell and speleothems — likely used as architectural adornment — found in close association with Sibun Valley round buildings permits discussion of the manner in which elements of the local effected a translation of heterodoxic tenets into vernacularized shrine architecture.

scholarly journals Traditional and new raw materials for spirit beverage production

2021 ◽  
Vol 17 ◽  
pp. 70-78
Author(s):  
Szymon Ługowoj ◽  
Maria Balcerek
Keyword(s):  
Ethanol Production ◽  
Raw Materials ◽  
The Other ◽  
Raw Material ◽  
Fast Growing ◽  
Growth Requirements ◽  
Other Hand ◽  
Materials Used ◽  
Production Industry

The ethanol production industry is a fast growing branch of the economy in many countries, and there is a rich tradition of spirit beverage production of many unique drinks such as Polish vodka and Starka or Irish and Scotch whisk(e)y, all of which have unique organoleptic features. This variety is possible thanks to different raw materials used for production such as rye, barley or corn and potatoes, as well as technological solutions developed over the generations of manufacturing. Rye deserves a closer look due to its low growth requirements and many different uses as well as its long tradition of cultivation, especially in Poland. On the other hand, manufacturers are currently interested in using new, original raw materials for the production of so-called craft alcohols. Buckwheat is an example of a raw material that can be successfully used in the production of original spirits.

scholarly journals Effect of washing time and storage of raw Material on Surimi and Kamaboko of Tilapia (Oreochromis sp.)

2020 ◽  
Vol 7 (3) ◽  
pp. 89
Author(s):  
Eka Saputra
Keyword(s):  
Water Content ◽  
Raw Materials ◽  
Frozen Storage ◽  
Storage Period ◽  
Raw Material ◽  
Minced Fish ◽  
Materials Used ◽  
And Storage

This study aim was to determine the effect of washing and raw materials on frozen storage on the quality of surimi and kamaboko from raw material of tilapia (Oreochromis sp). There were three types of raw materials used, namely minced fish, surimi, and surimi with addition of sorbitol, with three washing treatments and four weeks frozen storage period observed every week. The method used consisted of measurements of pH, water content, bite test, and folding test. Then the results obtained for the best kamaboko tilapia (Oreochromis sp) were obtained from fillet raw materials compared to the raw material of Minced fish and raw materials of Minced Fish + Sorbitol, with a frequency of washing once and frozen storage for 3 weeks.

scholarly journals KAJIAN KOMPOSISI KIMIA SNACK BARS DARI BERBAGAI BAHAN BAKU LOKAL : SYSTEMATIC REVIEW STUDY OF THE CHEMICAL COMPOSITION OF SNACK BARS FROM VARIOUS LOCAL RAW MATERIALS : SYSTEMATIC REVIEW

2021 ◽  
Vol 17 (1) ◽  
pp. 15
Author(s):  
Mayestika S. D. Taula’bi’ ◽  
Yoakhim Y.E. Oessoe ◽  
Maria F. Sumual
Keyword(s):  
Systematic Review ◽  
Chemical Composition ◽  
Protein Content ◽  
Water Content ◽  
Local Food ◽  
Raw Materials ◽  
Raw Material ◽  
Great Demand ◽  
Review Study ◽  
Materials Used

Snack bars is one of the commercial food products found in the market but this product mostly still use imported raw materials such as soybeans and wheat. Research on the use of local food as raw material for making snack bars is currently in great demand considering that Indonesia has abundant potential agricultural to be optimized in supporting food diversification efforts. This study aims to make an inventory of the types of local raw materials that have been used in the manufacture of snack bars, to record and to study the types binders of snack bars and to evaluate the chemical composition of local raw material snack bars. This research was made with a systematic review design with the PRISMA method. From the results of the systematic review conducted, it was found that local raw materials for cereals, nuts, fruits, vegetables and local tubers can be combined to be used as raw material for making snack bars. Several types of binders that have been used in the manufacture of snack bars are cornstarch, tapioca, sugar, eggs, and also maltodextrin. The evaluation results of the chemical composition of local raw material snack bars, namely having water content ranged from 2.28% - 53.4%, carbohydrate content 27.3% - 86.66%, fat content 8% - 34.46%, protein content 3.49% - 17.61%, and total calories 294.19 kcal/100 g - 552.71 kcal/100 g which is influenced by several factors, namely the use of various raw materials, additional materials used, and the processing of snack bar products

scholarly journals Potensi Pemanfaatan Serat Selulosa sebagai Material Bahan Baku dalam Sintesis Filter Udara Non-Woven sesuai Standar TAPPI T 205

2020 ◽  
Vol 10 (2) ◽  
pp. 37-42
Author(s):  
Irwan Suriaman ◽  
Mardiyati ◽  
Jooned Hendrarsakti ◽  
Ari Darmawan Pasek
Keyword(s):  
Tensile Strength ◽  
Natural Fiber ◽  
Raw Materials ◽  
Natural Fibers ◽  
Morphological Characteristics ◽  
Sem Analysis ◽  
Raw Material ◽  
Ramie Fiber ◽  
Tropical Country ◽  
Materials Used

Industry 4.0 era materials used by entrepreneurs should be recycled, environmentally friendly, renewable with less chemical content. Indonesia as a tropical country has a large land area with the potential to produce the largest natural fiber in the world. One opportunity that can be applied to the utilization of natural fibers in air filters that currently use dominant materials is synthetic fibers. natural fiber has the advantage because it does not contain toxic chemicals, local raw materials, and is easily produced. This research will analyze the mechanical and morphological characteristics of biological fibers that have great potential as pre-filter raw material. Analysis of mechanical properties through tensile strength testing for single fibers and morphological analysis through scanning electron microscopy (SEM). Tensile testing was the results are; palm oil has a tensile strength of 620 MPa; 998 MPa and 213 MPa flax coconut fiber. For the morphological test results from SEM analysis for ramie fiber, it looks solid without fiber holes; The fibers appear to be many small fibers bound to one another while coir fibers have many pore holes in one observed fiber.

Effectiveness of a Lactobacillus sakei Starter Culture in the Reduction of Biogenic Amine Accumulation as a Function of the Raw Material Quality

2001 ◽  
Vol 64 (3) ◽  
pp. 367-373 ◽  
Author(s):  
SARA BOVER-CID ◽  
MARIA IZQUIERDO-PULIDO ◽  
M. CARMEN VIDAL-CAROU
Keyword(s):  
Biogenic Amine ◽  
Dry Matter ◽  
Raw Materials ◽  
Starter Culture ◽  
Raw Material ◽  
Lactobacillus Sakei ◽  
Hygienic Quality ◽  
Fermented Sausages ◽  
Materials Used

The effectiveness of an amine-negative starter culture (Lactobacillus sakei CTC494) in the reduction of biogenic amine production during the ripening of fermented sausages was examined. Four batches were manufactured in parallel:spontaneously fermented and starter-mediated sausages were manufactured from two lots of raw materials of different hygienic quality. Besides the biogenic amine contents, changes in the microbial counts, nitrogenous fractions, pH, and water content were measured at several sampling points during the ripening process. In sausages manufactured from good quality meat, the starter strain of L. sakei reduced and even inhibited biogenic amine accumulation during sausage fermentation, the end products showing extremely low biogenic amine contents (tyramine levels less than 15 mg/kg of dry matter and putrescine and cadaverine levels less than 5 mg/kg of dry matter). Nevertheless, starter-mediated sausages made from poorer-quality raw materials showed much higher amine contents (308, 223, and 36 mg/kg of dry matter of cadaverine, tyramine, and putrescine, respectively), which were only slightly lower than those of the spontaneously fermented sausages made from the same raw materials. The relatively high bacterial numbers of raw materials of poorer-hygienic quality diminished the beneficial effect of the starter strain. Therefore, the effectiveness of the starter was strongly dependent on the hygienic quality of the raw materials used.

Sign in / Sign up

Export Citation Format

Share Document