scholarly journals Titrimetric and spectrophotometric assay of felodipine in tablets using bromate–bromide, Methyl Orange and Indigo Carmine reagents

2005 ◽  
Vol 70 (7) ◽  
pp. 969-978 ◽  
Author(s):  
Kanakapura Basavaiah ◽  
Umakanthappa Chandrashekar ◽  
Nage Gowda
Keyword(s):  
Methyl Orange ◽  
Indigo Carmine ◽  
Reference Method ◽  
Pharmaceutical Formulations ◽  
Spectrophotometric Methods ◽  
Accuracy And Precision ◽  
Significant Difference ◽  
Bulk Drug ◽  
Reaction Stoichiometry ◽  
Comparison Of The Results

Three new methods based on titrimetric and spectrophotometric techniques are described for the determination of felodipine (FLD) in the bulk drug and in tablets using a bromate?bromide mixture and two dyes, Methyl Orange and Indigo Carmine. In the titrimetric method (method A), the drug solution was treated with a measured excess of the bromate?bromide mixture in acid medium and after the reaction was judged to be complete, the unreacted bromine was determined iodometrically. The two spectrophotometric methods are based on the bromination of the drug with a known excess of the bromate?bromide mixture under acidic conditions followed by the estimation of the surplus bromine by reaction with either Methyl Orange (Method B) or Indigo Carmine (Method C) and measuring the absorbance at 520 nm or 610 nm, respectively. In all the methods, the amount of reacted bromine corresponds to the drug content. The titrimetric procedure is applicable for between 6?15 mg and the reaction stoichiometry was found to be 1:1 (drug: BrO3?). The systems obey Beer?s law between 0.12 ? 0.87 ?gml-1 and 0.5 ? 6.0 ?gml-1 formethods B and C respectively. The limits of detection and quantification are reported for both the spectrophotometric methods. The methods could usefully be applied to routine quality control of pharmaceutical formulations containing FLD. Statistical comparison of the results with the reference method shows excellent agreement and indicates no significant difference in accuracy and precision.

scholarly journals Titrimetric and Spectrophotometric Determination of Metaprolol tartrate in Pharmaceuticals Using N-Bromosuccinimide

2007 ◽  
Vol 4 (1) ◽  
pp. 117-127 ◽  
Author(s):  
K. Basavaiah ◽  
B. C. Somashekar
Keyword(s):  
Methyl Orange ◽  
Indigo Carmine ◽  
Reference Method ◽  
Standard Addition ◽  
Reaction Conditions ◽  
Fixed Amount ◽  
Spectrophotometric Methods ◽  
Bulk Drug ◽  
Reaction Stoichiometry

One titrimetric and two spectrophotometric methods are presented for the assay of metaprolol tartrate (MPT) in bulk drug and in tablets. The methods employ N-bromosuccinimide (NBS) as the oxidimetric reagent and two dyes, methyl orange and indigo carmine as spectrophotometric reagents. In titrimetry, an acidified solution of MPT is treated with a known excess amount of NBS and after a definite time, the unreacted oxidant is determined by iodometric back titration. Spectrophotometry involves adding a measured excess of NBS to MPT in acid medium followed by determination of residual NBS by reacting with a fixed amount of either methyl orange and measuring the absorbance at 520 nm (Method A) or indigo carmine and measuring the absorbance at 610 nm (Method B). In all the methods, the amount of NBS reacted corresponds to the amount of MPT. Reaction conditions have been optimized. Titrimetry allows the determination of 1 - 12 mg of MPT and the calculations are based on a 1: 4 (MPT: NBS) reaction stoichiometry. In spectrophotometry, the measured absorbance is found to increase linearly with the concentration of MPT serving as basis for quantitation. The systems obey Beer’s law for 0.5 - 4.0 μg mL-1and 1.25 - 10.0 μg mL-1for method A and method B, respectively. The apparent absorptivities are calculated to 1.07 × 105be and 4.22 × 104L mol cm-1for method A and method B, respectively. The methods developed were applied to the assay of MPT in commercial tablet formulations, and the results were compared statistically with those of a reference method. The accuracy and reliability of the methods were further ascertained by performing recovery tests via standard-addition method.

scholarly journals Rapid titrimetric and spectrophotometric determination of ofloxacin in pharmaceuticals using N-bromosuccinimide

2011 ◽  
Vol 47 (2) ◽  
pp. 251-260 ◽  
Author(s):  
Kanakapura Basavaiah Vinay ◽  
Hosakere Doddarevanna Revanasiddappa ◽  
Okram Zenita Devi ◽  
Pavagada Jagannathamurthy Ramesh ◽  
Kanakapura Basavaiah
Keyword(s):  
Indigo Carmine ◽  
Reference Method ◽  
Standard Addition ◽  
Addition Method ◽  
Fixed Amount ◽  
Spectrophotometric Methods ◽  
Analytical Reagent ◽  
Bulk Drug ◽  
Reaction Stoichiometry

One titrimetric and two spectrophotometric methods have been described for the determination of ofloxacin (OFX) in bulk drug and in tablets, employing N-Bromosuccinimide as an analytical reagent. The proposed methods involve the addition of a known excess of NBS to OFX in acid medium, followed by determination of unreacted NBS. In titrimetry, the unreacted NBS is determined iodometrically, and in spectrophotometry, unreacted NBS is determined by reacting with a fixed amount of either indigo carmine (Method A) or metanil yellow (Method B). In all the methods, the amount of NBS reacted corresponds to the amount of OFX. Titrimetry allows the determination of 1-8 mg of OFX and the calculations are based on a 1:5 (OFX:NBS) reaction stoichiometry. In spectrophotometry, Beer's law is obeyed in the concentration ranges 0.5-5.0 µg/mL for method A and 0.3-3.0 µg/mL for method B. The molar absorptivities are calculated to be 5.53x10(4) and 9.24x10(4) L/mol/cm for method A and method B, respectively. The methods developed were applied to the assay of OFX in tablets, and results compared statistically with those of a reference method. The accuracy and reliability of the methods were further ascertained by performing recovery tests via the standard-addition method.

scholarly journals Indirect spectrophotometric determination of diltiazem hydrochloride in pure form and pharmaceutical formulations

2005 ◽  
Vol 3 (3) ◽  
pp. 520-536 ◽  
Author(s):  
Akram El-Didamony
Keyword(s):  
Reference Method ◽  
Pharmaceutical Formulations ◽  
Molar Absorptivity ◽  
Pure Form ◽  
Diltiazem Hydrochloride ◽  
Spectrophotometric Methods ◽  
Chromotrope 2R ◽  
Significant Difference ◽  
Comparison Of The Results

AbstractThree simple, accurate, and sensitive spectrophotometric methods (A, B and C) have been described for the indirect assay of diltiazem hydrochloride (DIL.HCl), either in pure form or in pharmaceutical formulations. The first method (A) is based on the oxidation of DIL.HCl by N-bromosuccinimide (NBS) and determination of unconsumed NBS by measuring the decrease in absorbance of amaranth dye (AM) at a suitable λmax=521 nm. Other methods (B) and (C) involve the addition of excess cerric ammonium sulfate (CAS) and subsequent determination of the unconsumed oxidant by a decrease in the red color of chromotrope 2R (C2R) at a suitable λmax=528 nm or a decrease in the orange-pink color of rhodamine 6G (Rh6G) at λmax=525 nm, respectively. Regression analysis of Beer-Lambert plots showed good correlation in the concentration ranges 3.0–9.0, 3.5–7.0 and 3.5–6.3 μg ml−1 for methods A, B and C, respectively. The apparent molar absorptivity, Sandell's sensitivity, detection and quantification limits were calculated. The proposed methods have been applied successfully for the analysis of the drug in its pure form and its dosage form. No interference was observed from a common pharmaceutical adjuvant. Statistical comparison of the results with the reference method shows excellent agreement and indicates no significant difference in accuracy and precision.

scholarly journals Titrimetric and spectrophotometric determination of doxycycline hyclate using bromate-bromide, methyl orange and indigo carmine

2010 ◽  
Vol 16 (2) ◽  
pp. 139-148 ◽  
Author(s):  
Jagannathamurthy Ramesh ◽  
Kanakapura Basavaiah ◽  
Ranganath Divya ◽  
Nagaraju Rajendraprasad ◽  
Basavaiah Vinay
Keyword(s):  
Methyl Orange ◽  
Indigo Carmine ◽  
Molar Absorptivity ◽  
Stoichiometric Ratio ◽  
Doxycycline Hyclate ◽  
Fixed Amount ◽  
Spectrophotometric Methods ◽  
Accuracy And Precision ◽  
Bulk Drug

One titrimetric and two indirect spectrophotometric methods are described for the determination of doxycycline hyclate (DCH) in bulk drug and in its formulations. The methods use bromate-bromide, methyl orange and indigo carmine as reagents. In titrimetry (method A), DCH is treated with a known excess of bromate-bromide mixture in acid medium and the residual bromine is back titrated iodometrically after the reaction between DCH and in situ bromine is ensured to be complete. In spectrophotometric methods, the excess of bromine is estimated by treating with a fixed amount of either methyl orange (method B) or indigo carmine (method C) and measuring the change in absorbance either at 520 or 610 nm. Titrimetric method is applicable over 1-8 mg range and the calculations are based on a 1:2 (DCH:bromate) stoichiometric ratio. In spectrophotometry, the calibration graphs were found to be linear over 0.25-1.25 and 1-5 ?g mL-1 for method B and method C, respectively, with corresponding molar absorptivity values of 2.62 ?105 and 6.97 ? 104 L mol-1 cm-1. Accuracy and precision of the assays were determined by computing the intra-day and inter-day variations at three different levels of DCH.

scholarly journals Titrimetric and Spectrophotometric Assay of Oxcarbazepine in Pharmaceuticals Using N-Bromosuccinimide and Bromopyrogallol Red

2011 ◽  
Vol 2011 ◽  
pp. 1-8
Author(s):  
Nagaraju Rajendraprasad ◽  
Kanakapura Basavaiah ◽  
Kanakapura B. Vinay
Keyword(s):  
Spectrophotometric Method ◽  
Reference Method ◽  
Standard Addition ◽  
Molar Absorptivity ◽  
Spectrophotometric Methods ◽  
Bromopyrogallol Red ◽  
Accuracy And Precision ◽  
Significant Difference ◽  
Comparison Of The Results

Titrimetric and spectrophotometric methods are described for the determination of oxcarbazepine (OXC) in bulk drug and in tablets. The methods use N-bromosuccinimide (NBS) and bromopyrogallol red (BPR) as reagents. In titrimetry (method A), an acidified solution of OXC is titrated directly with NBS using methyl orange as indicator. Spectrophotometry (method B) involves the addition of known excess of NBS to an acidified solution of OXC followed by the determination of the unreacted NBS by reacting with BPR and measuring the absorbance of the unreacted dye at 460 nm. Titrimetry allows the determination of 6–18 mg of OXC and follows a reaction stoichiometry of 1 : 1 (OXC : NBS), whereas spectrophotometry is applicable over the concentration range of 0.8–8.0 μg mL-1. Method B with a calculated molar absorptivity of2.52×104 L mol-1 cm-1is the most sensitive spectrophotometric method ever developed for OXC. The optical characteristics such as limits of detection (LOD), quantification (LOQ), and Sandell's sensitivity values are also reported for the spectrophotometric method. The accuracy and precision of the methods were studied on intraday and interday basis. The methods described could usefully be applied to routine quality control of tablets containing OXC. No interference was observed from common pharmaceutical adjuvants. Statistical comparison of the results with a reference method shows an excellent agreement and indicates no significant difference in accuracy and precision. The reliability of the methods was further ascertained by recovery studies in standard addition procedure.

scholarly journals SPECTROPHOTOMETRIC METHODS FOR DETERMINATION OF SOFOSBUVIR AND DACLATASVIR IN PURE AND DOSAGE FORMS

2021 ◽  
pp. 112-119
Author(s):  
MONIR Z. SAAD ◽  
ATEF AMER ◽  
KHALED ELGENDY ◽  
BASEM ELGENDY
Keyword(s):  
Indigo Carmine ◽  
Reference Method ◽  
Standard Addition ◽  
Pharmaceutical Formulations ◽  
Molar Absorptivity ◽  
Experimental Conditions ◽  
Fixed Amount ◽  
Alizarin Red ◽  
Spectrophotometric Methods

Objective: Two simple, sensitive and accurate spectrophotometric methods have been developed for the determination of sofosbuvir (SOF) and daclatasvir (DAC) in pure forms and pharmaceutical formulations. Methods: The proposed methods are based on the oxidation of SOF and DAC by a known excess of cerium(IV) ammonium nitrate in sulphuric acid medium followed by determination of unreacted cerium(IV) by adding a fixed amount of indigo carmine (IC) and alizarin red S (ARS) dyes followed by measuring the absorbance at 610 and 360 nm, respectively. The experimental conditions affecting the reaction were studied and optimized. Results: The beer’s law was obeyed in the concentration ranges of 0.2-3.0, 0.2-4.0 for SOF and 0.5-4.5 and 0.5-5.0 μg/ml for DAC using IC and ARS methods, respectively with a correlation coefficient ≥ 0.9991. The calculated molar absorptivity values are 2.354 × 104, 1.933 × 104 for SOF and 1.786 × 104 and 2.015 × 104 L/mol. cm for DAC using IC and ARS methods, respectively u. The limits of detection and quantification are also reported. Intra-day and inter-day precision and accuracy of the methods have been evaluated. Conclusion: The methods were successfully applied to the assay of SOF and DAC in tablets and the results were statistically compared with those of the reference method by applying Student’s t-test and F-test. No interference was observed from the common tablet excipients. The accuracy and reliability of the methods were further ascertained by performing recovery studies using the standard addition method.

scholarly journals Spectrophotometric Determination of Gemifloxacin Mesylate, Moxifloxacin Hydrochloride, and Enrofloxacin in Pharmaceutical Formulations Using Acid Dyes

2014 ◽  
Vol 2014 ◽  
pp. 1-16 ◽  
Author(s):  
Ayman A. Gouda ◽  
Alaa S. Amin ◽  
Ragaa El-Sheikh ◽  
Amira G. Yousef
Keyword(s):  
Pharmaceutical Formulations ◽  
Bromothymol Blue ◽  
Bromocresol Green ◽  
Bromophenol Blue ◽  
Bromocresol Purple ◽  
Acid Dyes ◽  
Spectrophotometric Methods ◽  
Significant Difference ◽  
Comparison Of The Results

Simple, rapid, and extractive spectrophotometric methods were developed for the determination of some fluoroquinolones antibiotics: gemifloxacin mesylate (GMF), moxifloxacin hydrochloride (MXF), and enrofloxacin (ENF) in pure forms and pharmaceutical formulations. These methods are based on the formation of ion-pair complexes between the basic drugs and acid dyes, namely, bromocresol green (BCG), bromocresol purple (BCP), bromophenol blue (BPB), bromothymol blue (BTB), and methyl orange (MO) in acidic buffer solutions. The formed complexes were extracted with chloroform and measured at 420, 408, 416, 415, and 422 nm for BCG, BCP, BPB, BTB, and MO, respectively, for GMF; at 410, 415, 416, and 420 nm for BCP, BTB, BPB, and MO, respectively, for MXF; and at 419 and 414 nm for BCG and BTB, respectively, in case of ENF. The analytical parameters and their effects are investigated. Beer’s law was obeyed in the ranges 1.0–30, 1.0–20, and 2.0–24 μg mL−1for GMF, MXF, and ENF, respectively. The proposed methods have been applied successfully for the analysis of the studied drugs in pure forms and pharmaceutical formulations. Statistical comparison of the results with the reference methods showed excellent agreement and indicated no significant difference in accuracy and precision.

scholarly journals Use of ceric ammonium sulphate and two dyes, methyl orange and indigo carmine, in the determination of lansoprazole in pharmaceuticals

2007 ◽  
Vol 57 (2) ◽  
pp. 211-220 ◽  
Author(s):  
Kanakapura Basavaiah ◽  
Veeraiah Ramakrishna ◽  
Urdigere Kumar
Keyword(s):  
Methyl Orange ◽  
Ammonium Sulphate ◽  
Indigo Carmine ◽  
Correlation Coefficients ◽  
Standard Addition ◽  
Fixed Amount ◽  
Spectrophotometric Methods ◽  
Relative Standard ◽  
Bulk Drug

Use of ceric ammonium sulphate and two dyes, methyl orange and indigo carmine, in the determination of lansoprazole in pharmaceuticalsTwo spectrophotometric methods are proposed for the assay of lansoprazole (LPZ) in bulk drug and in dosage forms using ceric ammonium sulphate (CAS) and two dyes, methyl orange and indigo carmine, as reagents. The methods involve addition of a known excess of CAS to LPZ in acid medium, followed by determination of residual CAS by reacting with a fixed amount of either methyl orange, measuring the absorbance at 520 nm (method A), or indigo carmine, measuring the absorbance at 610 nm (method B). In both methods, the amount of CAS reacted corresponds to the amount of LPZ and the measured absorbance was found to increase linearly with the concentration of LPZ, which is corroborated by the correlation coefficients of 0.9979 and 0.9954 for methods A and B, respectively. The systems obey Beer's law for 0.5-7.0 μg mL-1and 0.25-3.0 μg mL-1for methods A and B, respectively. The apparent molar absorptivities were calculated to be 3.0 x 104and 4.4 x 104L mol-1cm-1for methods A and B, respectively. The limits of detection (LOD) and quantification (LOQ) were calculated to be 0.08 and 0.25 μg mL-1for method A, and 0.09 and 0.27 μg mLs-1for method B, respectively. The intra-day and inter-day precision and accuracy of the methods were evaluated according to the current ICH guidelines. Both methods were of comparable accuracy (er≤ 2 %). Also, both methods are equally precise as shown by the relative standard deviation values < 1.5%. No interference was observed from common pharmaceutical adjuvants. The accuracy of the methods was further ascertained by performing recovery studies using the standard addition method. The methods were successfully applied to the assay of LPZ in capsule preparations and the results were statistically compared with those of the literature UV-spectrophotometric method by applying Student'st-test andF-test.

scholarly journals Sensitive Spectrophotometric Determination of Atenolol in Pharmaceutical Formulations Using Bromate-Bromide Mixture as an Eco-Friendly Brominating Agent

2012 ◽  
Vol 2012 ◽  
pp. 1-12 ◽  
Author(s):  
Kudige N. Prashanth ◽  
Kanakapura Basavaiah
Keyword(s):  
Correlation Coefficients ◽  
Reference Method ◽  
Pharmaceutical Formulations ◽  
Fixed Amount ◽  
Spectrophotometric Methods ◽  
Bulk Drug ◽  
Orange Color ◽  
Yellowish Orange

Three simple and sensitive spectrophotometric methods are proposed for the determination of atenolol (ATN) in bulk drug and tablets. The methods are based on the bromination of ATN by the bromine generatedin situby the action of the acid on the bromate–bromide mixture followed by the determination of unreacted bromine by reacting with a fixed amount of either meta-cresol purple (MCP) and measuring the absorbance at 540 nm (method A) and 445 nm (method B) or erioglaucine (EGC) and measuring the absorbance at 630 nm (method C). Beer's law is valid within the concentration ranges of 1.0–20.0, 2.0–40.0 and 1.0–8.0 μg/mL for method A, method B and method C, respectively. The calculated molar absorptivities were found to be 1.20×104, 4.51×103and3.46×104  L/mol⋅cmfor method A, method B and method C, respectively. Sandell’s sensitivity values, correlation coefficients, limits of detection and quantification are also reported. Recovery results were statistically compared with those of a reference method by applying Student’st- andF-test. The novelty of the present study is the measurement of two different colors using MCP, that is, red-pink color of MCP in acid medium at 540 nm and yellowish-orange color of brominated MCP at 445 nm.

scholarly journals Of bromination reaction for the spectrophotometric assay of domperidone in pharmaceuticals

2011 ◽  
Vol 17 (1) ◽  
pp. 81-89 ◽  
Author(s):  
Zenita Devi ◽  
K. Basavaiah ◽  
K.B. Vinay
Keyword(s):  
Limit Of Detection ◽  
Pharmaceutical Preparations ◽  
Reference Method ◽  
Standard Addition ◽  
Limit Of Quantification ◽  
Fixed Amount ◽  
Spectrophotometric Methods ◽  
Significant Difference ◽  
Bulk Drug

Three simple and sensitive spectrophotometric methods are described for the determination of domperidone (DOM) in bulk drug and in dosage forms using bromate-bromide mixture as brominating agent in acid medium and three dyes, meta-cresol purple (MCP), amaranth (AMR) and erioglaucine (EGC). The methods involve the addition of a known excess of bromate-bromide mixture to an acidified solution of DOM followed by the determination of the residual bromine by reacting with a fixed amount of either MCP dye and measuring the absorbance at 530 nm (method A) or AMR dye and measuring the absorbance at 520 nm (method B) or EGC dye and measuring the absorbance at 630 nm (method C). Beer?s law is obeyed over the concentration ranges, 0.63 - 10.0, 0.25-4.0 and 0.13-2.0 ?g mL-1 for method A, method B and method C, respectively. The apparent molar absorptivities are calculated to be 3.751 ? 104, 6.604 ? 104 and 1.987 ? 105 L mol-1cm-1 for method A, method B and method C, respectively and the corresponding sandell sensitivity values are 0.011, 0.006 and 0.002 ?g cm-2. The limit of detection and the limit of quantification are also reported for all the three methods. No interference was observed from common additives found in pharmaceutical preparations. Statistical comparisons of the results with those of the reference method showed an excellent agreement, and indicated no significant difference in accuracy and precision. The accuracy and reliability of the methods were further ascertained by performing recovery tests via standard-addition technique.

Sign in / Sign up

Export Citation Format

Share Document