scholarly journals Impact of management practices on Italian ryegrass seed quality

2010 ◽  
Vol 55 (2) ◽  
pp. 131-140
Author(s):  
Aleksandar Simic ◽  
Savo Vuckovic ◽  
Branko Cupina ◽  
Djordje Krstic ◽  
Rade Stanisavljevic ◽  
...  
Keyword(s):  
Environmental Conditions ◽  
Seed Weight ◽  
Management Practices ◽  
Field Experiments ◽  
Seed Quality ◽  
Italian Ryegrass ◽  
Considerable Influence ◽  
Nitrogen Rates ◽  
Thousand Seed Weight

Thousand-seed weight and total germination from the first production year and two seed harvests were measured in tetraploid Italian ryegrass (cv. Tetraflorum) to study variations in seed quality. Four-year field experiments were carried out (2002-2006) in western Serbia and Italian ryegrass was established with three row spacings (20, 40 and 60 cm), four seeding rates (5, 10, 15 and 20 kg ha-1) and using four spring nitrogen rates (0, 50, 100 and 150 kg ha-1). High seed quality was obtained, except for the first experimental year (2003) and the second seed harvests which yielded the seed of unsatisfactory quality and validity. Applied factors and treatments did not change seed quality significantly unlike environmental conditions of production years which had considerable influence on seed quality.

scholarly journals Management practices effect on seed features of Italian ryegrass following storage period

2014 ◽  
Vol 30 (1) ◽  
pp. 145-152 ◽  
Author(s):  
V. Mandic ◽  
A. Simic ◽  
S. Vuckovic ◽  
R. Stanisavljevic ◽  
Z. Tomic ◽  
...  
Keyword(s):  
Management Practices ◽  
Seed Quality ◽  
Storage Period ◽  
Germination Percentage ◽  
Italian Ryegrass ◽  
Row Spacing ◽  
Ambient Conditions ◽  
Seeding Rate ◽  
Storage Duration ◽  
Germination Energy

Italian ryegrass seed crop was established in 2007 with two sowing densities (D1 = 60 cm row spacing and 5 kg ha-1 seeding rate; D2 = 20 cm row spacing and 20 kg ha-1 seeding rate) and using two spring nitrogen rates (0 and 150 kg N ha-1). Seed germination and thousand seed weight (TSW) of Italian ryegrass was observed in first production year. After harvest in June, seeds were stored under standard storage conditions and sampled 90 days after harvest (DAH), and then 2000 DAH. At 90 DAH, seeds were tested for TSW, as well as germination energy and total germination percentage at incubation temperatures of 10, 15, 20 and 25?C. Ryegrass seeds had the best germination energy 90 DAH at 20?C and maximum total germination at 15?C, which implies that early autumn (September-October) is proper sowing period for freshly harvested seeds of Italian ryegrass. Italian ryegrass seeds could maintain satisfactory germination energy (59.3%) and total germination (77.3%) up to 2000 DAH. High seed quality was obtained and applied treatments did not change seed quality significantly unlike storage period which had considerable influence on seed quality. The data can serve for the determination of a proper storage duration management between harvest and sowing of the tested species under ambient conditions of Serbia.

scholarly journals Effect of Row Spacing on Seed Yield, Yield Components and Seed Quality of Alfalfa

2015 ◽  
Vol 15 (1) ◽  
pp. 85
Author(s):  
Dragoljub Beković ◽  
Rade Stanisavljević ◽  
Milan Biberdžić ◽  
Slaviša Stojković ◽  
Jasmina Knežević
Keyword(s):  
Seed Yield ◽  
Yield Components ◽  
Seed Weight ◽  
Seed Quality ◽  
Germination Rate ◽  
Row Spacing ◽  
Grain Number ◽  
Alfalfa Seed ◽  
Thousand Seed Weight

Under agro-environmental conditions of Southern Serbia, the re­search was conducted over a three-year period to evaluate the effect of row spacing on seed yield, yield components and seed quality of alfalfa cv. ’K-23’. The average seed yield of alfalfa was highest at a row spacing of 40 cm (271.7 kg ha-1), followed by row spacing of 20 cm (249.4 kg ha-1) and 60 cm (244.0 kg ha-1). The highest and lowest number of inflo­rescences per stem were obtained in rows spaced 60 cm (13.37 inflo­rescences/stem) and 20 cm apart (8.57 inflorescences/stem), respectively. The widest row spacing of 60 cm (7.15 pods / inflorescence) resulted in the highest number of pods per inflorescence, whereas the lowest number was produced at 20 cm spacing (5.50 pods / inflorescence). Grain number per pod ranged from 3.55 (at 20 cm row spacing) to 4.05 (at 60 cm). The highest quality of alfalfa seed during the three years of the research was obtained at the widest row spacing (60 cm). Thousand-seed weight was highest at 60 cm and lowest at 20 cm (1.97 g and 2.07 g, respectively). The highest average values for seed germination rate were reported for 60 cm row spa­cing (88.00%) and the lowest for 20 cm row spacing (85.76 %).

scholarly journals Ploidy and cultivar group differences in the thousand-seed weight of red fescue (Festuca rubra L.)

1996 ◽  
Vol 76 (3) ◽  
pp. 465-467
Author(s):  
N. A. Fairey ◽  
L. P. Lefkovitch
Keyword(s):  
Key Words ◽  
Seed Weight ◽  
Seed Quality ◽  
Group Differences ◽  
Festuca Rubra ◽  
Red Fescue ◽  
Cultivar Group ◽  
Cultivar Groups ◽  
Thousand Seed Weight ◽  
Ploidy Status

Three major cultivar groups of red fescue (Festuca rubra L.) are recognized, viz. strongly creeping and octoploid, slender creeping and hexaploid, and non-creeping and hexaploid (Chewings), but a thousand-seed weight (TSW) of 0.74 g is often used commercially for the species. Based on 12 cultivars/group, the TSW of the strongly creeping group (1.225 g) was significantly higher than the slender creeping group (0.894 g) and the Chewings group (0.936 g); the higher TSW was probably a consequence of the higher ploidy status. The TSW of 0.74 g is not characteristic of many contemporary red fescue cultivars, particularly the strongly creeping octoploids. Key words: Red fescue, Festuca rubra L., ploidy, seed weight, seed quality

Multiple Herbicide–Resistant Italian Ryegrass [Lolium perenne L. spp. multiflorum (Lam.) Husnot] in California Perennial Crops: Characterization, Mechanism of Resistance, and Chemical Management

Weed Science ◽  
2018 ◽  
Vol 66 (6) ◽  
pp. 696-701 ◽  
Author(s):  
Caio A. C. G. Brunharo ◽  
Bradley D. Hanson
Keyword(s):  
Lolium Perenne ◽  
Dose Response ◽  
Weed Management ◽  
Management Practices ◽  
Field Experiments ◽  
Italian Ryegrass ◽  
Perennial Crop ◽  
Management Options ◽  
Herbicide Resistant ◽  
Chemical Management

AbstractItalian ryegrass [Lolium perenne L. spp. multiflorum (Lam.) Husnot] is a troublesome weedy species in many regions of California. Its control has been chiefly dependent on herbicides due to their effectiveness and practicality and, as result, herbicide-resistant populations have been selected. Poor control of a population of L. multiflorum with paraquat was recently reported in a prune orchard in Hamilton City, CA. A series of experiments were carried out to characterize the response of this population to several POST herbicides, study the mechanisms of resistance, and investigate alternative chemical management options in tree crops. A known susceptible (S) and the suspected resistant population (PRHC) were subjected to greenhouse dose–response experiments with clethodim, fluazifop-P-butyl, glufosinate, glyphosate, paraquat, pyroxsulam, rimsulfuron, and sethoxydim. A 310-bp fragment of the EPSPS gene containing position 106 was sequenced from PRHC and S. Field experiments were carried out in a prune orchard with PRE herbicides commonly used by perennial crop growers in California. Greenhouse dose–response experiments confirmed that PRHC is resistant to paraquat, as well as multiply resistant to clethodim and glyphosate. The EPSPS gene of PRHC is heterozygous for glyphosate resistance at position 106, where one allele exhibited proline substituted by serine and the other by alanine. Field experiments with PRE herbicides indicated that tank mixes containing indaziflam and flumioxazin can provide adequate L. multiflorum control up to 150 d after treatment. Poor weed management practices, such as overreliance on a single site of action, have frequently been associated with the selection of herbicide-resistant L. multiflorum populations around the world, and adequate herbicide-resistance management programs are necessary for growers to maintain economic sustainability even after evolution of herbicide-resistant weeds in their fields.

scholarly journals Sorghum [Sorghum bicolor (L.) Moench] seed quality as affected by variety, harvesting stage and fertilizer application in Bomet County of Kenya

2013 ◽  
Vol 13 (59) ◽  
pp. 7905-7926
Author(s):  
LA Ochieng ◽  
◽  
PW Mathenge ◽  
R Muasya ◽  
◽  
...  
Keyword(s):  
Sorghum Bicolor ◽  
Seed Weight ◽  
Management Practices ◽  
Seed Quality ◽  
Block Design ◽  
Fertilizer Application ◽  
Seed Selection ◽  
Seed Vigour ◽  
Field Emergence ◽  
Sorghum Bicolor L

A set of laboratory experiments were conducted to evaluate the physiological quality of Sorghum bicolor (L.) Moench seeds subjected to different field cultural management practices. The main aim of this study was to contribute towards improved production of Sorghum bicolor (L.) Moench through better understanding of the crop’s agronomy. The experimental design was a three factorial split-split block design in the rain fed Sorghum bicolor (L.) Moench producing areas of Bomet County of Kenya. Treatments within the block were randomized. There were three factors which included variety at two levels (improved and local varieties); fertilizer application at two levels (with and without fertilizer); and seed selection at three levels (continuous, from booting stage and at harvest). Percentages of crop emergence and days to 50% physiological maturity were determined. The following seed quality tests were carried out: 1000-seed weight, standard germination, mean germination time and electrical conductivity. The improved variety had a field emergence of 100% while that of the local variety ranged from 60 - 97%. In regard to field emergence and maturity, there were significance differences (P≤ 0.001) between plots with fertilizer and those without regardless of the variety. Those plots with fertilizer outperformed those without. Germination and vigour tests indicated that seed selection time did not influence seed vigour, viability and yield (P ≤ 0.05). However, there were significant differences (P ≤ 0.001) between the improved variety (E1291) and local (Ochuti) variety. In relation to this, variety E1291 showed better seed vigour, viability and yield as compared to Ochuti. Similarly, there were significant differences (P ≤ 0.001) between plots to which fertilizer was applied and those without. Fertilizer application led to an increase in seed yield, seed weight, seed vigour and viability. It was therefore concluded that (i) E1291 was more adapted to the study area as compared to Ochuti and hence should be adopted by farmers; (ii) farmers should apply optimal phosphate and nitrogenous fertilizers to their soils so as to increase the quality and yield of their seed; and (iii) farmers could continue selecting their seed using their indigenous knowledge.

Yield and Seed quality of barley (Hordeum vulgare L.) as affected by variety, nitrogen level and harvesting time

2014 ◽  
Vol 2 (2) ◽  
pp. 93-100
Author(s):  
Shahnaj Yesmina ◽  
Moushumi Akhtarb ◽  
Belal Hossain
Keyword(s):  
Grain Yield ◽  
Seed Weight ◽  
Seed Quality ◽  
Quality Parameters ◽  
Nitrogen Level ◽  
Yield Attributes ◽  
Harvesting Time ◽  
Nitrogen Levels ◽  
Vigour Index

The experiment was conducted to find out the effect of variety, nitrogen level and harvesting time on yield and seed quality of barley. The treatments used in the experiment consisted of two varieties viz. BARI Barley 4 and BARI Barley 5, three harvesting time viz. 35, 40 and 45 Days after Anthesis (DAA) and nitrogen levels viz. 0, 70, 85 and 100 kg N ha-1 . The experiment was laid out in a spilt- spilt-plot design with three replications assigning the variety to the main plot, harvesting time to the sub-plots and nitrogen level to the sub-sub plots. Variety had significant effects on the all yield attributes except fertile seeds spike-1 . Seed quality parameters viz. normal seeds spike-1 , deformed seeds spike-1 , germination (%) and vigour index were statistically significant. The variety BARI Barley 5 produced higher grain yield and seed quality than BARI Barley 4. Grain yield from BARI Barley 5 and BARI Barley 4 were 4.59 t ha-1 and 4.24 t ha-1 , respectively. Significantly, the highest 1000-seed weight (46.90 g) was produced by BARI Barley 5 than (37.90 g) BARI Barley 4. The result revealed that harvesting time had significant effect on yield and yield attributes and seed quality parameters. Seed yield was highest (4.65 t ha-1 ) when the crop harvested at 40 DAA and it was increased linearly from 35 DAA. Maximum quality seed and 1000-seed weight (43.20 g) was obtained when the crop harvested at 40 DAA. All the yields, yield attributes and seed quality parameters were significantly influenced by nitrogen levels. The highest grain yield (5.14 t ha-1 ) was obtained when BARI Barley 5 variety was fertilized by 100 kg N ha-1 and the lowest (3.14 t ha-1 ) was obtained from control treatments. Normal seeds spike-1 , vigour index, germination (%) were better at 85 kg N ha-1 in variety of BARI Barley 5 than BARI Barley 4. So it can be concluded that BARI Barley 5 showed better result when fertilized with 100 kg N ha-1 and harvested at 40 DAA for getting maximum yield and 85 kg N ha-1 and harvested at 40 DAA for getting better quality seed.

scholarly journals Effects of Interspecific Chromosome Substitution in Upland Cotton on Cottonseed Macronutrients

Plants ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 1158
Author(s):  
Nacer Bellaloui ◽  
Sukumar Saha ◽  
Jennifer L. Tonos ◽  
Jodi A. Scheffler ◽  
Johnie N. Jenkins ◽  
...  
Keyword(s):  
South Carolina ◽  
Upland Cotton ◽  
Field Experiments ◽  
Seed Quality ◽  
Recurrent Parent ◽  
Chromosome Substitution ◽  
Substitution Lines ◽  
Chromosome Substitution Lines ◽  
Macronutrient Content ◽  
Chromosome Arm

Nutrients, including macronutrients such as Ca, P, K, and Mg, are essential for crop production and seed quality, and for human and animal nutrition and health. Macronutrient deficiencies in soil lead to poor crop nutritional qualities and a low level of macronutrients in cottonseed meal-based products, leading to malnutrition. Therefore, the discovery of novel germplasm with a high level of macronutrients or significant variability in the macronutrient content of crop seeds is critical. To our knowledge, there is no information available on the effects of chromosome or chromosome arm substitution on cottonseed macronutrient content. The objective of this study was to evaluate the effects of chromosome or chromosome arm substitution on the variability and content of the cottonseed macronutrients Ca, K, Mg, N, P, and S in chromosome substitution lines (CS). Nine chromosome substitution lines were grown in two-field experiments at two locations in 2013 in South Carolina, USA, and in 2014 in Mississippi, USA. The controls used were TM-1, the recurrent parent of the CS line, and the cultivar AM UA48. The results showed major variability in macronutrients among CS lines and between CS lines and controls. For example, in South Carolina, the mean values showed that five CS lines (CS-T02, CS-T04, CS-T08sh, CS-B02, and CS-B04) had higher Ca level in seed than controls. Ca levels in these CS lines varied from 1.88 to 2.63 g kg−1 compared with 1.81 and 1.72 g kg−1 for TM-1 and AMUA48, respectively, with CS-T04 having the highest Ca concentration. CS-M08sh exhibited the highest K concentration (14.50 g kg−1), an increase of 29% and 49% over TM-1 and AM UA48, respectively. Other CS lines had higher Mg, P, and S than the controls. A similar trend was found at the MS location. This research demonstrated that chromosome substitution resulted in higher seed macronutrients in some CS lines, and these CS lines with a higher content of macronutrients can be used as a genetic tool towards the identification of desired seed nutrition traits. Also, the CS lines with higher desired macronutrients can be used as parents to breed for improved nutritional quality in Upland cotton, Gossypium hirsutum L., through improvement by the interspecific introgression of desired seed nutrient traits such as Ca, K, P, S, and N. The positive and significant (p ≤ 0.0001) correlation of P with Ca, P with Mg, S with P, and S with N will aid in understanding the relationships between nutrients to improve the fertilizer management program and maintain higher cottonseed nutrient content.

scholarly journals Genetic variation of seed phosphorus concentration in winter oilseed rape and development of a NIRS calibration

Euphytica ◽  
2021 ◽  
Vol 217 (4) ◽  
Author(s):  
Jakob Eifler ◽  
Jürgen Enno Wick ◽  
Bernd Steingrobe ◽  
Christian Möllers
Keyword(s):  
Genetic Variation ◽  
Field Experiments ◽  
Seed Quality ◽  
Rapeseed Meal ◽  
Quality Analysis ◽  
Phosphorus Concentration ◽  
Genotypic Differences ◽  
Organic P ◽  
P Concentration ◽  
Total P

AbstractPhytic acid is the major organic phosphorus storage compound in rapeseed. Following oil extraction, the defatted meal is used in feed mixtures for livestock. However, monogastric pigs and chickens can only poorly metabolize phytate. Hence, their excrements are rich in phosphorus (P), which when applied as manure may lead to eutrophication of surface waters. The aim of the present study was to analyze the genetic variation for total and organic P concentration (i.e. mainly phytate) in rapeseed and to compare the results with soybean. Two sets of rapeseed material were tested in field experiments in different environments with varying soil P levels and harvested seeds were used for seed quality analysis. Results revealed significant genotypic differences in total seed P concentration, which ranged from 0.47 to 0.94%. Depending on the experiment, the heritability for total P concentration ranged from 52 to 93%. The organic P portion of total P concentration was above 90% for current rapeseed hybrids. In both sets, there was a significant positive correlation between seed protein and P concentration. A NIRS calibration for total P concentration in intact seeds showed in cross validation a standard error of 0.05% and a coefficient of determination of R2 = 0.83. Total P concentration of soybean seeds and meal was between 0.55 and 0.65%, and around 1.1% for rapeseed meal. Rapeseed meal had a twofold higher ratio of total P to nitrogen concentration as compared to soybean which could be considered adverse when the meal is used for feeding livestock.

Assessment of sowing dates and plant densities using CSM-CROPGRO-Soybean for soybean maturity groups in low latitude

2021 ◽  
pp. 1-14
Author(s):  
L. S. Sampaio ◽  
R. Battisti ◽  
M. A. Lana ◽  
K. J. Boote
Keyword(s):  
Management Practices ◽  
Field Experiments ◽  
Plant Density ◽  
Crop Model ◽  
Management Scenarios ◽  
Low Latitude ◽  
Area Index ◽  
Sowing Dates ◽  
Plant Densities ◽  
Maturity Groups

Abstract Crop models can be used to explain yield variations associated with management practices, environment and genotype. This study aimed to assess the effect of plant densities using CSM-CROPGRO-Soybean for low latitudes. The crop model was calibrated and evaluated using data from field experiments, including plant densities (10, 20, 30 and 40 plants per m2), maturity groups (MG 7.7 and 8.8) and sowing dates (calibration: 06 Jan., 19 Jan., 16 Feb. 2018; and evaluation: 19 Jan. 2019). The model simulated phenology with a bias lower than 2 days for calibration and 7 days for evaluation. Relative root mean square error for the maximum leaf area index varied from 12.2 to 31.3%; while that for grain yield varied between 3 and 32%. The calibrated model was used to simulate different management scenarios across six sites located in the low latitude, considering 33 growing seasons. Simulations showed a higher yield for 40 pl per m2, as expected, but with greater yield gain increments occurring at low plant density going from 10 to 20 pl per m2. In Santarém, Brazil, MG 8.8 sown on 21 Feb. had a median yield of 2658, 3197, 3442 and 3583 kg/ha, respectively, for 10, 20, 30 and 40 pl per m2, resulting in a relative increase of 20, 8 and 4% for each additional 10 pl per m2. Overall, the crop model had adequate performance, indicating a minimum recommended plant density of 20 pl per m2, while sowing dates and maturity groups showed different yield level and pattern across sites in function of the local climate.

Sign in / Sign up

Export Citation Format

Share Document