scholarly journals Control of functional electrical stimulation for restoration of motor function

2017 ◽  
Vol 30 (3) ◽  
pp. 295-312
Author(s):  
Dejan Popovic
Keyword(s):  
Biological Control ◽  
Electrical Stimulation ◽  
Functional Electrical Stimulation ◽  
Control Method ◽  
Level Structure ◽  
Open Loop ◽  
Model Based Control ◽  
Model Based ◽  
Assistive Systems ◽  
Artificial Control

An injury or disease of the central nervous system (CNS) results in significant limitations in the communication with the environment (e.g., mobility, reaching and grasping). Functional electrical stimulation (FES) externally activates the muscles; thus, can restore several motor functions and reduce other health related problems. This review discusses the major bottleneck in current FES which prevents the wider use and better outcome of the treatment. We present a control method that we continually enhance during more than 30 years in the research and development of assistive systems. The presented control has a multi-level structure where upper levels use finite state control and the lower level implements model based control. We also discuss possible communication channels between the user and the controller of the FES. The artificial controller can be seen as the replica of the biological control. The principle of replication is used to minimize the problems which come from the interplay of biological and artificial control in FES. The biological control relies on an extensive network of neurons sending the output signals to the muscles. The network is being trained though many the trial and error processes in the early childhood, but staying open to changes throughout the life to satisfy the particular needs. The network considers the nonlinear and time variable properties of the motor system and provides adaptation in time and space. The presented artificial control method implements the same strategy but relies on machine classification, heuristics, and simulation of model-based control. The motivation for writing this review comes from the fact that many control algorithms have been presented in the literature by the authors who do not have much experience in rehabilitation engineering and had never tested the operations with patients. Almost all of the FES devices available implement only open-loop, sensory triggered preprogrammed sequences of stimulation. The suggestion is that the improvements in the FES devices need better controllers which consider the overall status of the potential user, various effects that stimulation has on afferent and efferent systems, reflexive responses to the FES and direct responses to the FES by non-stimulated sensory-motor systems, and the greater integration of the biological control.

Model-Based Control of a Pressure-Compensated Directional Valve With Significant Dead-Zone

2019 ◽  
Author(s):  
Santeri Lampinen ◽  
Janne Koivumäki ◽  
Jouni Mattila ◽  
Jouni Niemi
Keyword(s):  
Control Method ◽  
Dead Zone ◽  
Open Loop ◽  
Mobile Manipulators ◽  
Hydraulic Systems ◽  
Loop Control ◽  
Model Based Control ◽  
Control Valves ◽  
Model Based ◽  
Directional Control

Abstract Hydraulic systems on mobile manipulators and industrial systems often come equipped with pressure-compensated proportional directional control valves with significant dead-zone. These kind of hydraulic valves are well suited for open-loop applications with an operator in control. However, designing closed-loop control for such systems is a challenging task. In this study, we propose a model-based control method for such valves to increase the performance of the current state-of-the-art in industrial robotic manipulator control. The proposed control method rigorously addresses the dynamics of a hydraulic manipulator system with dead-zone compensation for pressure-compensated directional control valves. The proposed method is evaluated with experiments on a commercial heavy-duty breaker boom with Sauer-Danfoss PVG 120 valves. The experimental results show accurate control of the manipulator despite the used slow-response load sensing valves.

Model-Based Control of Combustion Instabilities

2005 ◽  
Author(s):  
Aimee S. Morgans ◽  
Ann P. Dowling
Keyword(s):  
Transfer Function ◽  
Controller Design ◽  
Open Loop ◽  
Operating Conditions ◽  
Combustion Instabilities ◽  
Lean Premixed Combustion ◽  
Model Based Control ◽  
Model Based ◽  
Loop Transfer Function ◽  
Mathematical Approximation

Model-based control has been successfully implemented on an atmospheric pressure lean premixed combustion rig. The rig incorporated a pressure transducer in the combustor to provide a sensor measurement, with actuation provided by a fuel valve. Controller design was based on experimental measurement of the open loop transfer function. This was achieved using a valve input signal which was the sum of an identification signal and a control signal from an empirical controller to eliminate the non-linear limit cycle. The transfer function was measured for the main instability occurring at a variety of operating conditions, and was found to be fairly similar in all cases. Using Nyquist and H∞-loop shaping techniques, several robust controllers were designed, based on a mathematical approximation to the measured transfer function. These were implemented experimentally on the rig, and were found to stabilise it under a variety of operating conditions, with a greater reduction in the pressure spectrum than had been achieved by the empirical controller.

EVALUATION OF CLOSED-LOOP CONTROL SYSTEM FOR RESTORING STANDING AND SITTING FUNCTIONS BY FUNCTIONAL ELECTRICAL STIMULATION

2005 ◽  
Vol 17 (01) ◽  
pp. 19-26 ◽  
Author(s):  
CHENG-LIANG LIU ◽  
CHUNG-HUANG YU ◽  
SHIH-CHING CHEN ◽  
CHANG-HUNG CHEN
Keyword(s):  
Electrical Stimulation ◽  
Functional Electrical Stimulation ◽  
Closed Loop ◽  
Spinal Cord Injuries ◽  
Control Method ◽  
Control Strategies ◽  
Evaluation Process ◽  
Closed Loop Control ◽  
Loop Control ◽  
Loop Control System

Functional electrical stimulation (FES) is a method for restoring the functional movements of paraplegic or patients with spinal cord injuries. However, the selection of parameters that control the restoration of standing up and sitting functions has not been extensively investigated. This work provides a method for choosing the four main items involved in evaluating the strategies for sit-stand-sit movements with the aid of a modified walker. The control method uses the arm-supported force and the angles of the legs as feedback signals to change the intensity of the electrical stimulation of the leg muscles. The control parameters, Ki and Kp, are vary for different control strategies. Four items are collected through questionnaires and used for evaluation. They are the maximum reactions of the two hands, the average reaction of the two hands, largest absolute angular velocity of the knee joints, and the sit-stand-sit duration time. The experimental data are normalized to facilitate comparison. Weighting factors are obtained and analyzed from questionnaires answered by experts and are added to evaluation process for manipulation. The results show that the best strategy is the closed-loop control with parameters Ki=0.5 and Kp=0.

Model Based Temperature Control in RTP Yielding ±0.1 °C accuracy on A 1000 °C, 2 second, 100 °C/s Spike Anneal

1998 ◽  
Vol 525 ◽  
Author(s):  
Peter Vandenabeele ◽  
Wayne Renken
Keyword(s):  
Differential Equations ◽  
Temperature Control ◽  
Control Method ◽  
Nonlinear Differential Equations ◽  
System Response ◽  
Model Based Control ◽  
First Order ◽  
Model Based ◽  
Measured System ◽  
Spike Anneal

ABSTRACTA Model Based Control method is presented for accurate control of RTP systems. The model uses 4 states: lamp filament temperature, wafer temperature, quartz temperature and TC temperature. A set of 4 first order, nonlinear differential equations describes the model. Feedback is achieved by updating the model, based on a comparison between actual (measured) system response and modeled system response.

scholarly journals An Approach to Applying Feedback Error Learning for Functional Electrical Stimulation Controller: Computer Simulation Tests of Wrist Joint Control

2010 ◽  
Vol 2010 ◽  
pp. 1-8 ◽  
Author(s):  
Takashi Watanabe ◽  
Keisuke Fukushima
Keyword(s):  
Computer Simulation ◽  
Electrical Stimulation ◽  
Functional Electrical Stimulation ◽  
Inverse Dynamics ◽  
Wrist Joint ◽  
Open Loop ◽  
Joint Control ◽  
Feedback Error Learning ◽  
Feedback Error ◽  
Error Learning

Feedback error-learning (FEL) controller that consists of a proportional-integral-derivative (PID) controller and an artificial neural network (ANN) had applicability to functional electrical stimulation (FES). Because of the integral (reset) windup, however, delay or overshoot sometimes occurred in feedback FES control, which was considered to cause inappropriate ANN learning and to limit the feasibility of the FEL controller for FES to controlling 1-DOF movements stimulating 2 muscles. In this paper, an FEL-FES controller was developed applying antireset windup (ARW) scheme that worked based on total controller output. The FEL-FES controller with the ARW was examined in controlling 2-DOF movements of the wrist joint stimulating 4 muscles through computer simulation. The developed FEL-FES controller was found to realize appropriately inverse dynamics model and to have a possibility of being used as an open-loop controller. The developed controller would be effective in multiple DOF movement control stimulating several muscles.

Sign in / Sign up

Export Citation Format

Share Document