scholarly journals Plasmonic enhancement of light trapping in photodetectors

2014 ◽  
Vol 27 (2) ◽  
pp. 183-203 ◽  
Author(s):  
Zoran Jaksic ◽  
Marko Obradov ◽  
Slobodan Vukovic ◽  
Milivoj Belic

We consider the possibility to use plasmonics to enhance light trapping in such semiconductor detectors as solar cells and infrared detectors for night vision. Plasmonic structures can transform propagating electromagnetic waves into evanescent waves with the local density of states vastly increased within subwavelength volumes compared to the free space, thus surpassing the conventional methods for photon management. We show how one may utilize plasmonic nanoparticles both to squeeze the optical field into the active region and to increase the optical path by Mie scattering, apply ordered plasmonic nanocomposites (subwavelength plasmonic crystals or plasmonic metamaterials), or design nanoantennas to maximize absorption within the detector. We show that many approaches used for solar cells can be also utilized in infrared range if different redshifting strategies are applied.

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Sayan Seal ◽  
Vinay Budhraja ◽  
Liming Ji ◽  
Vasundara V. Varadan

Incorporating plasmonic structures into the back spacer layer of thin film solar cells (TFSCs) is an efficient way to improve their performance. The fishnet structure is used to enhance light trapping. Unlike other previously suggested discrete plasmonic particles, the fishnet is an electrically connected wire mesh that does not result in light field localization, which leads to high absorption losses. The design was verified experimentally. A silver fishnet structure was fabricated using electron beam lithography (EBL) and thermal evaporation. The final fabricated structure optically resembles a TFSC. The results predicted by numerical simulations were reproduced experimentally on a fabricated sample. We show that light absorption in the a-Si absorber layer is enhanced by a factor of 10.6 at the design wavelength of 690 nm due to the presence of the fishnet structure. Furthermore, the total absorption over all wavelengths was increased by a factor of 3.2. The short-circuit current of the TFSC was increased by 30% as a result of including the fishnet.


2020 ◽  
Vol 64 (4) ◽  
pp. 808-819
Author(s):  
Shenya Qu ◽  
Jiangsheng Yu ◽  
Jinru Cao ◽  
Xin Liu ◽  
Hongtao Wang ◽  
...  

Coatings ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 404
Author(s):  
Abdul Sami ◽  
Arsalan Ansari ◽  
Muhammad Dawood Idrees ◽  
Muhammad Musharraf Alam ◽  
Junaid Imtiaz

Perovskite inorganic-organic solar cells are fabricated as a sandwich structure of mesostructured TiO2 as electron transport layer (ETL), CH3NH3PbI3 as active material layer (AML), and Spiro-OMeTAD as hole transport layer (HTL). The crystallinity, structural morphology, and thickness of TiO2 layer play a crucial role to improve the overall device performance. The randomly distributed one dimensional (1D) TiO2 nanowires (TNWs) provide excellent light trapping with open voids for active filling of visible light absorber compared to bulk TiO2. Solid-state photovoltaic devices based on randomly distributed TNWs and CH3NH3PbI3 are fabricated with high open circuit voltage Voc of 0.91 V, with conversion efficiency (CE) of 7.4%. Mott-Schottky analysis leads to very high built-in potential (Vbi) ranging from 0.89 to 0.96 V which indicate that there is no depletion layer voltage modulation in the perovskite solar cells fabricated with TNWs of different lengths. Moreover, finite-difference time-domain (FDTD) analysis revealed larger fraction of photo-generated charges due to light trapping and distribution due to field convergence via guided modes, and improved light trapping capability at the interface of TNWs/CH3NH3PbI3 compared to bulk TiO2.


Sign in / Sign up

Export Citation Format

Share Document