scholarly journals Comparasion of prediction and measurement methods for sound insulation of lightweight partitions

2012 ◽  
Vol 10 (2) ◽  
pp. 155-167 ◽  
Author(s):  
Momir Prascevic ◽  
Dragan Cvetkovic ◽  
Darko Mihajlov
Keyword(s):  
Transmission Loss ◽  
Road Traffic ◽  
Theoretical Models ◽  
Measurement Methods ◽  
Experimental Results ◽  
Sound Insulation ◽  
Acoustic Absorption ◽  
Noise Levels ◽  
Overall Design ◽  
Acoustic Comfort

It is important to know the sound insulation of partitions in order to be able to compare different constructions, calculate acoustic comfort in apartments or noise levels from outdoor sources such as road traffic, and find engineer optimum solutions to noise problems. The use of lightweight partitions as party walls between dwellings has become common because sound insulation requirements can be achieved with low overall surface weights. However, they need greater skill to design and construct, because the overall design is much more complex. It is also more difficult to predict and measure of sound transmission loss of lightweight partitions. There are various methods for predicting and measuring sound insulation of partitions and some of them will be described in this paper. Also, this paper presents a comparison of experimental results of the sound insulation of lightweight partitions with results obtained using different theoretical models for single homogenous panels and double panels with and without acoustic absorption in the cavity between the panels.

scholarly journals Analysis of the transmission loss of double-leaf panels with an equivalent spring–mass model for studs

2020 ◽  
Vol 37 ◽  
pp. 126-133
Author(s):  
Yuan-Wei Li ◽  
Chao-Nan Wang
Keyword(s):  
Distribution Curve ◽  
Transmission Loss ◽  
Sound Transmission ◽  
Experimental Results ◽  
Sound Insulation ◽  
Sound Transmission Loss ◽  
Mass Model ◽  
Steel Stud ◽  
Panel Thickness ◽  
Stiffness Distribution

Abstract The purpose of this study was to investigate the sound insulation of double-leaf panels. In practice, double-leaf panels require a stud between two surface panels. To simplify the analysis, a stud was modeled as a spring and mass. Studies have indicated that the stiffness of the equivalent spring is not a constant and varies with the frequency of sound. Therefore, a frequency-dependent stiffness curve was used to model the effect of the stud to analyze the sound insulation of a double-leaf panel. First, the sound transmission loss of a panel reported by Halliwell was used to fit the results of this study to determine the stiffness of the distribution curve. With this stiffness distribution of steel stud, some previous proposed panels are also analyzed and are compared to the experimental results in the literature. The agreement is good. Finally, the effects of parameters, such as the thickness and density of the panel, thickness of the stud and spacing of the stud, on the sound insulation of double-leaf panels were analyzed.

SOUND INSULATION OF A MECHANICAL WORKSHOP

2014 ◽  
Vol 4 (2) ◽  
Author(s):  
ZORAN PETROVIĆ ◽  
BRANKO RADIČEVIĆ ◽  
MILAN KOLAREVIĆ ◽  
VLADAN GRKOVIĆ
Keyword(s):  
Theoretical Model ◽  
Key Words ◽  
Design Process ◽  
Experimental Results ◽  
Sound Insulation ◽  
Housing Estate ◽  
Noise Levels ◽  
Acoustic Insulation

The paper presents a design process related to sound insulation of a small mechanical workshop for storing eccentric presses, which is located in a densely populated housing estate. Starting from the theoretical model of acoustic insulation power of a single solid partition, a complex partition and a multi-layer partition, the acoustic insulation power of the walls and the ceiling in the workshop was determined. The results of calculation of workshop isolation coincide to a great extent with the experimental results of measuring noise levels. Key words: noise, mechanical workshop, sound insulation

Road Traffic Noise Levels at Different Types of Residential Areas in Nibong Tebal, Penang

2019 ◽  
Vol 11 (1) ◽  
Author(s):  
Herni Halim ◽  
◽  
Nur Fatin Najiyah Hamid ◽  
Mohamad Firdaus Mahamad Yusob ◽  
Nur Atiqah Mohamad Nor ◽  
...  
Keyword(s):  
Road Traffic ◽  
Traffic Noise ◽  
Road Traffic Noise ◽  
Residential Areas ◽  
Noise Levels ◽  
Different Types

scholarly journals Intentions versus Outcomes: Cooperation and Fairness in a Sequential Prisoner’s Dilemma with Nature

Games ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 58
Author(s):  
Garret Ridinger
Keyword(s):  
Perspective Taking ◽  
Prisoner's Dilemma ◽  
Prisoner’S Dilemma ◽  
Theoretical Models ◽  
Empathic Concern ◽  
Experimental Results ◽  
Prisoner’S Dilemma Game ◽  
Psychometric Measures ◽  
Prisoner's Dilemma Game ◽  
First Mover

This paper investigates the importance of concerns about intentions and outcomes in a sequential prisoner’s dilemma game with nature. In the game, there is a chance that the first mover’s choice is reversed. This allows the separation of intended actions from the resulting outcomes. Equilibrium predictions from theoretical models of fairness are tested experimentally by varying the chance the first mover’s choice is reversed and whether the second mover observes the first mover’s choice. The results show that second mover cooperation is higher when the first mover has little control over their choice and when the second mover is not told what the first mover chose. While subject behavior is consistent with concerns for both intentions and outcomes, the results indicate that these concerns work in ways not predicted by current theoretical models. In addition, I find that psychometric measures of empathic concern and perspective taking are correlated with second mover cooperation and provide potential explanations for the experimental results.

scholarly journals Sleep Disturbance from Road Traffic, Railways, Airplanes and from Total Environmental Noise Levels in Montreal

2016 ◽  
Vol 13 (8) ◽  
pp. 809 ◽  
Author(s):  
Stéphane Perron ◽  
Céline Plante ◽  
Martina Ragettli ◽  
David Kaiser ◽  
Sophie Goudreau ◽  
...  
Keyword(s):  
Sleep Disturbance ◽  
Road Traffic ◽  
Environmental Noise ◽  
Noise Levels

Design of Magnetic Levitated Thrust Bearing Experiment Table

2011 ◽  
Vol 199-200 ◽  
pp. 597-602
Author(s):  
Shou Fa Liu ◽  
Zhang Jie Shi ◽  
Chun Feng Li
Keyword(s):  
Thrust Bearing ◽  
Deformation Measurement ◽  
Experimental Results ◽  
Electromagnetic Parameters ◽  
Ansys Simulation ◽  
Overall Design ◽  
Experimental Parameters ◽  
Structural Dimensions ◽  
Simulation Results

In this paper, the overall design of magnetic levitated thrust bearing experiment table was completed, of which the main experimental parameters those are electromagnetic parameters and structural dimensions were determined, in addition, the joint debugging and deformation measurement are performed. Analysis results showed that theoretical value, ANSYS simulation results and experimental results were similar, which said that it is feasible to perform stiffness check of the thrust collar on the experiment table.

scholarly journals MEMS-Based Electrochemical Seismometer with a Sensing Unit Integrating Four Electrodes

Micromachines ◽  
2021 ◽  
Vol 12 (6) ◽  
pp. 699
Author(s):  
Wenjie Qi ◽  
Chao Xu ◽  
Bowen Liu ◽  
Xu She ◽  
Tian Liang ◽  
...  
Keyword(s):  
Ground Motions ◽  
Experimental Results ◽  
Glass Layer ◽  
Noise Levels ◽  
Stabilization Time ◽  
New Process ◽  
Accuracy Parameter ◽  
Peak Sensitivity ◽  
High Consistency ◽  
Four Electrodes

This paper presents a new process to fabricate a sensing unit of electrochemical seismometers using only one silicon–glass–silicon bonded wafer. By integrating four electrodes on one silicon–glass–silicon bonded wafer, the consistency of the developed sensing unit was greatly improved, benefiting from the high alignment accuracy. Parameter designs and simulations were carried out based on this sensing unit, which indicated that the sensitivities of the developed electrochemical seismometer decreased with the decrease in the number of flow holes in the sensing unit, and the initial stabilization time decreased gradually with the decrease in the thickness of the glass layer. Based on experimental results of four devices, the peak sensitivity was quantified as 5345.45 ± 43.78 V/(m/s) at 2 Hz, which proved high consistency of the fabricated electrochemical seismometer. In terms of the responses to random ground motions, high consistencies between the developed electrochemical seismometer and the commercial counterpart of CME6011 (R-sensors, Moscow, Russia) were found, where the developed electrochemical seismometer produced comparable noise levels to those of CME6011. These results validated the performance of the device and it may function as an effective tool for a variety of applications.

The Quantification of Internal Noise Levels and Wall Pressure Spectra in Industrial Gas Pipelines

1991 ◽  
Author(s):  
M. P. Norton ◽  
A. Pruiti
Keyword(s):  
Prediction Models ◽  
Transmission Loss ◽  
Pressure Fluctuations ◽  
Internal Noise ◽  
Wall Pressure ◽  
Gas Pipelines ◽  
Noise Levels ◽  
Empirical Prediction ◽  
Wall Pressure Fluctuations ◽  
Semi Empirical

Abstract This paper addresses the issue of quantifying the internal noise levels/wall pressure fluctuations in industrial gas pipelines. This quantification of internal noise levels/wall pressure fluctuations allows for external noise radiation from pipelines to be specified in absolute levels via appropriate noise prediction models. Semi-empirical prediction models based upon (i) estimated vibration levels and radiation ratios, (ii) semi-empirical transmission loss models, and (iii) statistical energy analysis models have already been reported on by Norton and Pruiti 1,3 and are not reported on here.

Sign in / Sign up

Export Citation Format

Share Document