scholarly journals THE ISOTHERMIC ADSORPTION OF Pb(II), Cu(II) AND Cd(II) IONS ON Nannochloropsis sp ENCAPSULATED BY SILICA AQUAGEL

2010 ◽  
Vol 9 (1) ◽  
pp. 1-4
Author(s):  
Zipora Sembiring ◽  
Buhani Buhani ◽  
Suharso Suharso ◽  
Sumadi Sumadi
Keyword(s):  
Metal Ions ◽  
Adsorption Energy ◽  
Contact Time ◽  
Adsorption Process ◽  
Chemical Interaction ◽  
Absorption Spectrometry ◽  
Batch Method ◽  
Adsorption Capacities ◽  
Metal Contents ◽  
Series Of Experiments

The research on the adsorption process of metal ions of Pb(II), Cu(II) and Cd(II) on Nannochloropsis sp biomass encapsulated by silica aquagel has successfully been done. The research was carried out in a series of experiments using batch method to obtain the capacity and adsorption energy values of the metal ions. The analysis of metal contents was done by atomic absorption spectrometry. The results showed that the adsorption capacities of Pb(II), Cu(II) and Cd(II) ions were 322.58; 0.033 and 0.0322 mmole/g adsorbent, respectively, at 27 °C and contact time of 30 min. The interaction between Pb(II), Cu(II) and Cd(II) ions and Nannochloropsis sp biomass encapsulated by silica aquagel is chemical interaction with the adsorption energy in the range of 20.55 - 22.70 kJ/mole.   Keywords: adsorption, Nannochlorosis sp, encapsulated, silica aquagel

scholarly journals The Utilization of Poly-37,40-diallyl-38,39,41,42,-tetrahydroxycalix[6]arenes Compound as Adsorbent for Heavy Metal Cations Cd(II), Cr(III) and Cu(II)

2020 ◽  
Vol 5 (2) ◽  
pp. 94
Author(s):  
Susy Yunita Prabawati ◽  
Jumina Jumina ◽  
Sri Juari Santosa ◽  
Mustofa Mustofa
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Adsorption Kinetics ◽  
Contact Time ◽  
Metal Ion ◽  
Adsorption Process ◽  
Metal Cations ◽  
Batch Method ◽  
Heavy Metal Cations ◽  
Adsorption Capacities

This research aims to examine the capability of poly-37,40-diallyl-38,39,41,42,-tetrahydroxy-calix[6]arenes as adsorbent for heavy metal cations such as Cd(II), Cr(III) and Cu(II). The adsorption process was carried out by batch method in the variation of acidity (pH), contact time and initial concentration of metal ions. The adsorption kinetics and adsorption isotherms were also studied. The results of this research showed that the amount of adsorbed metal increased with the increasing of the pH of metal solution. The amount of metal ions Cd(II) and Cr(III) adsorbed was optimum at pH 5, while for metal ion Cu(II) was optimum at pH 4. The optimum contact time for Cd(II), Cr(III) and Cu(II) was 60; 30; and 180 minutes, respectively. The study of adsorption kinetics showed that the adsorption of Cd (II), Cr (III) and Cu (II) metal ions using this adsorbent followed kinetics model of Ho. Isothermal studies showed that the adsorption of the three metal ions tends to follow the Langmuir isotherm. The adsorption capacities of Cd (II), Cr (III) and Cu (II) metal ions with poly-37,40-diallyl-38,39,41,42,-tetrahydroxycalix[6]arenes were 7.06; 14.72 and 38.45 µmol/g, respectively.  

scholarly journals STUDY ON THE ADSORPTION PROPERTIES OF NOVEL CALIX[6]ARENE POLYMERS FOR HEAVY METAL CATIONS

2012 ◽  
Vol 12 (1) ◽  
pp. 28-34 ◽  
Author(s):  
Susy Yunita Prabawati ◽  
Jumina Jumina ◽  
Sri Juari Santosa ◽  
Mustofa Mustofa ◽  
Keisuke Ohto
Keyword(s):  
Heavy Metal ◽  
Metal Ions ◽  
Adsorption Kinetics ◽  
Contact Time ◽  
Adsorption Process ◽  
Metal Cations ◽  
Kinetics Model ◽  
Batch Method ◽  
Heavy Metal Cations ◽  
Kinetics Of

A research has been conducted to investigate the capability of a series of novel calix[6]arenes-based polymers: poly-monoallyloxycalix[6]arene (2a), poly-monoallyloxypenta-estercalix[6]arene (2b) and poly-monoallyloxypenta-acidcalix[6]arene (2c) for trapping of heavy metal cations such as Cd(II), Cu(II) and Cr(III). The existence of active hydroxy group (-OH) and with a tunnel-like structure of the polymers, caused the polymers can be used as adsorbents for heavy metals. The adsorption process was carried out in batch method in the variation of acidity (pH), contact time and initial concentration of metal ions. The results showed that the amount of adsorbed metal increased with the increasing of the pH of metal solution. For these three polymers, the amount of metal ions Cd(II), Cu(II) and Cr(III) adsorbed was optimum at pH 7, 6 and 5 respectively. The optimum contact time for Cd(II) and Cu(II) was 120 min, while that for Cr(III) was 60 min. Study of the adsorption kinetics showed that the adsorption of Cd(II), Cu(II) and Cr(III) using polymer 2a followed kinetics model of Ho. For adsorbent 2b and 2c, the adsorption kinetics of Cd(II) and Cr(III) also followed kinetics model of Ho while for the Cu(II) followed Lagergren kinetic models. Isothermal studies showed that the adsorption of metal ions on all adsorbents tend to follow the Langmuir isotherm. The adsorption energies of the three adsorbents were higher than 23 kJ/mole and polymer 2c has the largest adsorption capacity for Cr(III).

scholarly journals Adsorption Study for Trifluralin on Iraqi ? –Alumina

2012 ◽  
Vol 9 (1) ◽  
pp. 153-159 ◽  
Author(s):  
Baghdad Science Journal
Keyword(s):  
Adsorption Isotherm ◽  
Aqueous Solutions ◽  
Contact Time ◽  
Adsorption Process ◽  
Kinetic Equations ◽  
Adsorption Study ◽  
Adsorption Capacities ◽  
Experimental Parameters ◽  
Freundlich Adsorption Isotherm ◽  
Equilibrium Adsorption Isotherm

Equilibrium adsorption isotherm for the removal of trifluralin from aqueous solutions using ? –alumina clay has been studied. The result shows that the isotherms were S3 according Giels classification. The effects of various experimental parameters such as contact time, adsorbent dosage, effect of pH and temperature of trifluralin on the adsorption capacities have been investigated. The adsorption isotherms were obtained by obeying freundlich adsorption isotherm with (R2 = 0.91249-0.8149). The thermodynamic parameters have been calculated by using the adsorption process at five different temperature, the values of ?H, ?G and ?S were (_1.0625) kj. mol-1, (7.628 - 7.831) kj.mol-1 and (_2.7966 - _2.9162) kg. k-1. mol-1 respectively. The kinetic study of adsorption process has been studied depending on three kinetic equations: 1- Allergen equation 2- Morris –weber eguation 3- Reichenberg eguation. In general, the result shows the isotherm were on ?- alumina according to Giels classification.? –alumina and thermodynamic

scholarly journals BIOSORPTION OF METAL IONS Pb(II), Cu(II), AND Cd(II) ON Sargassum duplicatum IMMOBILIZED SILICA GEL MATRIX

2010 ◽  
Vol 6 (3) ◽  
pp. 245-250 ◽  
Author(s):  
Buhani Buhani ◽  
Suharso Suharso ◽  
Zipora Sembiring
Keyword(s):  
Metal Ions ◽  
Silica Gel ◽  
Functional Group ◽  
Adsorption Process ◽  
Liquid Waste ◽  
Batch Method ◽  
Algae Biomass ◽  
Adsorbent Surface ◽  
Physical And Chemical ◽  
Matrix Series

Sargassum duplicatum algae biomass is biological material which has a potency to be used as a biosorbent adsorb metal ions from industrial liquid waste, because it has effective functional group as a ligand. However, the ability of the algae biomass in adsorbing of heavy metal ions has some problem such as; tiny size, low density, and easy to be degradated by other microorganism. In addition, algae biomass can not be used directly in adsorption column for its application as the biosorbent. In order to improve physical and chemical prpperties of algae biomass, it needs to be immobilized on silica gel matrix. Series of experiment have been done, morphology analysis of adsorbent surface was performed by using Scanning Electron Microscopy (SEM) and adsorption process to examine the effectiveness of algae biomass immobilized in adsorbing Pb(II), Cu(II), and Cd(II) was performed using batch method at 27 °C. Concentration of metal was determined by using Atomic Absorption Spectrophotometer (AAS) and identification of functional group was conducted using Spectrophotometer Infrared (IR). Data obtained showed that interacting among metal ions with algae biomass is optimum at a range of 60 minutes. Adsorption energies of metal ions resulted from the interaction of metal ions with the functional group of -C=O group from carboxyl and amide on algae biomass and -Si-OH group from silica were at a range of 21.09-25.05 kJ/mole.   Keywords: biosorption, silica gel, Sargassum duplicatum, immobilization

scholarly journals Removal of lead from aqueous solutions by low cost and waste biosorbents (lemon, bean and artichoke shells)

2020 ◽  
Vol 81 (1) ◽  
pp. 159-169
Author(s):  
Feyza Ergüvenerler ◽  
Şerif Targan ◽  
Vedia Nüket Tirtom
Keyword(s):  
Contact Time ◽  
Adsorption Process ◽  
Low Cost ◽  
Standard Free Energy ◽  
Freundlich Isotherm ◽  
Standard Entropy ◽  
X Ray ◽  
Adsorption Capacities ◽  
Influence Of Ph ◽  
Scanning Electron

Abstract Simple, fast, effective, low cost and waste biosorbents, lemon, bean and artichoke shells, were used to remove lead (II) ions from aqueous solution. The influence of pH, contact time, temperature and lead (II) concentration of the removal process was investigated. The sufficient contact time was deemed 10 minutes for bean and artichoke shells and 60 minutes for lemon shells for Pb(II) ions. The thermodynamic parameters, such as standard free energy (ΔG), standard enthalpy (ΔH), and standard entropy (ΔS) of the adsorption process were calculated as −5.6786, −5.5758, −3.1488 kJmol−1 for ΔG, −7.2791, −20.285, −9.5561 kJ mol−1 for ΔH, −0.00545, −0.05017, −0.02185 kJ mol−1 K−1 for ΔS, respectively, for lemon, artichoke and bean shells. Maximum adsorption capacities of lead (II) were observed as 61.30 mg g−1, 88.5 mg g−1 and 62.81 mg g−1, respectively, for lemon, bean and artichoke shells according to the Freundlich isotherm model at 20 °C. Scanning electron microscope (SEM) and energy-dispersive X-ray detector (EDX) were used to characterize the surface morphology of the adsorbents. Consequently, Pb(II) removal using lemon, bean and artichoke shells would be an effective method for the economic treatment of wastewater.

Extraction of Heavy Metals from Aqueous Medium by Husk Biomass: Adsorption Isotherm, Kinetic and Thermodynamic study

2019 ◽  
Vol 233 (2) ◽  
pp. 201-223 ◽  
Author(s):  
Khalida Naseem ◽  
Rahila Huma ◽  
Aiman Shahbaz ◽  
Jawaria Jamal ◽  
Muhammad Zia Ur Rehman ◽  
...  
Keyword(s):  
Metal Ions ◽  
Aqueous Medium ◽  
Contact Time ◽  
Metal Ion ◽  
Adsorption Process ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Adsorbent Dosage ◽  
Adsorption Sites ◽  
Order Kinetic Model

Abstract This study describes the adsorption of Cu (II), Co (II) and Ni (II) ions from wastewater on Vigna radiata husk biomass. The ability of adsorbent to capture the metal ions has been found to be in the order of Ni (II)>Co (II) and Cu (II) depending upon the size and nature of metal ions to be adsorbed. It has been observed that percentage removal of Cu (II), Co (II) and Ni (II) ions increases with increase of adsorbent dosage, contact time and pH of the medium but up to a certain extent. Maximum adsorption capacity (qmax) for Cu (II), Co (II) and Ni (II) ions has been found to be 11.05, 15.04 and 19.88 mg/g, respectively, under optimum conditions of adsorbent dosage, contact time and pH of the medium. Langmuir model best fits the adsorption process with R2 value approaches to unity for all metal ions as compared to other models because adsorption sites are seemed to be equivalent and only monolayer adsorption may occur as a result of binding of metal ion with a functional moiety of adsorbent. Pseudo second order kinetic model best interprets the adsorption process of Cu (II), Co (II) and Ni (II) ions. Thermodynamic parameters such as negative value of Gibbs energy (∆G°) gives information about feasibility and spontaneity of the process. Adsorption process was found to be endothermic for Cu (II) ions while exothermic for Co (II) and Ni (II) ions as signified by the value of enthalpy change (∆H°). Husk biomass was recycled three times for removal of Ni (II) from aqueous medium to investigate its recoverability and reusability. Moreover V. radiata husk biomass has a potential to extract Cu (II) and Ni (II) from electroplating wastewater to overcome the industrial waste water pollution.

Adsorption of Copper Ions from Wastewater by Carboxymethylcellulose Sulfate

2011 ◽  
Vol 393-395 ◽  
pp. 1098-1101 ◽  
Author(s):  
Yan Yu ◽  
Feng Yuan Huang
Keyword(s):  
Contact Time ◽  
Copper Concentration ◽  
Adsorption Process ◽  
Ph Value ◽  
Copper Ions ◽  
Adsorption Capacities ◽  
Monolayer Adsorption ◽  
Optimum Ph ◽  
Equilibrium Data ◽  
Langmuir Isotherm Model

In the present paper, the ability of carboxymethylcellulose sulfate (CMC-S) for Cu(II) removal was studied. The influence of factors, such as the pH value, the initial copper concentrations, and the contact time, were investigated in detail. Atomic absorption spectrophotometer was applied to determined the concentration of Cu(II). The results showed that the adsorption process was strongly dependent on the pH value and the initial copper concentration. The optimum pH value was in the range of 6-7. The theoretical adsorption capacities for Cu(II) was 127.7 mg/g. The equilibrium data was well fitted to the Langmuir isotherm model at 25°C, which can be explained as a monolayer adsorption.

scholarly journals Biosorpsi Ion Logam Tembaga (Cu2+) Pada Biosorben Rumput Laut Coklat (Padina australis)

2018 ◽  
Vol 6 (1) ◽  
pp. 26-37
Author(s):  
Catherina M. Bijang ◽  
Jolantje Latupeirissa ◽  
Marike Ratuhanrasa
Keyword(s):  
Moisture Content ◽  
Metal Ions ◽  
Atomic Absorption ◽  
Contact Time ◽  
Brown Seaweed ◽  
Ash Content ◽  
Atomic Absorption Spectrophotometer ◽  
Batch Method ◽  
Optimum Ph ◽  
Determine Moisture Content

The research on the biosorption of Cu2+ metal ions in brown seaweed biosorbent (Padina australis) has been done. This study aims to determine moisture content, ash content, biomass content, pH and optimum contact time of Cu2+  metal ions absorption pH and optimum contact time of Cu2+  metal ions absorption. The method used is batch method. The adsorption result of Cu2+ metal ions was analyzed  by  using  atomic  absorption  spectrophotometer  (AAS).  The  results showed that the optimum pH was 7 with 99.8308 % absorption ability of biosorbent and the optimum contact time was 5 hours with 99.5570 % biosorbent absorbency.

scholarly journals Preparation of hydrogel reinforced with bentonite by gamma irradiation for metal absorption

2021 ◽  
Vol 10 (4) ◽  
pp. 48-55
Author(s):  
Tran To Uyen ◽  
Trinh Thi Tu Anh ◽  
Tamikazu Kume ◽  
Cao Dong Vu ◽  
Nguyen Minh Hiep ◽  
...  
Keyword(s):  
Gamma Irradiation ◽  
Adsorption Process ◽  
Absorption Spectrometry ◽  
Order Model ◽  
Adsorption Capacities ◽  
Dose Concentration ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Aas Method ◽  
Irradiation Technology

A natural-based sodium carboxymethyl cellulose (CMC) hydrogel reinforced with bentonite was prepared by using gamma irradiation technology. This is a novel hydrogel that uses natural polymer to absorb metal ions in wastewater. The influence of dose, concentration of CMC and bentonite on the sorption of hydrogels was investigated by atomic absorption spectrometry (AAS) method. According to the Langmuir isotherm model, the maximum adsorption capacities of CMC/bentonite hydrogel for Cu2+ and Pb2+ were 181.82 mg/g and 204.08 mg/g at room temperature, respectively. The pseudo-second-order model which describes the adsorption process of Cu2+ and Pb2+ was also studied

scholarly journals Biosorption of Lead and Cadmium Ions on the Green Parts of Daucus Carota

2020 ◽  
Vol 2 (1) ◽  
Author(s):  
Martin MUCHA
Keyword(s):  
Daucus Carota ◽  
Contact Time ◽  
Adsorption Process ◽  
Adsorption Equilibrium ◽  
Infrared Spectrometry ◽  
Adsorptive Removal ◽  
Ph Values ◽  
Lead And Cadmium ◽  
Adsorption Capacities ◽  
Stems And Leaves

This study deals with utilization of milled stems and leaves of carrot (Daucus carota) for the adsorptive removal of Pb(II) and Cd(II)from the aqueous solution. Carrot was bought in the local grocery, it was dried at the laboratory temperature and milled. Preparedmaterial was analysed by the infrared spectrometry which confirms good structural homogeneity of the sample. Kinetic measurementswere performed for estimation of adsorption equilibrium time. Equilibrium of Pb(II) adsorption was established after 6 hours of contact time, equilibrium of Cd(II) adsorption was established after 24 hours of contact time. The isotherms’ measurements were realizedwith the contact time 24 hours for the estimation of adsorption capacities of the studied sorbent. Adsorption capacities were around47 mg/g for Cd(II) and 154 mg/g for Pb(II). Changes of pH values of the sorption solutions were negligible but some amount of Ca(II),Mg(II), K(I) and Na(I) ions was released to the solution during adsorption process. Daucus carota stems and leaves exhibit good sorption capacities and they could be utilized for adsorptive removal of Pb(II) and Cd(II) ions from the aqueous solutions.

Sign in / Sign up

Export Citation Format

Share Document