scholarly journals Hydrogel Based on Crosslinked Methylcellulose Prepared by Electron Beam Irradiation for Wound Dressing Application

2014 ◽  
Vol 14 (3) ◽  
pp. 262-268 ◽  
Author(s):  
Ambyah Suliwarno
Keyword(s):  
Molecular Weight ◽  
Tensile Strength ◽  
Electron Beam ◽  
Wound Dressing ◽  
Irradiation Dose ◽  
Electron Beam Irradiation ◽  
Dose Range ◽  
Swelling Ratio ◽  
Beam Irradiation ◽  
Gel Fraction

The aim of this research is to explore the possibility of methylcellulose polymer to be used as wound dressing material prepared using electron beam technique. The methylcellulose paste solution with various of molecular weight (SM-4, SM-100, SM-400, SM-4000 and SM-8000) at different concentration (15-30% w/v) were irradiated by using electron beam on the dose range of 10 kGy up to 40 kGy. Gel fraction and swelling ratio of hydrogels were determined gravimetrically. Tensile strength and elasticity of hydrogels were measured using a universal testing machine. It was found that with the increasing of irradiation dose from 10 up to 40 kGy, gel fraction and tensile strength were increased for all of hydrogels with various of molecular weight. On contrary, the swelling ratio of hydrogels decreased with increasing of irradiation dose. The optimum hydrogels elasticity were obtained from methylcellulose solution with the concentration range of 15-20% with irradiation dose of 20 kGy and showed excellent performance. The hydrogels based on methylcellulose prepared by electron beam irradiation can be considered for wound dressing material.

Influence of electron beam irradiation on the mechanical properties of pbat/pla polymeric blend / Influência da irradiação por feixe de electrões nas propriedades mecânicas da mistura polimérica pbat/pla

2021 ◽  
Vol 7 (8) ◽  
pp. 79528-79537
Author(s):  
Pedro Marcio Munhoz ◽  
Fernando Codelo Nascimento ◽  
Leonardo Gondim de Andrade e Silva ◽  
Julio Harada ◽  
Wilson Aparecido Parejo Calvo
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Electron Beam ◽  
Electron Beam Irradiation ◽  
Impact Resistance ◽  
Poly Lactic Acid ◽  
Beam Irradiation ◽  
Radiation Process ◽  
Izod Impact ◽  
Polymeric Blend

The aim of this research was to evaluate the changes in the mechanical properties of poly(butylene adipate co-terephthalate)/poly(lactic acid) (PBAT/PLA) polymeric blend after the radiation process at different radiation doses. The irradiation was performed in an electron beam accelerator, with 1.5 MeV of energy and 25 mA electric current. The samples were irradiated with doses of 5, 10, 15, 25, 50, 65 and 80 kGy. Both irradiated and non-irradiated samples were characterized by Izod pendulum impact resistance and tensile strength at rupture. The results showed an increase of 44% in relation to Izod impact resistance at a dose of 65 kGy. However, the module of elasticity decreased 56% and tensile strength at rupture decreased 55% at the same radiation dose. In relation to elongation, significant alterations caused by electron beam irradiation was not observed. Therefore, it can be concluded that irradiated blends could be used to make environmentally friendly products, which could absorb impact energy. 

scholarly journals Radiation Processing and Characterization of Some Ethylene-propylene-diene Terpolymer/Butyl (Halobutyl) Rubber/Nanosilica Composites

Polymers ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2431
Author(s):  
Elena Manaila ◽  
Anton Airinei ◽  
Maria Daniela Stelescu ◽  
Maria Sonmez ◽  
Laurentia Alexandrescu ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Electron Beam ◽  
Water Uptake ◽  
Irradiation Dose ◽  
Electron Beam Irradiation ◽  
Rubber Matrix ◽  
Scanning Electron Microscopy Data ◽  
Beam Irradiation ◽  
Ethylene Propylene ◽  
Ethylene Propylene Diene Terpolymer

Composites based on ethylene–propylene–diene terpolymer (EPDM), butyl/halobutyl rubber and nanosilica were prepared by melt mixing and subjected to different doses of electron beam irradiation. The effect of irradiation dose on the mechanical properties, morphology, glass transition temperature, thermal stability and water uptake was investigated. The efficiency of the crosslinking by electron beam irradiation was analyzed by Charlesby–Pinner parameter evaluation and crosslink density measurements. The scanning electron microscopy data showed a good dispersion of nanosilica in the rubber matrix. An improvement in hardness and 100% modulus was revealed by increasing irradiation dose up to 150 kGy. The interaction between polymer matrix and nanosilica was analyzed using the Kraus equation. Additionally, these results indicated that the mechanical properties, surface characteristics, and water uptake were dependent on crosslink characteristics.

scholarly journals Increased Tensile Strength of Carbon Nanotube Yarns and Sheets through Chemical Modification and Electron Beam Irradiation

2014 ◽  
Vol 6 (9) ◽  
pp. 6120-6126 ◽  
Author(s):  
Sandi G. Miller ◽  
Tiffany S. Williams ◽  
James S. Baker ◽  
Francisco Solá ◽  
Marisabel Lebron-Colon ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Electron Beam ◽  
Carbon Nanotube ◽  
Chemical Modification ◽  
Electron Beam Irradiation ◽  
Beam Irradiation ◽  
Carbon Nanotube Yarns

scholarly journals E-beam irradiation for the control of Phytophthora nicotianae var. nicotianae in stonewool cubes

Nukleonika ◽  
2015 ◽  
Vol 60 (3) ◽  
pp. 679-682 ◽  
Author(s):  
Magdalena Ptaszek ◽  
Leszek B. Orlikowski ◽  
Wojciech Migdał ◽  
Urszula Gryczka
Keyword(s):  
Electron Beam ◽  
Root Rot ◽  
Irradiation Dose ◽  
Electron Beam Irradiation ◽  
Potato Dextrose Agar ◽  
Phytophthora Nicotianae ◽  
Beam Irradiation ◽  
Pathogen Population ◽  
Stem Base ◽  
Tomato Seedlings

Abstract Effectiveness of electron beam irradiation was evaluated against Phytophthora nicotianae var. nicotianae, the causal agent of stem base and root rot of tomato. In laboratory trials, irradiation of 7-day-old Phytophthora cultures growing on potato-dextrose-agar (PDA) medium with 1 kGy resulted in the disintegration of the pathogen’s hyphae. Increasing the irradiation dose to 3 kGy caused decay of the hyphae. Irradiation of infested stonewool with 5 kGy caused decrease of the pathogen population about 5 times. Application of 20 kGy completely eliminated the pathogen from stonewool. Irradiation of substratum resulted in significant increase of tomato seedlings healthiness, especially when the dose 20 kGy was applied.

Effects of electron beam irradiation on structure and properties of ultra-high molecular weight polyethylene fiber

2017 ◽  
Vol 47 (6) ◽  
pp. 1357-1377 ◽  
Author(s):  
Dongliang Dai ◽  
Meiwu Shi
Keyword(s):  
Molecular Weight ◽  
Electron Beam ◽  
High Molecular Weight ◽  
Electron Beam Irradiation ◽  
Breaking Strength ◽  
Beam Irradiation ◽  
Elongation At Break ◽  
Gel Content ◽  
Ultra High Molecular Weight ◽  
Polyethylene Fibers

This study introduced trimethylolpropane trimethacrylate into ultra-high molecular weight polyethylene fibers through supercritical CO2 pretreatment before the fibers were irradiated under an electron beam. Significant differences, emerging in the ultra-high molecular weight polyethylene fibers’ gel content, mechanical properties, and creep property according to their different irradiation doses, were studied through one-way analysis of variance. Regression equations were established between the irradiation dose and the gel content, breaking strength, elongation at break, and creep rate by regression analysis. A reasonable irradiation dosage range was determined after a verification experiment and the impact trends were analyzed; additionally, the sensitized irradiation crosslinking mechanism of ultra-high molecular weight polyethylene fibers was preliminarily examined. Then the surface morphology, chemical structures, thermal properties, and crystal properties of treated ultra-high molecular weight polyethylene fibers were measured. The results showed that as the irradiation dose increased, the gel content first rose and then declined; the breaking strength decreased continuously; the elongation at break increased at first and then decreased; and the creep rate originally fell and then rose before finally declining slowly. Electron beam irradiation had a significant etching effect on the fibers’ surface, and both the melting point and crystallinity decreased slightly.

NBR-PANI.DBSA BLENDS: EFFECT OF ELECTRON BEAM IRRADIATION

2013 ◽  
Vol 86 (1) ◽  
pp. 68-85 ◽  
Author(s):  
K. C. Yong
Keyword(s):  
Tensile Strength ◽  
Electron Beam ◽  
Electrical Properties ◽  
Electron Beam Irradiation ◽  
Cross Linking ◽  
Density Level ◽  
Beam Irradiation ◽  
Cross Link ◽  
Electrically Conductive ◽  
Good Potential

ABSTRACT The electron beam irradiation technique was successfully used to cross-link poly(butadiene-co-acrylonitrile)-polyaniline dodecylbenzenesulfonate [NBR-PAni.DBSA] blends. Significant increase in cross-linking densities of all blends with doses of irradiation (up to 200 kGy) was observed, and a reasonably high cross-linking density level (in the order of 1030 m−3) also was achieved. All electron beam–irradiated NBR-PAni.DBSA blends exhibited good tensile properties (with tensile strength up to ∼20 MPa), with values that are comparable to those of similar blends cross-linked with either conventional sulfur or peroxide techniques. This kind of irradiation-induced cross-linking technique (at doses up to 200 kGy) also did not interrupt the blends' electrical properties after the blends were sufficiently stabilized for at least 24 h. The irradiated NBR-PAni.DBSA blends also possessed good electrical properties, that is, a single conductivity percolation threshold and high conductivities up to the order of 10−2 S.cm−1. All of these findings indicate a good potential for using the electron beam irradiation technique to prepare highly cross-linked, electrically conductive NBR-PAni.DBSA blends.

A study of roles of different valence of copper oxide interaction with electron beam irradiation in polyethylene composite

2015 ◽  
Vol 30 (7) ◽  
pp. 915-937
Author(s):  
Soo-Tueen Bee ◽  
Lee Tin Sin ◽  
CT Ratnam ◽  
Gin-Khuan Chua ◽  
AR Rahmat
Keyword(s):  
Tensile Strength ◽  
Electron Beam ◽  
Crystallite Size ◽  
Electron Beam Irradiation ◽  
Cross Linking ◽  
Beam Irradiation ◽  
Polyethylene Composite ◽  
Loading Level ◽  
Irradiation Dosage ◽  
Ldpe Composites

The aim of this research was to investigate the interaction of electron beam irradiation on the different valence of copper (I) and copper (II) oxides (Cu2O and CuO) added low-density polyethylene (LDPE) composites. The results showed the increasing of Cu2O loading level in replacing the CuO has significantly reduced the gel content (or degree of cross-linking networks) in LDPE matrix. This is due to the poorer effect of Cu2O in inducing the polymeric free radicals. Meanwhile, the application of low irradiation dosage (≤100 kGy) has significantly increased the crystallite size for crystallite peak (110) of all LDPE composites. However, further increment in irradiation dosages from 100 to 300 kGy has gradually reduced the crystallite size of deflection peak (110). The tensile strength of all LDPE composites was gradually decreased with increasing of Cu2O loading level due to agglomeration of Cu2O and CuO particles in LDPE matrix. In addition, the increasing of irradiation dosages on all Cu2O /CuO added LDPE composites has gradually increased the tensile strength by inducing the formation of the cross-linking networks in LDPE matrix. Nevertheless, the increasing of irradiation dosage has gradually decreased the elongation at break of all Cu2O /CuO added LDPE composites. This is due to the higher degree of cross-linking networks in LDPE matrix could restrict the mobility of LDPE macromolecular chains when subjected to straining stress.

Sign in / Sign up

Export Citation Format

Share Document