scholarly journals Synthesis of ZnO Nanoparticles by Precipitation Method with Their Antibacterial Effect

2018 ◽  
Vol 16 (2) ◽  
pp. 117 ◽  
Author(s):  
Muhammad Fajri Romadhan ◽  
Nurgaha Edhi Suyatma ◽  
Fahim Muchammad Taqi
Keyword(s):  
Antimicrobial Activity ◽  
Particle Size ◽  
Average Particle Size ◽  
Spherical Shape ◽  
Xrd Analysis ◽  
Zinc Nitrate ◽  
Sem Analysis ◽  
Precipitation Method ◽  
Average Particle ◽  
Zno Nps

The aim of this study was to synthesize and characterize Zinc oxide nanoparticles (ZnO-NPs) prepared by precipitation method. Zinc nitrate and sodium hydroxide was used as starting materials with biopolymer pectin as capping agent. ZnO-NPs were synthesized at three levels of temperatures (60, 80 and 100 °C) without or with calcinations (500 °C). Particle size analyzer (PSA) analysis results showed that the samples without calcination (T60, T80 and T100) having an average particle size respectively 105.13, 78.53, and 76.43 nm, whereas at the samples by calcination (T60C, T80C and T100C) each have average particle size of 88.73, 44.30 and 543.77 nm. The results showed that preparation of ZnO-NPs by using heating at 80 °C followed with calcinations at 500 °C (T80C) produced the smallest size. T80C samples further were analyzed using XRD, SEM and the antimicrobial activity compared with the ZnO-NPs commercials. XRD analysis confirmed that ZnO-NPs were successfully obtained and have form of pure nanostructure. SEM analysis showed that ZnO-NPs obtained has a spherical shape. Furthermore, this ZnO-NPs (T80C) has a better antimicrobial activity compared than commercial ZnO-NPs in market.

Preparation ZnO nanoparticles with Different Concentration by Laser Ablation in Liquid

2021 ◽  
Vol 39 (1B) ◽  
pp. 197-202
Author(s):  
Ghufran S. Jaber ◽  
Khawla S. Khashan ◽  
Maha J. Abbas
Keyword(s):  
Particle Size ◽  
Laser Ablation ◽  
Laser Pulse ◽  
Laser Energy ◽  
Average Particle Size ◽  
Spherical Shape ◽  
Pulse Number ◽  
Average Particle ◽  
Zno Nps ◽  
Laser Ablation In Liquid

The effects of varying laser pulse numbers on the fabricated of ZnONPs by pulsed laser ablation in deionized water of Zn-metal are investigated. The Nd: YAG laser at energy 600mJ prepared three samples by change the laser pulse number (100, 150, and 200). The results were collected and examined using an electron scanning microscope, XRD – diffraction, and transmission electron microscope. The result revealed the colloidal spherical shape and the homogeneous composition of the ZnO NPs. The nanoparticles resulted in different concentrations and sized distributions by changing the pulse number of a laser. The average particle size and the mass concentration of particle size increase with an increasing number of laser pulses by fixed the laser energy.

scholarly journals Synthesis of Pure Nano semiconductor Oxide ZnO with Different AgNO3 Concentrations

2017 ◽  
Vol 14 (2) ◽  
pp. 379-389
Author(s):  
Baghdad Science Journal
Keyword(s):  
Particle Size ◽  
Average Particle Size ◽  
Zinc Nitrate ◽  
Precipitation Method ◽  
Average Particle ◽  
X Ray Diffraction ◽  
Force Microscopy ◽  
Agno3 Solution ◽  
Atomic Force ◽  
Scanning Electron

Zinc oxide nanoparticles sample is prepared by the precipitation method. This method involves using zinc nitrate and urea in aqueous solution, then (AgNO3) Solution with different concentrations is added. The obtained precipitated compound is structurally characterized by X-ray diffraction (XRD), Scanning electron microscopy (SEM), Atomic force microscopy (AFM) and Fourier transform infrared spectroscopy (FTIR). The average particle size of nanoparticles is around 28nm in pure, the average particle size reaches 26nm with adding AgNO3 (0.05g in100ml =0.002 M) (0.1g in100ml=0.0058M), AgNO3 (0.2g in 100ml=0.01M) was 25nm. The FTIR result shows the existence of -CO, -CO2, -OH, and -NO2- groups in sample and oxides (ZnO, Ag2O).and used an atomic force microscope and microscope scanning electron to model the record.

scholarly journals Sintesis Nanopartikel Perak Menggunakan Ekstrak Daun Kluwak Pangium edule Reinw Sebagai Bioreduktor dan Uji Aktivitasnya Sebagai Antioksidan

2019 ◽  
Vol 10 (1) ◽  
Author(s):  
Indrawati Patabang ◽  
Syahruddin Kasim ◽  
Paulina Taba
Keyword(s):  
Antioxidant Activity ◽  
Particle Size ◽  
Silver Nanoparticles ◽  
Leaf Extract ◽  
Average Particle Size ◽  
Xrd Analysis ◽  
Average Particle ◽  
Result Show ◽  
Ic50 Values ◽  
Show Result

Silver nanoparticles have been synthesized using kluwak leaf extract (Pangium edule Reinw) as bioreductor and antioxidant activity assay. The nanoparticles formed were monitored by observing UV-Vis absorption and characterized by using FTIR, PSA, XRD and SEM instruments. The result of functional group characterization with FTIR show that the functional groups OH, C = O, C-O and CH2 act as Ag+ reducing agent. The size of silver nanoparticles was determined by using Particle Size Analyzer (PSA) and the result show average particle size distribution of 93.2 nm. Morphology of AgNp were observed by Scanning Electron Microscope (SEM) and X-Ray Difraction (XRD) analysis show result of 51,78 nm. The antioxidant activity was shown by in kluwak leaf extract and silver nanoparticles with IC50 values respectively 831,33 ppm dan 1493,09 ppm.

scholarly journals Preparation and characterization of domperidone nanoparticles for dissolution improvement

2018 ◽  
Vol 27 (1) ◽  
pp. 39-52
Author(s):  
Mohammed Sabar Al-lami ◽  
Malath H. Oudah ◽  
Firas A. Rahi
Keyword(s):  
Particle Size ◽  
Average Particle Size ◽  
In Vitro Release ◽  
Methyl Cellulose ◽  
Precipitation Method ◽  
Average Particle ◽  
Antisolvent Precipitation ◽  
Stirring Time

This study was carried out to prepare and characterize domperidone nanoparticles to enhance solubility and the release rate. Domperidone is practically insoluble in water and has low and an erratic bioavailability range from 13%-17%. The domperidone nanoparticles were prepared by solvent/antisolvent precipitation method at different polymer:drug ratios of 1:1 and 2:1 using different polymers and grades of poly vinyl pyrolidone, hydroxy propyl methyl cellulose and sodium carboxymethyl cellulose as stabilizers. The effect of polymer type, ratio of polymer:drug, solvent:antisolvent ratio, stirring rate and stirring time on the particle size, were investigated and found to have a significant (p? 0.05) effect on particle size. The best formula was obtained with lowest average particle size of 84.05. This formula was studied for compatibility by FTIR and DSC, surface morphology by FESEM and crystalline state by XRPD. Then domperidone nanoparticles were formulated into a simple capsule dosage form in order to study of the in vitro release of drug from nanoparticles in comparison raw drug and mixture of polymer:drug ratios of 2:1. The release of domperidone from best formula was highly improved with a significant (p? 0.05) increase.

scholarly journals Effect of the polymeric coating over Fe3O4 particles used for magnetic separation

2010 ◽  
Vol 8 (5) ◽  
pp. 1041-1046 ◽  
Author(s):  
Raúl Reza ◽  
Carlos Martínez Pérez ◽  
Claudia Rodríguez González ◽  
Humberto Romero ◽  
Perla García Casillas
Keyword(s):  
Particle Size ◽  
Magnetite Nanoparticles ◽  
Average Particle Size ◽  
Spherical Shape ◽  
Polymeric Coating ◽  
Average Particle ◽  
Synthesis Conditions ◽  
Aging Conditions ◽  
Magnetite Particles ◽  
Average Size

AbstractIn this work, the synthesis of magnetite nanoparticles by two variant chemical coprecipitation methods that involve reflux and aging conditions was investigated. The influence of the synthesis conditions on particle size, morphology, magnetic properties and protein adsorption were studied. The synthesized magnetite nanoparticles showed a spherical shape with an average particle size directly influenced by the synthesis technique. Particles of average size 27 nm and 200 nm were obtained. When the coprecipitation method was used without reflux and aging, the smallest particles were obtained. Magnetite nanoparticles obtained from both methods exhibited a superparamagnetic behavior and their saturation magnetization was particle size dependent. Values of 67 and 78 emu g−1 were obtained for the 27 nm and 200 nm magnetite particles, respectively. The nanoparticles were coated with silica, aminosilane, and silica-aminosilane shell. The influence of the coating on protein absorption was studied using Bovine Serum Albumin (BSA) protein.

Fe3O4 Magnetic Preparation by Bauxite Ore Washing Fine Mud

2014 ◽  
Vol 1010-1012 ◽  
pp. 961-965
Author(s):  
Jian Qiang Xiao ◽  
Guo Wei He ◽  
Yan Jin Hu
Keyword(s):  
Particle Size ◽  
Aging Time ◽  
Average Particle Size ◽  
Xrd Analysis ◽  
Test Methods ◽  
Raw Material ◽  
Molar Ratio ◽  
Average Particle ◽  
Experimental Conditions ◽  
Particle Size Analyzer

Bauxite waste sludge as a raw material, the use of reverse chemical coprecipitation synthesize Fe3O4. Researching temperature, precipitation concentration, aging time and Fe2+/Fe3+ molar ratio effect on the particle size, morphology. Optimal experimental conditions: temperature 70 °C, the precipitant NaOH mass ratio of 10%, aging time 3h, Fe2+/Fe3+ molar ratio of 2:3. Test methods using a laser particle size analyzer, XRD analysis of the products were characterized, the product is Fe3O4, the average particle size of 0.11mm.

scholarly journals Investigation of structural and optical properties of biosynthesized Zincite (ZnO) nanoparticles (NPs) via an aqueous extract of Rosmarinus officinalis (rosemary) leaves

MRS Advances ◽  
2020 ◽  
Vol 5 (45) ◽  
pp. 2349-2358 ◽  
Author(s):  
S. K. Noukelag ◽  
H.E.A. Mohamed ◽  
B. Moussa ◽  
L.C. Razanamahandry ◽  
S.K.O. Ntwampe ◽  
...  
Keyword(s):  
Aqueous Extract ◽  
Surface Defects ◽  
High Surface ◽  
Average Particle Size ◽  
Zinc Nitrate ◽  
Attenuated Total Reflection ◽  
Average Particle ◽  
Nitrate Hexahydrate ◽  
Zno Nps ◽  
X Ray

AbstractBiosynthesized Zincite nanoparticles have been successfully demonstrated by a completely green process mediated aqueous extract of rosemary leaves acting as both reducing and stabilizing agents and zinc nitrate hexahydrate as the precursor. The synthesis was free of solvents and surfactants to adhere to green chemistry principles and the impartation of environmental benignity. To achieve our objective, structural and optical investigations of ZnO annealed at 500°C for 2hrs were carried-out using complementary techniques. High resolution transmission electron microscopy (HRTEM) revealed the self-assembled, highly agglomerated quasi-hexagonal shaped NPs and the average particle size was found to peak at 15.62 ± 0.22 nm. Selected area electron diffraction (SAED) and X-ray diffraction (XRD) exhibited several diffraction rings with clear diffraction spots confirming their polycrystallinity and the purity of ZnO NPs with a wurtzite structure. Furthermore, the energy dispersive X-ray spectroscopy (EDS) substantiated the presence of Zn and O in the sample and attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR) illustrated the Zn-O chemical bonds. From UV-Vis-NIR, the optical band gap was amounted to 3.2 eV and photoluminescence (PL) emission spectrum to 2.9eV with high surface defects and oxygen vacancies. Through these results, the use of rosemary leaves extract is hereby shown to be a cost-effective and environmentally friendly alternative to synthesize Zincite nanoparticles (ZnO NPs).

Morphology-Controlled CaCO3 Nanostructures by Modified Co-Precipitation in Pulsed Mode

2015 ◽  
Vol 752-753 ◽  
pp. 148-153
Author(s):  
M.M. Nassar ◽  
Taha Ebrahiem Farrag ◽  
M.S. Mahmoud ◽  
Sayed Abdelmonem
Keyword(s):  
Particle Size ◽  
Calcium Carbonate ◽  
Rotation Speed ◽  
Average Particle Size ◽  
Calcium Nitrate ◽  
Precipitation Method ◽  
Average Particle ◽  
X Ray ◽  
Co Precipitation ◽  
Pulsed Mixing

Calcium carbonate nanoparticles and nanorods were synthesized by precipitation from saturated sodium carbonate and calcium nitrate aqueous solutions through co precipitation method. A new rout of synthesis was done by both using pulsed mixing method and controlling the addition of calcium nitrate. The effect of the agitation speed, and the temperature on particle size and morphology were investigated. Particles were characterized using X-ray Microanalysis, X-ray analysis (XRD) and scanning electron microscopy (SEM). The results indicated that increasing the mixer rotation speed from 3425 to 15900 (rpm) decreases the average particle size to 64±7 nm. A rapid nucleation then aggregation induced by excessive shear force phenomena could explain this observation. Moreover, by increasing the reaction temperature, the products were converted from nanoparticle to nanorods. The maximum attainable aspect ratio was 6.23 at temperature of 75°C and rotation speed of 3425. Generally, temperature raise promoted a significant homoepitaxial growth in one direction toward the formation of calcite nanorods. Overall, this study can open new avenues to control the morphology of the calcium carbonate nanostructures.

Preparation and Particle Size Characterization of Cu Nanoparticles Prepared by Anodic Arc Plasma

2010 ◽  
Vol 92 ◽  
pp. 163-169
Author(s):  
Hong Xia Qiao ◽  
Zhi Qiang Wei ◽  
Ming Ru Zhou ◽  
Zhong Mao He
Keyword(s):  
Crystal Structure ◽  
Particle Size ◽  
Specific Surface ◽  
Size Distribution ◽  
Surface Area ◽  
Specific Surface Area ◽  
Average Particle Size ◽  
Spherical Shape ◽  
Average Particle ◽  
Uniform Size

Copper nanoparticles were successfully prepared in large scales by means of anodic arc discharging plasma method in inert atmosphere. The particle size, specific surface area, crystal structure and morphology of the samples were characterized by X-ray diffraction (XRD), BET equation, transmission electron microscopy (TEM) and the corresponding selected area electron diffraction (SAED). The experiment results indicate that the crystal structure of the samples is fcc structure as same as that of the bulk materials. The specific surface area is is 11 m2/g, with the particle size distribution ranging from 30 to 90 nm, the average particle size about 67nm obtained from TEM and confirmed from XRD and BET results. The nanoparticles have uniform size, higher purity, narrow size distribution and spherical shape can be prepared by this convenient and effective method.

Evaluation of the Antimicrobial Activity of Citric Acid Functionalized Magnetite Nanoparticles

2020 ◽  
Vol EJMM29 (4) ◽  
pp. 143-149
Author(s):  
Ahmed M. El-Khawaga ◽  
Ayman A. Farrag ◽  
Ahmed I. El-Batal ◽  
Mohamed A. Elsayed
Keyword(s):  
Antimicrobial Activity ◽  
Citric Acid ◽  
Magnetite Nanoparticles ◽  
Pathogenic Bacteria ◽  
Average Particle Size ◽  
Maximum Activity ◽  
Precipitation Method ◽  
Average Particle ◽  
Effective Prevention ◽  
Fe3o4 Nps

Background: Antimicrobial resistance (AMR) has emerged as one of the principal public health problems of the 21st century that threatens the effective prevention and treatment of an ever-increasing range of infections caused by bacteria no longer susceptible to the common medicines used to treat them. Objectives: To development of Fe3O4 NPs with specific sizes and shapes Potential as a new antibacterial agent. Methodology: In this study magnetite nanoparticles (Fe3O4 NPs) were synthesized through an aqueous co-precipitation method and functionalized with citric acid for outstanding their antimicrobial potential. Fe3O4 NPs were characterized by XRD, TEM, SEM, EDX and FTIR to analyze crystallinity, average particle size, morphology and functional groups, respectively. Antimicrobial activity was investigated against pathogenic bacteria as zone of inhibition (ZOI) and minimum inhibitory concentration (MIC). Results: Antimicrobial results showed that CA- Fe3O4 NPs owns maximum activity against Staphylococcus aureus and E. coli by 18.0 and 15.0mm ZOI, respectively. Conclusion: It should be noted that (CA-Fe3O4) NPs are also active upon Gram-positive than Gram- negative bacteria. The synthesized (CA-Fe3O4) NPs are promising for potential applications as antimicrobial agent and in drug delivery fields.

Sign in / Sign up

Export Citation Format

Share Document