scholarly journals The Optimization of Ozonolysis Reaction For Synthesis of Biopolyol From Used Palm Cooking Oil

2014 ◽  
Vol 14 (1) ◽  
pp. 1
Author(s):  
Edy Purwanto ◽  
Lieke Riadi ◽  
Nathania Tamara I. ◽  
Mellisha Ika K.
Keyword(s):  
Reaction Time ◽  
Response Surface ◽  
Ozone Concentration ◽  
Molar Ratio ◽  
Optimal Operating ◽  
Optimal Operating Condition ◽  
Hydroxyl Value ◽  
Independent Variables ◽  
Cooking Oil ◽  
Used Cooking Oil

Biopolyol is a raw material for synthesis of polyurethanes which is used as thermoset and thermoplastic materials, adhesives, rigid or non-rigid foams and also for coating. The utilization of waste edible oil as feedstock for synthesis of biopolyol has attracted some researchers. However, there is little attention focused on the application of ozone technology for synthesis of biopolyol from used cooking oil through ozonolysis reaction. Response surface methodology was performed to determine the optimal operating condition in the synthesis of biopolyol using ozone and sorbitol as a hydroxyl group source. The influence of input variables such as temperature, reaction time, molar ratio of oil to sorbitol and ozone concentration on hydroxyl value quantified was studied. The optimal condition was determined by high amount of hydroxyl value resulted from response surface method which used the experimental data. The ozonolysis reaction was conducted in a batch reactor equipped with agitator, tube sparger, thermocouple, reflux condenser and potassium iodide trap. Central composite design with four independent variables and one response variable was performed to determine the influence of independent variables on output variable of hydroxyl value of biopolyol. The hydroxyl value of polyol is a quadratic function of molar ratio of oil to methanol and a linear function of reaction temperature. The optimal operating condition was achieved at a temperature of 25℃, a reaction time of 5 hours, molar ratio of used cooking oil to sorbitol is 1:7 and ozone concentration about 4.8%.Keywords: Ozonolysis; Biopolyol; Hydroxyl value; Used cooking oil; Palm oil

scholarly journals CHARACTERISTICS OF BIODIESEL FROM WASTE COOKING OIL USING PALM EMPTY ASH CATALYST

2016 ◽  
Vol 3 (1) ◽  
pp. 38-47
Author(s):  
Sukma Budi Ariyani ◽  
Asmawit ◽  
Hidayati
Keyword(s):  
Reaction Time ◽  
Cetane Number ◽  
Calorific Value ◽  
Waste Cooking Oil ◽  
Acid Number ◽  
Phosphorus Acid ◽  
Independent Variables ◽  
Empty Fruit Bunches ◽  
Cooking Oil ◽  
Used Cooking Oil

The purpose of this study was to know the effect of adding a catalyst ash of palm empty fruit bunches on the number and characteristics of biodiesel produced from used cooking oil. The independent variables studied are heavy ash of palm empty fruit bunches (8, 10 and 12 g), the mole ratio of methanol: oil (6: 1, 9: 1 and 12: 1) and reaction time (60, 90 and 120 minutes). The results obtained are highest biodiesel yield is obtained of 54.7 mg/Kg on a reaction time of 60 minutes, the mole ratio of methanol:oil at 12:1, catalyst ash 10 g per 75 mL of methanol at a temperature of 60oC and stirring speed 600 rpm. Characteristics of biodiesel were analyzed in the study include the density, kinematic viscosity, cetane number, flash point, the point of fog, carbon residue, distillation temperature 90% vol, phosphorus, acid number and calorific value.

scholarly journals Hybrid Response Surface Method-African Buffalo Optimization Technique for Ultrasonic Production of Biodiesel from Waste Cooking Oil using Li doped CaO Nanocatalyst

2020 ◽  
Vol 9 (5) ◽  
pp. 1938-1947
Keyword(s):  
Response Surface ◽  
Methyl Esters ◽  
Optimization Technique ◽  
Research Work ◽  
Waste Cooking Oil ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
African Buffalo ◽  
Cooking Oil ◽  
Used Cooking Oil

In the current era, there is an increasing emphasis on green fuels for a clean environment. Authors in this work have tried to devise an innovative method to optimize ultrasonic production of biodiesel from used cooking oil, using composite technique combining Response surface Methodology and African Buffalo optimization. In this research work, heterogeneous catalyst Lithium doped CaO has been obtained from a new natural source by high-temperature thermal decomposition of Musa Balbisiana root ash and tested its Conversion efficiency for conversion of waste cooking oil into methyl esters. It was observed that the catalyst is really effective for the production of biodiesel from even high Free Fatty Acid waste cooking oil. For optimization of production parameters authors have used ABO complemented with RSM to maximize the biodiesel production yield. The maximum biodiesel yield of 96.67% was achieved using ABO which is about 15% higher than provided by RSM which is 81.01%. The highest biodiesel yield of 96.67 % is obtained at 15:1 Molar Ratio with 3.5% catalyst wt. percent, 60 Degree C Temp. in 45 Minutes with an error of 2.5 % in yield prediction by ABO. The work may be utilized by industries and researchers to use ultrasonic reactors optimally to extract better biodiesel volume in very short time instead of presently used slow mechanical stirring tank reactors.

scholarly journals Biodiesel Synthesis from the Used Cooking Oil Using CaO Catalyst Derived from Waste Animal Bones

2021 ◽  
Vol 15 (4) ◽  
pp. 583-590
Author(s):  
Luqman Buchori ◽  
◽  
Didi Dwi Anggoro ◽  
Anwar Ma’ruf ◽  
◽  
...  
Keyword(s):  
Fatty Acids ◽  
Reaction Time ◽  
Operating Conditions ◽  
Molar Ratio ◽  
Optimum Operating ◽  
Catalyst Loading ◽  
Cooking Oil ◽  
Used Cooking Oil ◽  
Animal Bones ◽  
Biodiesel Synthesis

The synthesis of biodiesel from the used cooking oil with CaO catalyst from waste animal bones has been investigated. The content of free fatty acids (FFA) in the used cooking oil was reduced by adsorption using activated charcoal from a salak peel. Biodiesel synthesis was carried out via transesterification using CaO catalyst. The CaO catalyst was obtained from waste animal bones calcined in the Ney Vulcan furnace. The effect of calcination temperature was studied in the range of 873‒1273 K. The effect of catalyst loading was investigated by varying within the range of 1‒9 wt %. The methanol to oil molar ratio was investigated in the range from 6:1 to 18:1. The effect of the transesterification reaction time was studied with a time variation of 1‒5 h. The optimum operating conditions were determined. Under these conditions, the yield of biodiesel produced was 97.56 % with an ester content of 96.06 %. It was shown that the physicochemical properties of biodiesel produced meet the standards.

scholarly journals Two-Stage Biodiesel Synthesis from Used Cooking Oil with a High Acid Value via an Ultrasound-Assisted Method

Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3703
Author(s):  
Ming-Chien Hsiao ◽  
Wei-Ting Lin ◽  
Wei-Cheng Chiu ◽  
Shuhn-Shyurng Hou
Keyword(s):  
Acid Value ◽  
Molar Ratio ◽  
Optimal Conditions ◽  
Two Stage ◽  
Cooking Oil ◽  
High Acid ◽  
Used Cooking Oil ◽  
Biodiesel Synthesis ◽  
Stage Process ◽  
Ultrasound Assisted

In this study, ultrasound was used to accelerate two-stage (esterification–transesterification) catalytic synthesis of biodiesel from used cooking oil, which originally had a high acid value (4.35 mg KOH/g). In the first stage, acid-catalyzed esterification reaction conditions were developed with a 9:1 methanol/oil molar ratio, sulfuric acid dosage at 2 wt %, and a reaction temperature of 60 °C. Under ultrasound irradiation for 40 min, the acid value was effectively decreased from 4.35 to 1.67 mg KOH/g, which was decreased to a sufficient level (<2 mg KOH/g) to avoid the saponification problem for the subsequent transesterification reaction. In the following stage, base-catalyzed transesterification reactions were carried out with a 12:1 methanol/oil molar ratio, a sodium hydroxide dosage of 1 wt %, and a reaction temperature of 65 °C. Under ultrasound-assisted transesterification for 40 min, the conversion rate of biodiesel reached 97.05%, which met the requirement of EN 14214 standard, i.e., 96.5% minimum. In order to evaluate and explore the improvement of the ultrasound-assisted two-stage (esterification–transesterification) process in shortening the reaction time, additional two-stage biodiesel synthesis experiments using the traditional mechanical stirring method under the optimal conditions were further carried out in this study. It was found that, under the same optimal conditions, using the ultrasound-assisted two-stage process, the total reaction time was significantly reduced to only 80 min, which was much shorter than the total time required by the conventional method of 140 min. It is worth noting that compared with the traditional method without ultrasound, the intensification of the ultrasound-assisted two-stage process significantly shortened the total time from 140 min to 80 min, which is a reduction of 42.9%. It was concluded that the ultrasound-assisted two-stage (esterification–transesterification) catalytic process is an effective and time-saving method for synthesizing biodiesel from used cooking oil with a high acid value.

Optimization and statistical analysis of sono-Fenton treated wastewater of food industry using reactor by response surface method

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Vijay A. Juwar ◽  
Ajit P. Rathod
Keyword(s):  
Reaction Time ◽  
Response Surface ◽  
Food Industry ◽  
Batch Reactor ◽  
Oxygen Demand ◽  
Volume Ratio ◽  
Cod Removal ◽  
Treated Wastewater ◽  
Experimental Result ◽  
Molar Ratio

Abstract The present study deals with the treatment of complex waste (WW) treated for removal of chemical oxygen demand (COD) of the food industry by a sono-Fenton process using a batch reactor. The response surface methodology (RSM) was employed to investigate the five independent variables, such as reaction time, the molar ratio of H2O2/Fe2+, volume ratio of H2O2/WW, pH of waste, and ultrasonic density on COD removal. The experimental data was optimized. The optimization yields the conditions: Reaction time of 24 min, HP:Fe molar ratio of 2.8, HP:WW volume ratio of 1.9 ml/L, pH of 3.6 and an ultrasonic density of 1.8 W/L. The predicted value of COD was 91% and the experimental result was 90%. The composite desirability value (D) of the predicted percent of COD removal at the optimized level of variables was close to one (D = 0.991).

scholarly journals Optimization of Enzymatic Synthesis of Betulinic Acid Amide in Organic Solvent by Response Surface Methodology (RSM)

2019 ◽  
Vol 19 (4) ◽  
pp. 849
Author(s):  
Nurul Atikah Amin Yusof ◽  
Nursyamsyila Mat Hadzir ◽  
Siti Efliza Ashari ◽  
Nor Suhaila Mohamad Hanapi ◽  
Rossuriati Dol Hamid
Keyword(s):  
Response Surface Methodology ◽  
Reaction Time ◽  
Response Surface ◽  
Reaction Temperature ◽  
Betulinic Acid ◽  
Enzymatic Synthesis ◽  
Acid Amide ◽  
Molar Ratio ◽  
Percentage Yield ◽  
Substrate Molar Ratio

Optimization of the lipase catalyzed enzymatic synthesis of betulinic acid amide in the presence of immobilized lipase, Novozym 435 from Candida antartica as a biocatalyst was studied. Response surface methodology (RSM) and 5-level-4-factor central-composite rotatable design (CCRD) were employed to evaluate the effects of the synthesis parameters, such as reaction time (20–36 h), reaction temperature (37–45 °C), substrate molar ratio of betulinic acid to butylamine (1:1–1:3), and enzyme amounts (80–120 mg) on the percentage yield of betulinic acid amide by direct amidation reaction. The optimum conditions for synthesis were: reaction time of 28 h 33 min, reaction temperature of 42.92 °C, substrate molar ratio of 1:2.21, and enzyme amount of 97.77 mg. The percentage yield of actual experimental values obtained 65.09% which compared well with the maximum predicted value of 67.23%. The obtained amide was characterized by GC, GCMS and 13C NMR. Betulinic acid amide (BAA) showed a better cytotoxicity compared to betulinic acid as the concentration inhibited 50% of the cell growth (IC50) against MDA-MB-231 cell line (IC50 < 30 µg/mL).

scholarly journals Pengaruh Temperatur, Konsentrasi Katalis Dan Rasio Molar Metanol-Minyak Terhadap Yield Biodisel Dari Minyak Goreng Bekas Melalui Proses Netralisasi-Transesterifikasi

METANA ◽  
2018 ◽  
Vol 13 (1) ◽  
pp. 30
Author(s):  
Antonius Prihanto ◽  
T.A. Bambang Irawan
Keyword(s):  
Temperature Variation ◽  
Catalyst Concentration ◽  
Process Condition ◽  
Effect Of Temperature ◽  
Molar Ratio ◽  
Concentration Variation ◽  
Cooking Oil ◽  
Used Cooking Oil

Telah dilakukan penelitian tentang pembuatan biodisel dari minyak goreng bekas melalui proses netralisasi-transesterifikasi. Tujuan penelitian ini adalah untuk mengkaji pengaruh temperatur terhadap yield biodiesel, pengaruh konsentrasi katalis terhadap yield biodiesel dan pengaruh rasio molar methanol-minyak goreng bekas terhadap yield biodiesel melalui proses netralisasi dan transesterifikasi. Untuk mendapatkan kondisi proses transesterifikasi terbaik, maka dikaji pengaruh variasi suhu (30 oC, 40 oC, 50 oC, 60 oC, 70 oC), variasi konsentrasi katalis KOH (0,75 %, 1 %, 1,25 %, 1,5 %, 1,75 %) dan rasio molar metanol-minyak (6:1; 7:1; 8:1; 9:1; 10:1) terhadap yield biodiesel yang dihasilkan dari minyak goreng bekas. Hasil penelitian menunjukkan pada rasio 6 : 1, konsentrasi katalis KOH 1 % pada suhu 60 oC mengahasilkan yield biodiesel maksimal sebesar 87,3 %. Effect of Temperature, Catalyst Concentration and Methanol-Oil Molar Ratio Against Biodiesel Yield from Used Cooking Oil Through Neutralization Transesterification ProcessA research has been conducted on the making of biodiesel from used cooking oil through a neutralization-transesterification process. The purpose of this study was to examine the effect of temperature on biodiesel yield, the effect of catalyst concentration on biodiesel yield and the effect of molar ratio of methanol to used biodiesel yield through neutralization and transesterification process. To obtain the best transesterification process condition, the effect of temperature variation (30 oC, 40 oC, 50 oC, 60 oC, 70 oC), KOH catalyst concentration variation (0.75%, 1%, 1.25%, 1,5 %, 1.75%) and the molar ratio of methanol-oil (6: 1; 7: 1; 8: 1; 9: 1; 10: 1) to the yield of biodiesel produced from used cooking oil. The results showed at a ratio of 6: 1, the concentration of 1% KOH catalyst at 60 ° C resulted in a maximum biodiesel yield of 87.3%.

scholarly journals Alternative Raw Materials to Produce Biodiesel through Alkaline Heterogeneous Catalysis

Catalysts ◽  
2019 ◽  
Vol 9 (8) ◽  
pp. 690 ◽  
Author(s):  
Edgar M. Sánchez Faba ◽  
Gabriel O. Ferrero ◽  
Joana M. Dias ◽  
Griselda A. Eimer
Keyword(s):  
Heterogeneous Catalysis ◽  
Raw Materials ◽  
Fatty Acid Content ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Absolute Methanol ◽  
Solid Catalyst ◽  
Oil Refineries ◽  
Cooking Oil ◽  
Used Cooking Oil

Recent research focuses on new biodiesel production and purification technologies that seek a carbon-neutral footprint, as well as cheap, renewable and abundant raw materials that do not compete with the demand for food. Then, many attractive alternatives arise due to their availability or low-cost, such as used cooking oil, Jatropha oil (non-edible) or byproducts of vegetable oil refineries. Due to their composition and the presence of moisture, these oils may need a pretreatment to reach the established conditions to be used in the biodiesel production process so that the final product complies with the international quality standards. In this work, a solid catalyst based on 10 wt % sodium oxide supported on mesoporous silica SBA-15, was employed in the transesterification of different feedstocks (commercial sunflower and soybean oil, used cooking oil, acid oil from soapstock and Jatropha hieronymi oil) with absolute methanol in the following reaction conditions—2–8 wt % catalyst, 14:1 methanol to oil molar ratio, 60 °C, vigorous magnetic stirring and 5 h of reaction. In this way, first- and second-generation biodiesel was obtained through heterogeneous catalysis with methyl ester yields between 52 and 97 wt %, depending on the free fatty acid content and the moisture content of the oils.

Response Surface Methodology Optimization and Kinetic Study of Ultrafiltration-Enhanced, SCER-catalyzed Hydrolysis of Lard

2019 ◽  
Vol 17 (8) ◽  
Author(s):  
Enmin Lv ◽  
Shaoxuan Ding ◽  
Jie Lu ◽  
Zhuang Li ◽  
Lixiong Du ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Reaction Time ◽  
Response Surface ◽  
Membrane Separation ◽  
Molar Ratio ◽  
Transmembrane Pressure ◽  
Cleaning Efficiency ◽  
Membrane Cleaning ◽  
Exponential Factor ◽  
Hydrolysis Of

Abstract The integration process of polyethersulphone (PES) ultrafiltration with catalytic hydrolysis of lard was optimized by response surface methodology (RSM). The influences of molar ratio of water to lard, reaction time and transmembrane pressure on the fatty acids (FAs) yield were investigated. Results showed that the maximum FAs yield of 99.52 % was obtained under the optimized conditions of molar ratio of water to lard of 6.0:1.0, reaction time of 10.0 h and transmembrane pressure of 100.0 kPa. Moreover, the membrane cleaning efficiency was studied after four cleanings. Furthermore, the kinetic model of membrane separation process was investigated and the activation energy and pre-exponential factor were determined.

Optimization of melon oil methyl ester production using response surface methodology

2017 ◽  
Vol 2 (1) ◽  
pp. 1-10 ◽  
Author(s):  
O. S. Aliozo ◽  
L. N. Emembolu ◽  
O. D. Onukwuli
Keyword(s):  
Response Surface Methodology ◽  
Reaction Time ◽  
Methyl Ester ◽  
Response Surface ◽  
Research Work ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Reaction Conditions ◽  
Central Composite Designs ◽  
American Society

Abstract In this research work, melon oil was used as feedstock for methyl ester production. The research was aimed at optimizing the reaction conditions for methyl ester yield from the oil. Response surface methodology (RSM), based on a five level, four variable central composite designs (CCD)was used to optimize and statistically analyze the interaction effect of the process parameter during the biodiesel production processes. A total of 30 experiments were conducted to study the effect of methanol to oil molar ratio, catalyst weight, temperature and reaction time. The optimal yield of biodiesel from melon oil was found to be 94.9% under the following reaction conditions: catalyst weight - 0.8%, methanol to oil molar ratio - 6:1, temperature - 55°C and reaction time of 60mins. The quality of methyl ester produced at these conditions was within the American Society for Testing and Materials (ASTM D6751) specification.

Sign in / Sign up

Export Citation Format

Share Document