scholarly journals STUDY ON BED SHEAR STRESS IN LOCAL SCOUR HOLE AND SCOUR REDUCTION DOWNSTREAM OF BED PROTECTION WORKS

1999 ◽  
Vol 43 ◽  
pp. 617-622
Author(s):  
Keiichi KANDA ◽  
Ryusuke MORIMOTO
Keyword(s):  
Shear Stress ◽  
Local Scour ◽  
Bed Shear Stress ◽  
Scour Hole ◽  
Bed Protection

scholarly journals Scour around Bridge Piers: Numerical Investigations of the Longitudinal Biconcave Pier Shape

2018 ◽  
Vol 62 (4) ◽  
pp. 298-304 ◽  
Author(s):  
Bouabdellah Guemou ◽  
Abdelali Seddini ◽  
Abderrahmane Nekkache Ghenim
Keyword(s):  
Shear Stress ◽  
Flow Direction ◽  
Basic Mechanism ◽  
Horseshoe Vortex ◽  
Local Scour ◽  
Bridge Pier ◽  
Bed Shear Stress ◽  
Detached Eddy Simulation ◽  
Eddy Simulation ◽  
The Rich

The flow pattern around a bridge pier and the scouring phenomenon are very complicated. The basic mechanism causing local scour is the down-flow at the upstream face of the pier. It is understood that the horseshoe vortex is the key mechanism that leads to the local scour around pier; existing literature revealed that the strength of the down-flow, horseshoe vortex and the wake vortex are greater in the case of square piers compared to circular piers. In this paper we have investigated a new longitudinal biconcave bridge pier shape that reduces better the bed shear stress. For that purpose, a number of numerical simulations have been carried out using a Finite Volume Method (FVM) and for the turbulence model we have chosen the Detached Eddy Simulation (DES) for its capability to capture the rich dynamics of the horseshoe vortex at the upstream junction between the pier and the bed.The present study shows that the new longitudinal biconcave bridge pier shape reduces 10 % to 12 % the bed shear stress at the junction between the pier and the bed in other hand this shape increases the bed shear stress about 20 % but at a distance of D downstream the bridge pier in the flow direction.

Development of an Analysis Methodology for Pressure Flow Scour Under Flooded Bridge Decks Using Commercial CFD Software

2010 ◽  
Author(s):  
Dipankar Biswas ◽  
Steven A. Lottes ◽  
Pradip Majumdar ◽  
Milivoje Kostic
Keyword(s):  
Shear Stress ◽  
Turbulence Model ◽  
Critical Shear Stress ◽  
Scour Depth ◽  
Bed Shear Stress ◽  
Cfd Analysis ◽  
Flow Conditions ◽  
Pressure Flow ◽  
Scour Hole ◽  
Bridge Failure

Bridges are a significant component of the ground transportation infrastructure in the United States. With about sixty percent of bridge failures due to hydraulic causes, primarily scour, application of computational fluid dynamics (CFD) analysis techniques to the assessment of risk of bridge failure under flood conditions can provide increased accuracy in scour risk assessment at a relatively low cost. The analysis can be used to make optimum use of limited federal and state funds available to maintain and replace bridges and ensure public safety while traveling on the nation’s roads and highways during and after floods. Scour is the erosion of riverbed material during high flow conditions, such as floods. When scouring of the supporting soil around the piers and abutments of bridges takes place, risk of bridge failure increases. A simulation methodology to conservatively predict equilibrium shape and size of the scour hole under pressure flow conditions for flooded bridge decks using commercial CFD software was developed. The computational methodology has been developed using C++ to compute changes in the bed contour outside of the CFD software and generate a re-meshing script to change the bed boundary contour. STAR-CD was used to run the hydrodynamic analysis to obtain bed shear stress, and a BASH script was developed to automate cycling between computing bed shear stress with the CFD software and computing changes in the bed contour due to scour predicted using the computed shear stress for the current bed contour. A single-phase moving boundary formulation has been developed to compute the equilibrium scour hole contour that proceeds through a series of quasi-steady CFD computations. It is based on CFD analysis of the flow fields around the flooded bridge deck and shear stress computed at the bed modeled as a rough wall. A high Reynolds number k-ε turbulence model with standard wall functions, based on a Reynolds-Averaged Navier-Stokes (RANS) turbulence model, was used to compute bed shear stress. The scour sites on the bed were identified as those sites where the computed shear stress exceeded the critical shear stress computed from a published correlation for flat bed conditions. Comparison with experimental data obtained from the Turner-Fairbank Highway Research Center (TFHRC), McLean, VA, USA, revealed larger discrepancies than anticipated between the bridge inundation ratio and the scour hole depth. Although scour hole slopes were small for the cases tested, a correction to critical shear stress to account for bed slope was also tested. It did not significantly improve the correlation between CFD prediction and experimental observations. These results may be a consequence of using only excess shear stress above critical as a criteria for scour when other physical mechanisms also contribute to the initiation of scour. Prediction of scour depth using federal guidelines over predicts scour depth by as much as an order of magnitude in some cases. Over prediction is acceptable for purposes of ensuring bridge safety. CFD methods for scour prediction can be a significant improvement of current methods as long as under prediction of scour depth is avoided. Conservative scour prediction using CFD methods can be achieved by using conservative values of parameters such as critical shear stress and effective bed roughness.

scholarly journals Hazards due to large wood accumulations: Local scour and backwater rise

2018 ◽  
Vol 40 ◽  
pp. 02003 ◽  
Author(s):  
Isabella Schalko ◽  
Lukas Schmocker ◽  
Volker Weitbrecht ◽  
Robert M. Boes
Keyword(s):  
Shear Stress ◽  
Flood Hazard ◽  
Local Scour ◽  
Bridge Piers ◽  
Bed Shear Stress ◽  
Large Wood ◽  
Flume Experiments ◽  
Governing Parameter ◽  
Bed Material ◽  
Movable Bed

Large wood (LW) in rivers increases the flow variability and provides habitats for various species. During flood events, transported logs can accumulate at river infrastructures and increase the flood hazard. LW accumulations result in an upstream backwater rise and may increase local scour, for instance at bridge piers. Consequently, estimates of the resulting backwater rise and local scour are necessary to improve the flood hazard assessment. This study presents the findings of flume experiments with a movable bed on local scour and backwater rise due to LW accumulations. The approach flow conditions and the bed material were varied systematically for a specific LW accumulation volume. For all experiments, the initial condition for the bed material was defined as weak transport, since the bed shear stress was slightly below the critical bed shear stress for incipient motion. The inflow Froude number was identified as the governing parameter for backwater rise due to LW accumulations. The present study confirms the hypothesis that the resulting local scour reduces backwater rise. For the local scour, the unit discharge and the grain size diameter are the decisive parameters.

Modelling of three-dimensional flow velocities in a deep hole in the East Channel of the Mackenzie Delta, Northwest Territories

2007 ◽  
Vol 34 (10) ◽  
pp. 1312-1323 ◽  
Author(s):  
Bahram Gharabaghi ◽  
Chris Inkratas ◽  
Spyros Beltaos ◽  
Bommanna Krishnappan
Keyword(s):  
Shear Stress ◽  
Three Dimensional ◽  
Bed Shear Stress ◽  
Mackenzie Delta ◽  
Stress Distributions ◽  
Deep Hole ◽  
Flow Conditions ◽  
Scour Hole ◽  
Scour Holes ◽  
The Stability

The Mackenzie River has several anomalous deep scour holes in a number of river channels in its delta. Proposed gas pipeline crossings have renewed interest in studying the stability of these scour holes. The main goal of this research project was to study flow velocity and bed shear stress distributions for a 30 m deep hole in the East Channel of the Mackenzie Delta as a first step toward assessing the stability of the scour hole and the risk of its migration during various flow conditions. In this study, a three-dimensional (3D) finite element flow model, FLUENT, using the renormalization group (RNG) k-ε turbulence model (where k is the turbulent kinetic energy and ε is the turbulence dissipation rate) was set up for the scour hole and calibrated using detailed measurements of 3D flow velocities, obtained with an acoustic doppler current profiler. The numerical model was then applied to predict flow velocity and bed shear stress distributions in and around the scour hole for three flow conditions (720, 1000, and 1400 m3/s). Results indicate that two vortices are formed in the river elbow above the scour hole. As the flow rate changed, the sizes of the vortices varied. The region upstream of the hole experienced the greatest magnitudes of bed shear stress.Key words: computational fluid dynamics, finite element, bed shear stress, deep hole, flow reversal.

Efficient non-hydrostatic modelling of flow and bed shear stress in a pier scour hole

2014 ◽  
Vol 41 (5) ◽  
pp. 450-460 ◽  
Author(s):  
S. Pournazeri ◽  
S.S. Li ◽  
F. Haghighat
Keyword(s):  
Experimental Data ◽  
Shear Stress ◽  
Local Maximum ◽  
Bedload Transport ◽  
Bed Shear Stress ◽  
Pier Scour ◽  
Law Of The Wall ◽  
Scour Hole ◽  
The Law ◽  
Wall Method

Predicting 3-D flow in a pier scour hole and the associated bed shear stress τb is important for the safe and economical design of bridge piers. This paper combines layered, hydrostatic hydrodynamic computations with non-hydrostatic pressure corrections, exploring a new modelling approach for efficient and reliable predictions of 3-D flow velocity. The law of the wall method is used for estimating τb. Its suitability for incorporation into layered models for bedload transport and pier scour simulations is also discussed. The predicted flow shows realistic features: strong downward flow adjacent to the upstream nose of a circular pier, vortex motions in the vertical and horizontal direction, and meandering flow wakes. The velocity results compare well with available experimental data. In the approach region, τb is uniform. It attains a local maximum immediately before flow enters the scour hole and then drops non-linearly in the scour-hole region toward the pier. In the wake region, τb has very low values. The τb predictions are consistent with the experimental data. In multi-layer models, when applying the law of wall method, one should use near-bed velocities as opposed to bottom-layer velocities to obtain more reliable τb estimates and avoid noisy results, which can cause a numerical instability problem in bedload transport simulations.

scholarly journals The 3-D Morphology Evolution of Spur Dike Scour under Clear-Water Scour Conditions

Water ◽  
2018 ◽  
Vol 10 (11) ◽  
pp. 1583 ◽  
Author(s):  
Li Zhang ◽  
Hao Wang ◽  
Xianqi Zhang ◽  
Bo Wang ◽  
Jian Chen
Keyword(s):  
Shear Stress ◽  
Morphological Evolution ◽  
Golden Section ◽  
Evolution Process ◽  
Bed Shear Stress ◽  
Clear Water ◽  
Power Functions ◽  
Spur Dike ◽  
Evolution Characteristics ◽  
Scour Hole

By changing the alignment angle of spur dike, this study focused on the evolution of scour hole morphology in three alignments under clear-water scour conditions, including the 3-D structure of the scour hole, 2-D profile morphological evolution process and the evolution characteristics of the local bed shear stress. The results show that the plane area and volume of the scour hole both are power functions over time, which is similar to the evolution characteristics of scour depth. Local scour includes three stages: The initial stage, development stage and balance stage. The local bed shear stress presents successively: τb > τc, τb = τc and τb < τc. Based on this characteristic, the evolution mechanism between scour hole morphology and the local bed shear stress is further clarified. Furthermore, although the alignment of the spur dike significantly affects the longitudinal and vertical dimension erosion rates of the scour hole, the scour hole morphology is not only relatively constant but also has a specific proportion, and the evolution process is orderly in the whole process of evolution. To the scouring equilibrium state, the length of the scour hole on the upstream and downstream of the spur dike is approximately in line with the golden section feature. The related results provide technical support for scour parameter design and scour hole protection of spur dike in flood period.

scholarly journals Three-Dimensional Numerical Investigations of the Flow Pattern and Evolution of the Horseshoe Vortex at a Circular Pier during the Development of a Scour Hole

2021 ◽  
Vol 11 (15) ◽  
pp. 6898
Author(s):  
Ahmed M. Helmi ◽  
Ahmed H. Shehata
Keyword(s):  
Shear Stress ◽  
Flow Structure ◽  
Three Dimensional ◽  
Turbulence Models ◽  
Horseshoe Vortex ◽  
Bed Shear Stress ◽  
Scour Hole ◽  
Scouring Depth ◽  
Mean Size ◽  
Stress Variations

In the current study, a three-dimensional CFD model is utilized to investigate the variation of the flow structure and bed shear stress at a single cylindrical pier during scour development. The scour development is presented by seven solidified geometries of the scour hole, collected during previous experimental work at different scour stages. Different turbulence models are evaluated and the (k-ω) model is chosen due to its relative accuracy in capturing the flow oscillation and vortex shedding at the pier downstream side with personal computer computational and storage resources. The numerical results are verified against dimensionless parameters from different previous experimental works. This research describes in detail the flow structure and bed shear stress variations through seven stages of the scour hole development. The dimensionless area-averaged circulation coefficient (Ψi) is developed to evaluate the changes in the vortex strength through the scouring process by eliminating the calculation area effect. It was concluded that the circulation in the (Y) direction is the main driving factor in the development of the scour hole more than the circulation in the (X) direction. The ratio between the horseshoe vortex (HV) mean size and the scouring depth (DV/dS) in addition to the location of the maximum bed shear stress are investigated during different stages of the scour development.

Efficiency prediction for storage chambers using computational fluid dynamics

1996 ◽  
Vol 33 (9) ◽  
pp. 163-170 ◽  
Author(s):  
Virginia R. Stovin ◽  
Adrian J. Saul
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Shear Stress ◽  
Particle Tracking ◽  
Critical Value ◽  
Complex Geometries ◽  
Bed Shear Stress ◽  
Breadth Ratio ◽  
Computational Fluid Dynamics Cfd ◽  
Simulated Flow

Research was undertaken in order to identify possible methodologies for the prediction of sedimentation in storage chambers based on computational fluid dynamics (CFD). The Fluent CFD software was used to establish a numerical model of the flow field, on which further analysis was undertaken. Sedimentation was estimated from the simulated flow fields by two different methods. The first approach used the simulation to predict the bed shear stress distribution, with deposition being assumed for areas where the bed shear stress fell below a critical value (τcd). The value of τcd had previously been determined in the laboratory. Efficiency was then calculated as a function of the proportion of the chamber bed for which deposition had been predicted. The second method used the particle tracking facility in Fluent and efficiency was calculated from the proportion of particles that remained within the chamber. The results from the two techniques for efficiency are compared to data collected in a laboratory chamber. Three further simulations were then undertaken in order to investigate the influence of length to breadth ratio on chamber performance. The methodology presented here could be applied to complex geometries and full scale installations.

scholarly journals Enhancing scour protection in river bends: a novel slotted bank-attached vane

2020 ◽  
Vol 20 (6) ◽  
pp. 2175-2184
Author(s):  
Mohamad Azizipour ◽  
Farshid Amirsalari Meymani ◽  
Mohammad Mahmoodian Shooshtari
Keyword(s):  
Effective Area ◽  
Local Scour ◽  
Flume Experiments ◽  
Rectangular Slot ◽  
Outer Bank ◽  
Scour Hole ◽  
Submerged Vane ◽  
River Bends ◽  
Scour Protection ◽  
Control Erosion

Abstract One of the most effective approaches for bank control erosion is using bank-attached vanes. In spite of the superiority of the bank-attached vanes to spur dikes, the vanes' tips are still vulnerable to local scour caused by flow–structure interaction. In this study, slotted bank-attached vanes are proposed to reduce local scour at the tip of the triangular submerged vane. For this, a rectangular slot is created parallel to the chord of the vane with an area of ten percent of the effective area of the vane surface. Two types of conventional vanes and slotted vanes were installed at different angles of attack of 23, 30, 40 and 60 degrees in an arch flume. Experiments were carried out in clear water conditions with different flow regimes with Froude numbers of Fr = 0.287, 0.304 and 0.322. The results show that the slotted vane outperforms the conventional vane by reducing maximum scour depth by about 70, 20, 17 and 54 percent for different angles of attack of 23, 30, 40 and 60 degrees, respectively. The proposed slotted vane also resulted in reduction of scour hole volume around the vane and formed the scour hole away from the outer bank.

Sign in / Sign up

Export Citation Format

Share Document