scholarly journals Dynamic Tsunami Generation Process by the 2003 Tokachi-Oki Earthquake

2008 ◽  
Vol 55 ◽  
pp. 336-340
Author(s):  
Tatsuo Ohmachi ◽  
Shusaku Inoue ◽  
Tetsuji Imai
2020 ◽  
Vol 14 (04) ◽  
pp. 2050018 ◽  
Author(s):  
Chentong Hu ◽  
Yifan Wu ◽  
Chao An ◽  
Hua Liu

Tsunamis are generated primarily by the vertical displacement of the seafloor if the seafloor is flat. If the seafloor is slanted, the horizontal motion also contributes to the generation of tsunamis. A previous study proposed that such effects can be estimated by simply calculating the elevation of water due to the horizontal displacement of the slope. Two more studies later argued that the horizontal motion also results in horizontal momentum of the water, which amplifies the tsunami generation. In this study, we numerically simulate the tsunami generation process of flat and sloping seafloor. It is found that, for the flat seafloor, the initial water elevation equals the vertical seafloor displacement. For the sloping seafloor, the initial water elevation deviates from the vertical seafloor displacement, and the difference can be accurately evaluated by the horizontal seafloor displacement. Thus, the initial horizontal momentum of the water is negligible for tsunami generation.


2012 ◽  
Vol 56 ◽  
pp. 43-56 ◽  
Author(s):  
Denys Dutykh ◽  
Dimitrios Mitsotakis ◽  
Leonid B. Chubarov ◽  
Yuri I. Shokin

2020 ◽  
Author(s):  
Yifan Zhu ◽  
Chao An ◽  
Teng Wang ◽  
Hua Liu

Abstract The eruption of the Anak Krakatau volcano, Indonesia, on 22 December 2018 induced a destructive tsunami (the Sunda Strait tsunami), which was recorded by four nearby tidal gauges. In this study we invert the tsunami records and recover the tsunami generation process. Two tsunami sources are obtained, a static one of instant initial water elevation and a time-dependent one accounting for the continuous evolution of water height. The time-dependent results are found to reproduce the tsunami recordings more satisfactorily. The complete tsunami generation process lasts approximately 9 min and features a two-stage evolution with similar intensity. Each stage lasts about 3.5 min and elevates a water volume of about 0.15 km 3 . The time, duration and volume of the volcano eruption in general agree with seismic records and geomorphological interpretations. We also test different sizes of the potential source region, which lead to different maximum wave height in the source area, but all the results of time-dependent tsunami sources show the robust feature of two stages of wave generation. Our results imply a time-dependent and complex process of tsunami generation during the volcano eruption.


2014 ◽  
Vol 2014 ◽  
pp. 1-27 ◽  
Author(s):  
Allam A. Allam ◽  
M. A. Omar ◽  
Khaled T. Ramadan

Tsunami generation and propagation caused by stochastic seismic fault driven by two Gaussian white noises in the x- and y-directions are investigated. This model is used to study the tsunami amplitude amplification under the effect of the noise intensities, spreading uplift length and rise times of the three-dimensional stochastic fault source model. Tsunami waveforms within the frame of the linearized shallow-water theory for constant water depth are analyzed analytically by transform methods (Laplace in time and Fourier in space). The amplification of tsunami amplitudes builds up progressively as time increases during the generation process due to wave focusing while the maximum wave amplitude decreases with time during the propagation process due to the geometric spreading and also due to dispersion. The maximum amplitude amplification is proportional to the propagation length of the stochastic source model and inversely proportional to the water depth. The increase of the normalized noise intensities on the bottom topography leads to an increase in oscillations and amplitude in the free surface elevation. We derived and analyzed the mean and variance of the random tsunami waves as a function of the propagated uplift length, noise intensities, and the average depth of the ocean along the generation and propagation path.


2009 ◽  
Vol 9 (1) ◽  
pp. 217-227 ◽  
Author(s):  
V. I. Pavlov ◽  
J. Tromp ◽  
E. P. Tito

Abstract. The Hamiltonian method is applied to the problem of tsunami generation caused by a propagating rupture front and deformation of the ocean floor. The method establishes an alternative framework for analyzing the tsunami generation process and produces analytical expressions for the power and directivity of tsunami radiation (in the far-field) for two illustrative cases, with constant and gradually varying speeds of rupture front propagation.


1994 ◽  
Vol 5 (3) ◽  
pp. 231-235
Author(s):  
O. V. Kostitsyna ◽  
M. A. Nosov ◽  
N. K. Shelkovnikov

Author(s):  
Tetsuji IMAI ◽  
Tatsuo OHMACHI ◽  
Shusaku INOUE

2019 ◽  
Vol 56 (4) ◽  
pp. 801-811
Author(s):  
Mircea Dorin Vasilescu

This work are made for determine the possibility of generating the specific parts of a threaded assembly. If aspects of CAD generating specific elements was analysed over time in several works, the technological aspects of making components by printing processes 3D through optical polymerization process is less studied. Generating the threaded appeared as a necessity for the reconditioning technology or made components of the processing machines. To determine the technological aspects of 3D printing are arranged to achieve specific factors of the technological process, but also from the specific elements of a trapezoidal thread or spiral for translate granular material in supply process are determined experimentally. In the first part analyses the constructive generation process of a spiral element. In the second part are identified the specific aspects that can generation influence on the process of realization by 3D DLP printing of the two studied elements. The third part is affected to printing and determining the dimensions of the analysed components. We will determine the specific value that can influence the process of making them in rapport with printing process. The last part is affected by the conclusions. It can be noticed that both the orientation and the precision of generating solid models have a great influence on the made parts.


Author(s):  
Yuhki TSURUDOME ◽  
Taro KAKINUMA ◽  
Tetsuya TANEDA
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document